Hard work Pays off! This DA integra isn’t Clownin around 🤡
Вставка
- Опубліковано 13 жов 2024
- Lewis has worked super hard and made all the changes he needed to to get on the dyno. Once we installed his boost kit and worked through a corrupted file we put the smack down on this bad boy and it paid off. Being right at the limit of the clutch we ended up backing it down a bit and sent it home rippen !
import face-off comment here to let them know if we should twin turbo the Nsx
• New England IFO 2019 w...
Thank you to all our sponsors and friends
www.astrotools....
www.usaweld.co...
street2track.net/
Merch and the parts we use are available at
pfispeed.com/
Also check out and subscribe to boostedboiz at
/ @boostedboiz
Send things to
Pfispeed
P.O. Box 503
Wellington,CO
80549
Whoa this things a beast
Its mine thanks and ya it was on your back round one time look so dope i watch your videos also i just started missing with mine again its under still clownin integra
Was that da sleeved LS
@@williamworkman4520 no it has the css block gard
Still clown'in what compression pistons you running ?
@@jdmbuilt9258 just very little over its 82mm pistons
that monster needs new mounts that engine moves so much lol
It probably is missing the front mount due to the turbo piping.
Call me immature but I laughed when he said “Feed her some duty” 😂
Lol... "Doody"
me too lol.i giggled and then though good lawdy i'm such a child lol
Glad I’m not the only one :D
Me too….lol
Holy...... that DA was wanting to just keep on climbing 🧗♂️! It’s awesome to see how well you take care of everybody’s cars by setting them up with a “street” tune. A lot of shops will tune to the max and send em out! PFI Speed always treating each car as their own 👍🏼
"all i did is fill in the hole "😂😂😂
I just love seeing all of the sick builds that roll up in the shop 🔥
too cool. i love you guys yo.
"he has the boost kit in his hand and i mean i got the soldering stuff."
next scene: got the boost controller hooked up.
plenty of other instances like that on this channel, makes it a real pleasure to watch these vids. Also makes me wish I was out there in CO making some jam with y'all!
Love seeing people still rocking these older platforms. I had an 89 Prelude Si years back and it's still probably my favorite car of all the cars I've owned.
Had one too, loved driving that car, was new the day I graduated.
these videos and all other content make my days just cos i work 3rd shift (11pm-7am) and usually i can’t sleep right away so these are very therapeutic to watch in the morning
It's great to see that it's not All Out Horsepower. But tune it right for the build. Great stuff guys! Love your knowledge.
Jamie is such an A1 dude
Another Awesome PFi tune video with a cool little Rad Teggy. 620+whp Nice👍 That's one more hotrod out there with a magic tune from the Master Himself... PFiSpeed/BoostedBoiz Rcks! 🤜🤛😎🔰🔰🔰💪
Lol lov'd the front windshield sticker but Ain't No Clowning Now!!!
Man listening to the engines on the dyno. Its like therapy. Keep up the great videos!
Good old Bret never ceases to put a smile on my face ! What a great guy he is, and Jamie too !!!
Bret
@@skaterXYZ lol it's all good we know Davo meant Brent Leivestad
I always learn something when I watch these tuning vids. You guys are awesome.
The da’s are so under appreciated it’s such a sick car I love mine people always asking wtf it is
The Da is legendary. I have one. Last time I went to get tires, the guy who installed them asks me. "Is that a GSR?" I answered "not yet" lol.... He looked really disappointed ☹️
Always nice. I learn small tech tips each time
Sup Brent. Got the meet you at import vs domestic. I’m the guy that you lended a funnel 2. Not quite the W but you guys had no quit. Love to see the crew in Cali more
We had a ton of fun and learned a lot. It was a great time and great meeting everyone . Thank you for coming out .
PFI Speed you guys are great. Really had a aura around you guys. It was cool seeing you guys just doing your thing. Not around your crazy regular crowd but handling business and greeting individual fans
“It’s wicked cool man” see you picked up some New England slang lol!
Who can dislike a PFI video ffs, you come for good vibes, tuning, pop bangs flames, sho’nuff and smiles, and thats exactly what you get
Indeed 🤜🤛
Awesome rep for the DA family! Awesome tune, Brent!
