From experience; that chain will buckle the chain on the de-acceleration inside the sprocket casing on the engine and instant lock your back tire. Happened once going 70 km an hr 😳 sheared a tooth instead and kept going had the heavier duty 420 chain
Nice I'm almost finished with mine, added nitrous and a boost bottle. Running the nitrous through the boost bottle, in other words the boost bottle is in-line between the intake and nitrous bottle.
Thanks actually the same my personal bike this is my friends you could see my personal bike videos... It's black and red with a Deadpool sticker.. and about the chain tensioner they don't make them anymore they're not available
Whats the point of keeping the original bike chain with pedals????....it can't be possibly used to jump the engine right? I'm planning on building myself one so im just curious
ay i'm loving that i plan to do a 110cc chopper frame for a 110cc two stroke with some 29 inch black aluminum mag wheels also btw where did you get your exhaust from ?
@@mozezcen-valley7555 ok do you think the bike will be too low for these rims or no? also where should i get a reed valve from? because i have done two and neither of them worked even with the windowed piston any tips to fix that ?
I recommend you get a spring loaded chain tensioner and attach it to the upper part of your rear a-frame so that it applies a constant spring tension puling the top part of the chain up, keeping the whole chain pulled tight. You won't see any more chain wobble on the top part of your drive chain
What you want to do is look at RDM group page on Facebook maybe share a link to this video and say where can I find more info about it they're the ones that sell
@@mozezcen-valley7555 thanks man, water cooled Chinadoll engines have been a big Interest of mine since a few years ago when I thought it might be a good idea. Havnt seen anyone do it but these guys so far.
Looks and sounds beastly
That power band must bring a lotta smiles!!!! Love the expansion chamber on that! Such a nice smooth flow.
What exhaust is that cause i want it for my bike
@@luisrivera-xm1tbI’m not sure what muffles he’s using, but I think the expansion pipe is an mz 65 clone.
That chain bro 💀
Ik
Settle down it’s better loose than too tight
From experience; that chain will buckle the chain on the de-acceleration inside the sprocket casing on the engine and instant lock your back tire. Happened once going 70 km an hr 😳 sheared a tooth instead and kept going had the heavier duty 420 chain
@@Jackp53 theres no suspension so its probably better tight?
True @@tannermartin7263
Nice I'm almost finished with mine, added nitrous and a boost bottle. Running the nitrous through the boost bottle, in other words the boost bottle is in-line between the intake and nitrous bottle.
Fucking amazing, would love to see it tearing thru the neighborhood! Do you have link to chain tensioner ?
Thanks actually the same my personal bike this is my friends you could see my personal bike videos... It's black and red with a Deadpool sticker.. and about the chain tensioner they don't make them anymore they're not available
@@mozezcen-valley7555dude please tell me how you got that engine please
@@Iysrauldid you ever find out?
@@kix-yb4yv sadly nah😔
@@Iysraul dang I was hoping you found out lol
Nice bike but you should add a top chain tensioner to prevent hell
SO CLEAN OMG SMOOTH ASF ENGINE TOO DAMNN
The chain has too much slack in it. The bike is gorgeous. 😊
Your chain tensioner you have to bring it back some
Ok
SWEET looking ride
Masterpiece of 2t perfection, ggz-👽👍🚲💥💨💨💨💨💨💨💨
Sounds good 80s cr80 sound on headphones 🎧 👍
Hahaha 😁
That kitten purs
Engine link please-
Were all still hoping your l going to Races next Month ✌️👽
Whats the point of keeping the original bike chain with pedals????....it can't be possibly used to jump the engine right?
I'm planning on building myself one so im just curious
Gonna need to see more of this bike please… especially expansion chamber! Would love to see those welds…..
Your in Puerto Rico 🇵🇷 🎉🥳🥳🥳🥳🥳🥳😎😎
Stick that guide forward the chains hitting that will last 5 minutes if not?
What in Tarnation is that battery doing there?! Lol. Good looking wasp there
Maybe lights or water pump batter? Who really knows I didn't ask him
@@mozezcen-valley7555 Reminds me a lot of Life of Marcus bike setup.
ua-cam.com/video/3FRGW64RZYI/v-deo.html
Electric starter
Yep I want one but you better tighten your chain
Excuse me, where did you get the Ram and tires of it?And what is that purple thing
Purple thing is the chain tensioner.
Sounds like a monster
sera que essa bike anda muito 😅😅
Sounds sweet!
Real streat soldier machine 💪🏼🏴☠️
Ftw lc and it is like normal motorized bicycle engine but with reed and lc cylinder😂 so weird also cool frame and wheels🎉
Looking for this type of wheel setup for my bike. can you pls share link to rims/tires? would really appreciate it
I am almost certain those are "Gemini wheels" / "Gemini hubs" if you type in Gemini bicycle wheels or Gemini bicycle hubs it will pop up
Where would I fine this engine, looks dope I wanna build something like this for my bike
Aprilia RS50 Minarelli AM6 complete engine?
