That anonimus is impressive. Doesn’t seem like the most ergonomic knife, especially for bushcraft work, but man, is it tough. Between this and the DBK video, I’m super impressed with how tough it is and how well it holds an edge. Benchmade is doing cru-wear right, no doubt about it.
I just received my Anonimus in the mail. I purchased it because I wanted to try the CPM-CruWear alloy & also, because I used the rewards points from my Cabela Card, it was free to me. It will be a thin, light, high quality slicing blade for EDC.
I just want to say I've been shopping at your store for years when I make it down that way. I really like where your taking the youtube channel starting to compete with say BladeHQ and similar companies in the youtube department keep it up.
I've seen a lot of wild things with knives, but I've never seen anyone use a knife to chop bricks. 😁 The capabilities of Cruwear are impressive. I was afraid that with such a high hardness the blade would break from impact loads, but fortunately this did not happen. Now I love my Benchmade Mini Adamas even more.
The Cru wear is tougher but that is to be expected. MagnaCut is going to be better for water resistance and normal cutting task but the Cru Wear stands up better to heavier-duty cutting tasks.
Hello SMKW, Hey TC, with the last sharpness text you used "the Force" just as you were taught! Be safe and take care, "God Bless", sincerely, Randy. 🙏😇👊
Yeah I agree, open some cans up to see how it holds up, in the bush I would most likely use it to open up cans not so much cutting bricks although that is quite impressive. I know opening up cans can be pretty hard on knives, also may I suggest like some of the comments that you try sharpening it with a field sharpener or strop, this would help in my decision making when I purchase a knife ( I already purchased this blade months ago since I am impressed with cru wear and am now waiting for my survive gso 5.1 in magnacut). First video where we see this steel really get put to the test. I have to admit that the screeching "next" was annoying me but others seem to have enjoyed it. P.s can you make a video so we can see how difficult it would be to resharpen the steel after taking that much abuse?
Opening cans would be like the steel sheets we cut. True you might not find carpet or vinyl in the field but you will find vines and maybe trash to build shelters from and most people are more likely to use these on a job site.
The tip test and watching you hammer that blade through the brick hurt somewhere deep inside of my heart. It was hard to even watch, but that’s just one knife guy to others. Well done and thank you for destroying yours so I know what mine can handle. Great video overall.
Now that is impressive! Would this be considered a top of the line bushcraft knife? Or is there better? i still don't own a bushcraft blade and i always like to buy the highest quality.
Fun testing, great results with that cruwear, NOW, get out that new work sharp pro and bring that bad boy back to less than 200 grams on that bess tester TC, haha.
Why did you clearly score the flooring before hand? You can see its already been scored before you cut it!? I love cruwear, but yea that thing is way to thin of a handle
Hello mon ami 🫡 c'est très bien il faut toujours porter ces équipements de protection individuelle😂😂 le casque est phénoménal 🚀 vidéo très intéressante très bon test du couteau cela nous fait une idée sur la qualité et la dureté de l'acier du couteau Si on doit acheté se couteaux on sera se que l'on n'aura acheter 💯
That anonimus is impressive. Doesn’t seem like the most ergonomic knife, especially for bushcraft work, but man, is it tough. Between this and the DBK video, I’m super impressed with how tough it is and how well it holds an edge. Benchmade is doing cru-wear right, no doubt about it.
It is tough and may not be made for Bushcrafting but it will stand up to the test of the outdoors 👍
Doesn’t SEEM ergonomic? 😂 you’ve prob never even held one
I just received my Anonimus in the mail. I purchased it because I wanted to try the CPM-CruWear alloy & also, because I used the rewards points from my Cabela Card, it was free to me. It will be a thin, light, high quality slicing blade for EDC.
I just want to say I've been shopping at your store for years when I make it down that way. I really like where your taking the youtube channel starting to compete with say BladeHQ and similar companies in the youtube department keep it up.
Cru ware is the stuff!!
Cru-Wear is sweet!
I've seen a lot of wild things with knives, but I've never seen anyone use a knife to chop bricks. 😁
The capabilities of Cruwear are impressive. I was afraid that with such a high hardness the blade would break from impact loads, but fortunately this did not happen. Now I love my Benchmade Mini Adamas even more.
Very nice strong 💪 knife! Love that safety gear!!!
🙌🙌🙌
Great show again! How would you say the Cru did compared to the magnacut on the heretic you did a few months ago?
The Cru wear is tougher but that is to be expected. MagnaCut is going to be better for water resistance and normal cutting task but the Cru Wear stands up better to heavier-duty cutting tasks.
In about 2 weeks the family and I are coming to wmkw can't wait 😅
If you have never been there, man try and plan a whole day, it is amazing!
Thanks for making us a part of your trip! We are open 10AM-6PM
Hello SMKW, Hey TC, with the last sharpness text you used "the Force" just as you were taught! Be safe and take care, "God Bless", sincerely, Randy. 🙏😇👊
Thanks for watching Randy!
