Відео

Yessir, happy to help 🤙🏻🤙🏻

Glad I could help, thanks for the comment and I appreciate you being part of the squad. Be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

Good question - they don’t wiggle side to side, however, they’ve got about 1mm of play forward and back. That being said you’ve got to put a little muscle in it for the baseplate to wiggle. Otherwise it stays put - no rattling or movement normally. Thanks for the comment and I appreciate you being part of the squad. Be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

This was on my mind actually, I was thinking it’d probably be helpful to have a side profile of what’s happening. I’ll see what I can do, stay tuned!

Here you go! ua-cam.com/users/shortsCP7fiKnvn6M?si=vJA6718tWKGFywBG

Thank you! 🙏🏻 🤙🏻🤙🏻

🤙🏻🤙🏻🇺🇸🇺🇸

Thank you good sir 🤙🏻🤙🏻

Thanks! 🤙🏻🤙🏻

I’m no match for your muscles lol. My mags were stiff in the beginning but they’ve gotten better after some use. Thanks for the comment and I appreciate you being part of the squad. Be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

@VPTACTICAL np, love the video. I have the retard strength. The last couple rounds were tough, but I've left my mags loaded for a few weeks and it has seemed to help

Hahahahah - better than weak. I’ll have to throw some ammo in mine and let them sit. My EDC already has ammo it in, I appreciate the tip!

It’s a sweet sounding exhaust that’s for sure, I anticipated the drone and picked up two 12” resonators that I had welded in place. I still get a bit of drone but I can only imagine not having a resonator at all. I wasn’t aware that resonator tips were a thing, pretty cool. Thanks for the feedback 🤙🏻🤙🏻.

@@VPTACTICAL $50 at O’Reillys

@Baptistbowhunter Not bad at all! Thanks again I appreciate you.

Thanks man, means a lot. I appreciate your comment and for you being part of the squad. Be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸. Glad I could help!

Nice 👍🏻, let me know how it works out for you. I appreciate the comment and for you being part of the squad. Be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

I believe Palmetto is U.S. only to my knowledge, importing guns over seas is a big task. Heck even just getting guns to the U.S. from brands like HK and others comes with a lot of red tape. Thanks for the comment, I appreciate you being part of the squad. Be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

Hello 👋🏻

Green definitely stands out across most surfaces, unless it’s a really dense green background. There’s certainly pros and cons to both, worst case you pick up one second hand to try it out or maybe a friend who’s got green dot optics. Hope that helps - sounds like a sweet setup btw! Thanks for the comment and I appreciate you being part of the squad. Be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

Not for everybody - I understand, to each their own. Thanks for the comment and I appreciate you being part of the squad. Be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸. P.S. - when UA-cam creators start posting links they typically start blocking the comments section. Not allowing us or you to comment. Not sure if anyone has had a strike against them for it, but wouldn’t be surprised.

Not every barrel is going to fit as your experiencing, the tolerances on the micro are very tight. That being said the barrel I got is from 3CR and the model number is GLK-43-BN-THD. They run about 60 give or take, it was a direct drop in - no modifications needed. I cleaned the barrel, lubed it up, and hit the range. Hope this helps - thanks for the question and I appreciate you being part of the squad. Be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

Absolutely - I appreciate the kind words and hope to see you around the channel. Thanks for the comment, be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

Not how I normally shoot, but oddly enough it felt right at the time lol. I was waiting for someone to say something haha. Guess your the first, winner winner chicken dinner. Thanks for the comment and I appreciate you being part of the squad. Be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

That’s a great point to mention, thanks for the feedback. I appreciate you being part of the squad - be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

Great question - I did not use any optics plate for my pistol red dots. This applies to both the dagger and micro dagger. I’d prefer to get the an optic with the correct cut to begin with. Optic plates are just another component to contend with, plus it may raise your optic so high that you don’t have a cowitness with your iron sights. Hopefully this helps - thanks for the question and I appreciate you being part of the squad. Be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

Might as well, always a pleasant surprise when you remember later. Oh yeah I’ve already got upgrades for this new gun haha.