Où puisse-je me procurer ces moteur Moteur Aprilia RS50 et Minarrlli AM6 ?
Merci
Best motorised bike evr
Great bike!
Chain hanging on for dear life 😭😭
What kind of exhaust is that I like how it goes under the frame
What kind of engine is it and how much displacement or is it a special engine?
Debe ser de mucha ayuda en el camino pendiente
Did you use a 17 inch rim or an 18 inch rim for your bike? Do you think a 19 inch would work possibly?
Is that a drum brake in the back? 🔥
Doesn't look like it's got rear brakes at all
ay i'm loving that i plan to do a 110cc chopper frame for a 110cc two stroke with some 29 inch black aluminum mag
wheels also btw where did you get your exhaust from ?
Get hubs and spoke size upgrade u going have to find a shop where ever u can . Or find someone.. no idea
@@mozezcen-valley7555 ok do you think the bike will be too low for these rims or no? also where should i get a reed valve from? because i have done two and neither of them worked even with the windowed piston any tips to fix that ?
@@mozezcen-valley7555 also i'm not sure if these wheels have spokes or not it doesn't look like it i would have to check on that tho
Put a chain tensioner on the other side of the chain, it will have more torque and it won’t move around
I sure miss my AM6
What happened to your am6
@@2musicSoundtrackfandom579 probably blew or had to sell it
😂😮😮
Almost got me to want to do that again
What kind of tensioner is on that bike???
Two stroke right? Are they legal in PR?
Sick 👍🔥
Salam.allahumma solliala Saidina Muhammad wa'alaalihi Saidina Muhammad.enjin apa ni sun.macam padu ja.
Did you have to swap the head to get the rad on
where did he get the engine from?
If you could tell me like what engine you got for it or the link I would be happy because I’m trying to get one right now
Nice 👌
Hello friends how are you 💗 very Nice
Better tighten that damn chain boy!
Slk sonho uma dessa😍
How did you build that? And where you get the parts from?
qual a marca desse motor eu quero um desse
Tighten that chain bro😂😂😂😂
Ok
Badass build mah ghee
Where can i get that mufler?
is that a e motor !!
kinda need to tighten that chain to much slop
Make a vid on how u made it an links to anything u added plz
I recommend you get a spring loaded chain tensioner and attach it to the upper part of your rear a-frame so that it applies a constant spring tension puling the top part of the chain up, keeping the whole chain pulled tight. You won't see any more chain wobble on the top part of your drive chain
That small head isn't doing that engine Justice
Que motor é esse, tem link???
This is THE shit 🔥🔥
nice clean gass bike but its a shame it would get gapped by a colmen
What case is this?
Chain needs more support
Where u get the bike and back wheel ?
What kind of CDI is it running
off the chain lol
How did u get them beastie wheel to fit with bike frame
They are 26× 2.125 race tires
What is the wheel setup
_cool_
What are your tires?
Where do I look for more info on these builds I live in canada and want to build this stuff. What motor was used, is it a heavily modded chinadoll?
What you want to do is look at RDM group page on Facebook maybe share a link to this video and say where can I find more info about it they're the ones that sell
@@mozezcen-valley7555 thanks man, water cooled Chinadoll engines have been a big Interest of mine since a few years ago when I thought it might be a good idea. Havnt seen anyone do it but these guys so far.
How fast
That chain look a little loose
Ok
Yo quiero conseguir un motor de esos para mí bicicleta 😮😮😮
Oh yeah 😎. Water 💧 Cooled? Where? How? looks like 2x stroke Chinese 80, Air Cooled? 😋 🤔
Suena asi por que tiene mas rpm que un motor original ? O solo es por el flaper valvula ?¿
Its still electric driven?
Hey what do you use for your brakes
I don’t think those chain adjusters can handle that motor😂 I think you should take a couple links off or something
holy pls tighten that chain
Ok
Thighten the chain a bit
what you called on that rims were you can purchase it?😊
What rims and tires are those?
Where ya get the moto rims
I would say take alittle slack out that chain
How much is that motor?
Where can you buy that m6 motor at?
What engine is that?
Is it a minareli?
chain it flopping all over mayne
How do you add the radiator?
Any link for this wheels 🔥🔥🔥🔥🔥💪🏼💯
How come you didn't show the " water cooled" engine 😐 ????????????
Where can you order that motor
Tremendo trabajo felicidades se olle muy bien y algo bonito yo tengo una y soy de Puerto Rico 🇵🇷
It's my friends
@@mozezcen-valley7555 me gustaría ver mas de ella
Where do I get one of those mufflers
who needs rear brakes lol
where you get rear tire?