Can't wait to boost my DA.
i see brent i hit like
Haha looks like the cars gunna tear in half when your flooring it!🤣😎
PFI Speed and the Boyz always keeping me motivated to get back in the garage and turn some wrenches 🔧 until the work is done ✅ 👏🏼 👏🏼 👏🏼
Got to get some motor mounts on that little monster
I love these old integras! The early 90's square body I love them!
Just saw Roman roamin’ around the shop!
Emilio and Roman be slackin while Kyle is away! LOL
I have the same fuel rail and pressure regulator. They are still working great since 2015.
1:32 Panchie sticker!
😔
sad to see him gone 😢
Holy shit man! Things crazy cool, love the vids
Ah the DA Integra, My first car! good times. i just rebuild the B18 and suspension in it, i would love to go LS/V but its hard to give all the projects attention, Still need to get a IACV for my K24 EP3.
Always look forward to your thanks brent and jamie
Channel deserves way more views and subs
Hell yeah good to see da integras still around!
Always great to see Brent cheer when a car puts up a great number.
That garage you guys are in is awesome 😎
Beautiful build man love DAs! Monster build!!
Dear god.... Brent, hook him up a new pitch mount my guy 😂
Awesome video
Just clowning around 😀👌👌👌
Common Craig! haha dude I fucking love you guys. I've never seen someone other than myself be this way about cars, more specifically properly built Hondas.
As soon as I saw the coil on plug I was like “it’s gonna make some jam” .
Yea that integra is going to boogie!!
Damn that's one rowdy Integra!!
Epic tunner Brent hell yeah brother 👊
Car is sick .. that engine bay color is freaking 🔥 nice
I miss seeing DA's driving around with chrome 3star in full reverse offset.
Just love how the vtec sounds on a B series
Siick DA. Man I miss mines 😩
Builds whole car: neglects to put new motor mounts in 🙄
Austin Bennett all my cars have had solid motor mounts so far and I could never imagine, just seeing it move alone scares me lol
Hell yea da integra cant wait to get mine out, goal is 700whp
3:23 Gonna start feeding her some doodie. 2 girls 1 cup action on this DA! Like it.
SCREAMING YELLOW GIRAFFE FETUS!
That thing rips! Let's go
I still get a chuckle every time I see one off these 4 bangers make 500 +at the treads. I often wonder how many realise just how powerful that is. Possibly we are getting a tad immune from all these numbers being thrown around.
I agree. Lol it is way rad , the tech gets better and better .
It needs a channel I’d like to see this car a lot more
I do have a channel but im about two get going with it more its under still clownin integra
Still clown'in ok I’ve subscribed
@@stillclownin176 interested in a different insert for that hks bov? I designed a couple for the one on my car. I wasn't satisfied with the two options hks sells.
@@sinformant ant bad what you have
@@stillclownin176 I got a cobalt ss with a little bit of work done to it and a tune running a ssqv4 as the stock bypass valve wouldn't hold past 20 psi. Currently sitting waiting to have the time to drop in the new better motor. The two.inserts I made one makes a louder whoosh and a much louder whistle than the original hks insert. The other one makes a high pitched whistle under higher boost, and an eagle screech under low boost and vacuum shifts. Both are pretty loud. You can here them blocks away. Or at least they are on my car.
Me: show me your “oh” face
PFI Speed: gotchoo, you seen the thumbnail?
Me: 🍻
Leland Holton 😂🤣 cheers! 😲
“Show me your war face”
1:34 RIP PANCHIE
Aye just out of curiosity, whats like general dyno protocol if say Brent’s tuning your car and your engine happens to blow up for some reason?
Clean it up and push it on the trailer.
Hondaru just chilling back there
That thing needs motor mounts BAD!!!!!!
I have a set of 1992-93 Integra GSR Hasport mounts in u70a sitting on the shelf. I bought them when Hasport first started making them so they are for a cable transmission setup. I used them for a month before I bought my second DB2 Integra. Never got around to installing them. They look brand new.
Some day I hope I could meet you guys are great at what you do an I enjoy watching everything you do
nice tune
Haha Brent said duty! Lol
I'm a sucker for a nice DA. I've got one myself. I've had a few of them 🤘🔰
Is cop better then the stock distributor. I put the stock coils back on my dsm and it runs about the same. Maybe a bit smoother.
