PS3 - Debug for HDD Exchange Utility - Upgrade Or Replace Ur HDD/SDD [Voice Tutorial By Grim Doe]
Вставка
- Опубліковано 16 вер 2024
- External Hard Drive Enclosure - Amazon Link:
www.amazon.com...
GUI FAT32 Link:
ridgecrop.co.uk...
@GrimDoe Link:
/ grimdoe
Thanks from France !!!
Nice tutorial man!!!
Big Thanks mane
More Gaming related videos
are coming soon.
And of course more Music Stuff
on my other Channel.
Just keep a eye out
And also
Thank you for the support 😁🎮❤
Thanks for sharing. Great tutorial.
Thank you Bro 😎
Can you quickly explain how to do this on HEN? would greatly appreciate it bro
Nice one bro🙏
Thank you 😁
now that we copied the hdd to external hdd, can i swap the hdd now?
Right I don’t understand when he swapped the drive
Wait so after cloning the old drive and new drive are still connected. Do you need to swap it out or you need to have both in at all times?
You swap them out.
Hello, after the HDD copying process is completed, is the data in the first HDD to which we copied the data deleted at the end of the process, or does it remain intact so that we can use it as a backup in the future?
It remain intact.
I know this is a old video, but does this method works even with a 1,75tb and 2tb drives?
Max size for ps3 is 1.5Tb, anything above it might not read
will this also transfer over evetbting like your profiles files and the like?
It should
So are you cloning to the external drive and using it to backup onto the new internal drive? Or are you cloning to the internal drive through sata to usb and then installing? Theres some steps missing in your video, you show formatting the internal hdd, you show backing up to a external hdd then you just reboot and it has more memory’s please inform me of the steps in between
When I rebooted the PS3 is when I switch out the Lower storage to the 1TB
That is why I went into the system storage to show the increase of space.
And I was cloning the internal drive onto the external drive so I can switch them out once it gets done.
Trying to go from a 1tb hdd to a 2tb SSD. It runs the clone for about 18 hours then when I switch the drives it goes to rebuilding data on hdd, gets to 70% and gives me an error, then I have to reformat the SSD and start over.
I've done it twice now
PS3 is only capable up to 1TB
What hard drive do you recommend? Also thanks for making this tutorial. Does the save data stay their to?
The data does stay but if you're looking for a hard drive I would stay with Western digital
Yes it does and perhaps the cheapest 1TB SSD drive you can find.
Hello everybody...why my free space don't change after that😢😢???please help me 🎉
Do you need a ps3 controller when you have to connect to usb? Im only able to use my ps4 controller.
Unfortunately yes
That means if i go from a 320gb hdd to a 1tb 2.5 7mm hdd i copy this with the cfw and then build in the 1tb ?
320GB to 1TB
Everything from the 320GB
Gets copy over to the 1TB and you have a lot more Room/ Space
Can this be done with hen enabled?
Yes.,
You have to have HEN Enabled.
I'm on 4.80 CEX but get error when copying over. Any tips?
Down grade your firmware.
Install a one terabyte SSD drive
Swap out the drives
Then go back to the firmware that you were on that was having problems doing this process. "Good Luck"
I read it should only be done if the new drive has the same size of the old drive or otherwise the size of the new one will be limited. Is that true? thanks
Nope Not true.
So if you have 150GB and your Up sizing to 1TB you will get the 1TB size.
I showed it in the Video,
I was up sizing My HDD to a 1TB SSD 🤷🏻
I have changes m'y 350tb HDD with this tutorial and .in my New 1tb HDD i've juste 30tb free....Can you hello me please?
does this work for SSD as well?
Yep, up to 1TB
....my blue screw is stripped
W☹W !!!
That Sucks and if you do get it out Re-Place the Screw.
I got it out then my other screws got stripped, I gave up and just took some cardboard and plugged the HDD in. It just works although a temporary solution. I’d also like to point out that the HDD exchange utility sometimes results in the hard drive capacity remaining the same. I recommend using MultiMAN and copying the files from dev_hdd0 to the root of the hard drive connected via USB
@@muffinposter But will you install the firmware though and from what I remember that MultiMAN method might not work with NOR consoles and HEN?
@@iangabrielalcantara7756 I have a NAND console on CFW
Can debug settings be enabled with HEN??
Did you find out? I want to know as well