Відео

I've seen the fan motors for replacements

Great Video. Thank you for sharing.

Came for jeep project. 👍like to have one when budget allows.

Question I have is I have fuel coming out the nipple next to return nipple. Where does the hose from there go or is there supposed to be fuel coming from there? Thank you for the video it’s helped a lot. I now need to replace the main fuel line and filter annnnd primer bulb

Your links dont work

Good video, for me the welded nuts on the back side broke😂

I’m going crazy. I’ve tried this too and the easy out is stripping thru too. I think I’m going to have to use my drummel and cut a line for a flat head. 😵‍💫🤬

Awesome sauce! Thanks. I just stripped one really good and starting to on the other side. Someone else was advising to use a propane tank but I’m concerned about the paint. This I’m going to try right now. I was trying my extractor bits like yours but the technique was slightly different. 👍

Thank you!

thanks chad great video..

Repeats and repeats the same thing . Never shows how to

LOVE that scroll wheel shortcut. All these years using inkscape for vector graphics, and I somehow never caught that tip! 😂

Do you still sell this? Website says not set up to take payment

Thank you

Good tips. I had some that were badly ate up. They ruined my lisle made in USA torx bit. I went to auto zone and it was made in Taiwan. It survived the worst ones and did the job with no damage to the tool. Surprised me. I'm always USA.

Just weld a nut to the head of the bolt.

Thanks for the review! ive been on the old candcnc ethercut 11 system. now going to upgrade to the command cnc program.

Any insight here? Replaced my fuel line, but there is an open nipple to the right. I believe that is from where my leak is located. Thanks.

Don't break da knees...oye...

Thanks for the tips and tricks itll help a ton im sure. You seem like a wise man with experience.

My saw annoyingly has the nipple for the primer/purge bulb but is not equipped with a primer or purge bulb. I stuffed a poulan duckbill check valve on that spot and called it a day, even though I should probably just put a length of fuel line on it perhaps.

Exactly what my problem was. Easy fix... back to cutting!!

Thank you sir you saved my day

My problem when cutting aluminum is trying to grind off the dross. aluminum just plugs up my grinding wheels an flap discs.

thanks for the most useless video i have ever seen,nothing but blah,blah,blah,with no actual fix shown......clown show video

never really thought of the leverage thing, next time i use an easy out imma grab a tap handle...same principle as taps and ive used em a thousand times can't believe i didnt think of it till i watched you, thanks man preciate it.

How about a laser rust remover would that work as good as the others. I don't have one to try anyway.

Haha didn’t fix anything just said it’s easy

Thank you Chad

Thank you for the help!

how do i save my drawing in inkscape in a gcode for plasma cutting?

Part 2 not as good as Part 1. Thank you so much.

I just came across one of these saws that leaked on it’s side. After cleaning it of sawdust and oil, O opened it up and the return line was through the saw housing and stopped. I’ve been looking a diagrams trying to find where it connects to the tank and your video popped up. Thanks. It was driving me nuts

Can you give a break down on the wiring for a din radio on that truck?

Hi! I saw your other video on how to use script fonts for cnc on Inkscape couldn't comment there . So I might have a silly question, but I'm wanting to know if we can control the font width & height in Inkscape for script fonts/monoline fonts . For example 8mm width(thickness) & 100mm height for each letter in the word. 😊 thanks . I'm talking about the brush stroke thickness not the individual letters themselves . Hope u got my question 😅😅

Watched a couple of your videos and it has been very helpful. I'm only a week in on the completion of my table using Inkscape. Sheetcam and CancCNC so I have a long way to go. Now I am trying to sort through details of torch height set up. Even though its been awhile since you posted videos I have used to help myself, thank you!

Thanks for the tutorial. I plan on installing a new sony head unit

Im going to check my saw right now, mine leaks the same way, i wonder if its the same problem.

Chad, I have a 4x4 table (mostly assembled), torch, computer and controller that came from C and CNC. It was purchased by a friend and never finished putting it together. I am looking for someone with experience to help me complete and get this thing cutting. I am in Southern PA but willing to load it all up and drive it to someone that could help. I am willing to pay for the time of someone qualified to get it running of course. Do you have anyone you can recommend? As soon as my registration is approved, I hope to ask the same on their forum but wondering if you may know?

How do you remove the air filter on top ? Cannot get to the lines without removing it .

I have Candcnc system too and they answer the phone and get you running.Bullet proof system.I have been running it for years.

Mine is leaking from that hole between the 2 hoses. Your screwdriver is right on top of it at 0:39 in the video. I replaced the return line, and now my saw leaks gas from that hole when I press the primer. Any ideas on that? Is there supposed to be plug covering it up?

Thanks for the tip. I thought it was the tank vent but I checked this and found the leak.

Some people just like to complain and some people spent $3000 and got terrible customer service from the folks at candcnc. If you do have issues and you complain they lock you out of their forum. It sounds like you had problems right from the start. That was their fault. Having to send something that is brand new back, is a red flag.

Thanks. Big help. Appreciate it.

why dont you show how to fix it quit saying its an easy fix and show us thats what the video is for right??

I have the same movement when i press green button to turn the motors on. What is the cure. I am just getting started and super green. I cant even get this thing to recognize the z probe and switch.

Thanks for this. I am actually taking notes and documenting the steps. One question. I see your hyperthem is set to max on the machine. Is this correct for all hypertherms as command cnc takes over.

Where did you get your gantry parts and z axis? Thanks

*Friend loves it and it works great>>>**ur2.pl/722** It is def. a workhorse. Not for the ladies. It is heavy.*