Yeah I agree, open some cans up to see how it holds up, in the bush I would most likely use it to open up cans not so much cutting bricks although that is quite impressive. I know opening up cans can be pretty hard on knives, also may I suggest like some of the comments that you try sharpening it with a field sharpener or strop, this would help in my decision making when I purchase a knife ( I already purchased this blade months ago since I am impressed with cru wear and am now waiting for my survive gso 5.1 in magnacut). First video where we see this steel really get put to the test. I have to admit that the screeching "next" was annoying me but others seem to have enjoyed it.
P.s can you make a video so we can see how difficult it would be to resharpen the steel after taking that much abuse?
Opening cans would be like the steel sheets we cut. True you might not find carpet or vinyl in the field but you will find vines and maybe trash to build shelters from and most people are more likely to use these on a job site.
The star wars helmet is hilarious
Is that where that is from...🤣
Hello! When will you do the same test with Magnacut?
Sacrilege! I tell you, Sacrilege. This was so painful to watch,but I think I want one of those knives.
If it can stand up to TC you know it can stand up to every day trail and camp jobs
That was awesome
Thanks for watching Phil!
The tip test and watching you hammer that blade through the brick hurt somewhere deep inside of my heart. It was hard to even watch, but that’s just one knife guy to others. Well done and thank you for destroying yours so I know what mine can handle. Great video overall.
Thanks for watching! We love doing these because for we get to do al things we normally would get in trouble for lol
Now that is impressive! Would this be considered a top of the line bushcraft knife? Or is there better? i still don't own a bushcraft blade and i always like to buy the highest quality.
One of our favorite quotes is, "The best knife you own is the one you have with you"
Fun testing, great results with that cruwear, NOW, get out that new work sharp pro and bring that bad boy back to less than 200 grams on that bess tester TC, haha.
TC has been having a ton of fun with the WorkSharp and the tester 🤣
@@SMKWcom, haha, that's what I figured and mentioned it, great toys.
Ok, TC, have Greg mail that wonderful full knife to me. I will definitely sharpen it and give it a great home!😊👍
GAW huh...sounds like a good idea
NEeeEXT! I laughed every damn time lol
TC still randomly will yell next thru the whole store
Great show as usual
Thanks Joey!
Benchmade always do well! The adamas was similar on the edge tester
Does not do
Thanks for watching!
Like how you use the Scab PATENT testing program, it simple , it works
thanks for watching
Love the Anominous, not sure why they call it a bushcraft knife though. I definitely need one of those helmets for sure.
Thanks for watching James!
NEXT!
SMKW is going to stock light sabers!
Love these videos! That Benchmade is Tough!
Thanks for watching Scott!
Very cool! The Cru-Wear Blade Steel is that sharp. Just think you can shave a frog! Awesome video
Finer than frog hair spit four ways
That's a sharp factory edge! Is that model BM's standard or the newer Select Edge?
Brother your PM3 was 190 where does that sit on the scale . 👊🏼
190 hits on "utility blade" to "High end cutlery"
Why did you clearly score the flooring before hand? You can see its already been scored before you cut it!? I love cruwear, but yea that thing is way to thin of a handle
You are giving us way WAY to much credit if you think we so any extra work to any of this lol
Don't fancy trying this on my para 3 cruwear 😮
We are sure the Para 3 would do well but we would hate to do it
HAS TO KEEP THE “NEXT!” from now on
Please no...he is so loud already
Hello mon ami 🫡 c'est très bien il faut toujours porter ces équipements de protection individuelle😂😂 le casque est phénoménal 🚀 vidéo très intéressante très bon test du couteau cela nous fait une idée sur la qualité et la dureté de l'acier du couteau
Si on doit acheté se couteaux on sera se que l'on n'aura acheter 💯
S'amuser tout en jouant... travailler avec des couteaux rend notre travail intéressant !
Time to strop that P3!🤣
Just saying those would make phenomenal GAW knives!!! Jus sayin….?
We can't GAW the brick we need it for the next...oh you meant the knife...we could do that lol
Would have loved to see how sharp it was before the brick destroyed the edge lol
So you basically have the best job in the world, don’t you?
Yep! And we are grateful to the knife community everyday for letting us do this as work 👍
Sold
It stood up to all the task TC threw at it!
Missed opportunity, quick strop, then test it again!🤔
Thanks for watching Alpine!
Red five standing by.
IYKYK
Send in the clones!
Thats not a bushcraft knife..thats a stealth combat cqb sharp stick..
And we shall refer to all knives as sharp sicks for the rest of the day
Safety first(Never get bloody cut towards your buddy). I learned that in the boy scouts.
Greg yells Scout rules all the time around here
open a can of beans
Adamas fixed and folding next???
Thanks for watching and for the suggestion
But will it keel?
What you use it for is up to you, we just show what it will cut 🤣
A brick🤯😂😂
Where's the 70's shag carpet? 🤔
Left in the back of our highschool van
Why. Why abuse a perfect knife!?!?
Because we get to sharpen it and bring it back as well!
Oh man that brick cutting was a sin
It always makes us cringe a bit but many of the blades take it on no problem!
Nice knife but overpriced for sure.
thanks for watching
Hahahaha overpriced? 😂
Awesome 👌 😂
May the schwartz be with you!
Nah he got the upside, i got the downside. See, there's two sides to every schwartz.
😂