Good review. Definitely agree with the connector sockets on top of the machine. Some of the wiring looks like it would be an issue for putting this in an enclosure. Really like the cable management; that's a feature I wish I had on my xTool D1 Pro. The cables are just plain clunky the way it is set up. Have looked at some of the drag chain setups, may go with that; it's great that Longer put the cables in the rails. How is belt setup and tensioning?
Thanks Mark. The belt are basically a pull and connect. They are already the right length and have clasps on either end. You just pull and slide into the slot.
Nice video man. I've been zeroing out on this one as my first laser engraver. I figured it's powerful enough and fast. Never you checked on their camera or other accessories?
I watched several other videos and they complain that light burn chose the wrong software and they had to go into light burn and change it to get it to work right. Did you have to also change it or did longer fix the problem before sending you the b1
YOu came out with this video 2 months ago. In using it during the two months, how has it been in terms of reliability. Have jobs stopped in the middle. Have jobs run where the image jumps to another spot on the material? At this point I would take slow as long as it works.
Dear sir! I bought this same machine 2 weeks ago cut three little projects out and the machine went bonkers. on startup the machine don't home anymore the move buttons are backwards. if set it to go t a place on the work space it doesn't move when i hit go to origin. I have three text messages to longer they tell me to try reburning the firmware did that still don't move now there not getting back to me. Its like something happened to the controller.
The move buttons being backwards is a Lightburn settings issue. Can you run these commands in Console. And then test if your jogging controls work correctly? G10 L2 P1 X-845 Y-850 That should put the lower left at 0,0 with positive coordinates going up and to the right from the bottom-left. Can you then power cycle and then retest? Check the following: Check that jogging controls work as expected Check that bottom left is indeed 0,0 or close to. Top-right should be 845,850 or thereabouts Other basic function of the laser
Sorry had to remove my affiliate links. Here is the laser www.longer3d.com/pages/longer-laser-engraver-easter-sales?Google&campaignid=21103686618&adgroupid=&adid=&extension_id=&US_Pmax_Lae_easter_XP_20240318&device=m&device_model=&keyword=&matchtype=&geo=1021278&target=&ad_position=&gad_source=1&gclid=Cj0KCQjw2a6wBhCVARIsABPeH1snrM7D1oAudwoiI2nOuhrEuqbIbymx7yBNKmkuu5M1k8VOYMb3AZ0aAj7fEALw_wcB
You show the template for a second, haphazardly and from such a distance it's hard to read the values, thumbs down for your sloppy approach to the viewer.
Good review. Definitely agree with the connector sockets on top of the machine. Some of the wiring looks like it would be an issue for putting this in an enclosure. Really like the cable management; that's a feature I wish I had on my xTool D1 Pro. The cables are just plain clunky the way it is set up. Have looked at some of the drag chain setups, may go with that; it's great that Longer put the cables in the rails. How is belt setup and tensioning?
Thanks Mark. The belt are basically a pull and connect. They are already the right length and have clasps on either end. You just pull and slide into the slot.
Nice video man. I've been zeroing out on this one as my first laser engraver. I figured it's powerful enough and fast. Never you checked on their camera or other accessories?
I haven't yet, except their rotary. I did not like it. The ATEZR KR Pro is my go to for that.
I watched several other videos and they complain that light burn chose the wrong software and they had to go into light burn and change it to get it to work right. Did you have to also change it or did longer fix the problem before sending you the b1
I didn't have that problem. Maybe they fixed it?
YOu came out with this video 2 months ago. In using it during the two months, how has it been in terms of reliability. Have jobs stopped in the middle. Have jobs run where the image jumps to another spot on the material? At this point I would take slow as long as it works.
Hey Scott, I haven't used this one very often, but when I have I haven't had any issues.
so how does the phone connect without wifi?
Dear sir! I bought this same machine 2 weeks ago cut three little projects out and the machine went bonkers.
on startup the machine don't home anymore the move buttons are backwards. if set it to go t a place on the work space it doesn't move when i hit go to origin.
I have three text messages to longer they tell me to try reburning the firmware did that still don't move now there not getting back to me. Its like something happened to the controller.
The move buttons being backwards is a Lightburn settings issue.
Can you run these commands in Console. And then test if your jogging controls work correctly?
G10 L2 P1 X-845 Y-850
That should put the lower left at 0,0 with positive coordinates going up and to the right from the bottom-left.
Can you then power cycle and then retest?
Check the following:
Check that jogging controls work as expected
Check that bottom left is indeed 0,0 or close to. Top-right should be 845,850 or thereabouts
Other basic function of the laser
Does it have additional legs cor use with the rotary accessory?
I have not seen any but I’m sure someone will build 3D printed one soon.
Thanks for the tutorials ❤
My pleasure 😊
What is best interval you found
Really depends on the dot size of your laser. It should be close to the dot size of your laser.
@@MoonpieCreations I have the b1 that’s why I was asking right now I’m sitting at .09 with decent results just need darker burn so slow it down some
Jason. How does this compare to the Xtool? Definitely cheaper but is the quality and features better?
It has a long way to go to compare to the xTool. Apples and oranges really. Now the ATEZR P20 is my go too LASER even over the xTool. D1 Pro.
Thanks!
No problem!
Link to machine?
Sorry had to remove my affiliate links. Here is the laser www.longer3d.com/pages/longer-laser-engraver-easter-sales?Google&campaignid=21103686618&adgroupid=&adid=&extension_id=&US_Pmax_Lae_easter_XP_20240318&device=m&device_model=&keyword=&matchtype=&geo=1021278&target=&ad_position=&gad_source=1&gclid=Cj0KCQjw2a6wBhCVARIsABPeH1snrM7D1oAudwoiI2nOuhrEuqbIbymx7yBNKmkuu5M1k8VOYMb3AZ0aAj7fEALw_wcB
Pretty neat machine.
I think so too! Not sure it will replace my ATEZR though.
B-1 30 watt lazer...WOW 👏 😮
Fairly good machine and a cheaper alternative to the high cost ones.
@@MoonpieCreations 😊😊😊
Sounds like your a "fan".
Bahahaha
You show the template for a second, haphazardly and from such a distance it's hard to read the values, thumbs down for your sloppy approach to the viewer.
Well, I’m giving you a thumbs down as a viewer. For being sloppy and not asking for the settings you want.