Thanks for the feedback Scott, I’m glad it worked out well for you. I’ve been extremely pleased with the fit, quality, and price point. CYA does a solid job and I’m glad that I found their products. I appreciate you being part of the squad, be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

@@VPTACTICAL I also meant to say that I've had my CCW since 2001 and have just about every holster known to man! I love my T1C's, my Blackpoint Tactical, my LAS concealment etc... The list goes on & on. I was in the market for a "cheap" holster for my Shield Plus, ordered the CYA Path and loved it. Now I have one for the G19 and it really did amaze me how well it conceals and how minimalist it is. Good review BTW!

@scottorr5758 Thanks for the kind words, I’m expanding my collection of holsters slowly but surely. It really does make a difference having a quality holster. Cheers! 🤙🏻🤙🏻

Great question - everyone has different methods to their process. I’ve heard of some putting them in the clothes washer with other rags, dish soap & water, others use a degreaser, etc. Me personally would prefer to use dish soap & water, then let them dry before reuse. That being said there are different quality mops, some may come apart more easily than others. Generally though handwashing them with dish soap should be the least abrasive method. I hope this helps - thanks for the question and I appreciate you being part of the squad. Be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

Not sure what you mean by that but if you care to explain, then constructive feedback is welcome. 🤙🏻🤙🏻

@@VPTACTICAL well, you titled the video as a review, but you didn’t really review anything. You showed us the product, then asked our opinions..

Hello!! 👋🏻

The names are something else haha, a little more creativity goes along way. No issues with the Bear?

@@VPTACTICAL Nope. It’s held on well. I used longer plate mounting screws though. Just wanted a better bite for such a chonky optic. It’s on an AIM Surplus slide.

I totally get it, I’ve been eyeing some of the aim surplus stuff. Those slides look legit, along with grit grips. I’m digging the ported slide/barrel combos, they seem to be the rage.

@@VPTACTICAL an AIM PVD slide on a GG19 frame would be pretty sick!

I’d like something for the micros, compact/full size would be cool too! I really enjoy the micro platform, if I could make it shoot flatter and have faster follow up shots I’m game. I just need to explore more of the different offerings.

Thanks for the tip and info, I’m just starting to explore their line up. I’ve got some holosun optics with that circle, makes a big difference with acquisition. I started doing some draw reps with this optic and think I’ve found the sweet spot. I’m sure once you get the mechanics learned it’ll become natural. I appreciate the comment and for you being part of the squad. Be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

@@rambb1011 Thanks! Much appreciated 🤙🏻🤙🏻

Thank you sir, more to come. I’ll do a detailed review here soon. Stay tuned 🤙🏻🤙🏻🇺🇸🇺🇸

@@rambb1011 Thank you for the support! 🤙🏻🤙🏻🇺🇸🇺🇸

Hello Eugene, Life is grand and I appreciate you asking. I hope things are doing well for you too. Thanks for the kind words and I’ll see you around the channel. Be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

For a stock ruger AR it should have a carbine buffer, which is pretty common. Armaspec makes a carbine model and that should just swap over no problem. The reason some folks run a heavier weight is usually to reduce some recoil in larger calibers or because they’re running a suppressor. If you’re going to run anything other than the factory comparable weight then you would want to consider an adjustable gas block. Point being if your not going to run suppressed now or ever than the carbine equivalent by Aramspec should work just fine. If you want to double check you could always send Aramaspec an email to confirm. Hope this helps - thanks for the comment and I hope to see you around the channel. Be safe and stay vigilant 🤙🏻🤙🏻🇺🇸🇺🇸.

@@VPTACTICAL absolutely it helps! Thank you for the info.

@allisonsmith9050 Happy to help, best of luck!

Yessir! That X5 is one sweet gun, I should bring that back and do an updated video on it.

@@Rocket-ui2vv 😂😂😂😂😂, thanks !

That’s what I meant, brain wasn’t processing that day apparently lol.

A inexpensive option and nice little upgrade 🤙🏻🤙🏻, I appreciate the kind words. Thank you!

@VPTACTICAL definitely going to consider getting one. If not for your video on it, I had no idea, thanks VP Tactical!

@rambb1011 Glad I could help!

A relatively low cost item to help protect higher end gear, I agree. 🤙🏻🤙🏻

Thanks man! 🤙🏻🤙🏻

Thanks man, I think so too! 🤙🏻🤙🏻