Nice hp numbers, nice ride, beastly :)
Always like before you watch! You know it's going to be a great video!👍. Love that click bait!!!!
IS that bottom end built? Like to know the specs. I'm guessing its built but how built, sleeved and all the bells and w h istles? Some dudes push those LS/Vs far lol.
Wats the small hick ups a idle from? Tight plug gap?
Rev Limiter : no one ever
Brent: always
We have to know 😉
Hey can’t blame you homie
♥️ that ending og sub now I can sleep good tonight keep up the great job PFI er for life
Thank you guys yes i know i need motor mounts and soon and sorry on lug nut this dyno was planed at the last min lol but we send it for my boys rip and for me i loved the out come and wish 730 but hopefully soon after i can afford a twin disk clutch but i do have a goup page its still Clown'in and a like page and also and Instagram under still_clownin so check me out and thanks for all the love on here that gave me it
What letter is the apostrophe replacing in your name? It should be clownin'.
That was just badass, Brent is the man!! and Jaime, sorry bro, haha Keep up the great work. as always SicSix6420ca
Those big rear view mirrors seem like safety hazards. Once you get used to that big mirror you'd feel kind of lost if you got in a car with a regular mirror. Every time you look up your mind would be clouded for a second or two until you got your bearings straight.
Needs solid mounts for sure!
After all that work he goes to launch it in the motor launches right out of the hood
i have 93 da we only have 93 octane in maryland how much power will Ls engine make normally versus Ls with vtec head and of course built bottom end??
Omg thumbnail game on point
Sick🤙
good little turbo
Another day at the office!
Bet the torque curve is crazy on this.
You should put the torque spec on the graph
This makes me want to get my da out and running again
pennsylvaniapatriot what’s wrong with yours?
@@tyler238 clutch, trans and an alignment. I have a trans just need to get the clutch and do the work lol
Are there tuner contests? Is that a thing? Should be.
love the daily uploads
The freaking captions said this sodomy cool me hahahaha
Right at the first of the video
Loop Koop 😂🤣 oops
@@PFIBrent not your fault man just UA-cam being UA-cam as normal lol
Did love the video btw!
engine mounts asap, that thing is gonna leave the car behind one day, coyote style
Took those 600+ hits like a champ. I think it was smoking less when it left aswell lol
#PFBOIZ #KSWAPTER DAAAAAAAAAAAAAAAAAAAAA DA
Love the Vtec crossover 😍
When u guys putting the AWD dyno in the ground?
Dcool maybe in the spring. I’ll just have shut down for a week and half. It’ll take some planning
I bet it would burn rubber in 5th.
The thumbnail 😂
Needs mounts...those are worn BIG time. SO much movement...he should hit up Brian @ HASPORT and it will be solved under 400 bucks.
On a side not, another great tune man
Thank u and ill look in two it asap because twin then more power soon
@@stillclownin176 that twin will do wonders...you may have to go back and have them give it some more juice because it sure will hold it after that ✊🏼
Ya im hoping soon we need that 700 mark atleast 😔 just got two save for a twin disk some how
@@AnalogAssassin1 you know his full email for motor monts
I love the videos . Where is your shop located. I have a 8th gen civic si . With cams injectors full race exhaust.plm header . Was abandoned by vit viper a while back . Tune in progress . Can’t find a tuner here in Knoxville TN that anyone trust .
Do you do any Datalog tuning . Or only on sit dyno tuning ?
Both, we have a dyno going in around Nashville right now 😉
sleeved or stock sleeves? Reason I ask is that I'm getting my car tuned next week. How much hp can stock b18c sleeves take? Motor is built, but sleeves are still stock like I mentioned.
Thanks in advance! P.S. car is running on E85
This is a css. , Jamie makes 600hp,
Stock sleeves even with a block guard can be hit or miss. Just feel it out and work into things.
@@PFIBrent Thanks guys for the quick reply!
i just got my can of coke, c'mon Brent bring it on
Can? I usually get mine in bags
one more happy man oo my PFI
620hp is just crazy to think about but its almost average in today's age.Shit I was killing the streets with 350 rwhp just 10 years ago
Lol Right I remember those days as well as down in Sav, Ga. before the fast and furious lol 1999-2002 rippin around my 240hp all Motor 95 civic ex along with my 300+hp turbocharged 92 Acura Integra... Good Times!