- 17
- 39 872
Toms Channel
United States
Приєднався 28 вер 2020
I am passionate about Camping, Motorbiking and all kinds of Restorations and Reparations in my Workshop. Also i like share my opinion about stuff i buy, honest and not paid for. Have fun and Thanks for your Time.
For Sale! - The nicest Super Ten i've seen - Engine Swap 750 to 850
Hello there, long time no see.
What we have here is a Super Tenere 750 with a 850 Motor in a very very very nice condition.
This bike is for sale. If you are interested to buy it, please contact me.
What we have here is a Super Tenere 750 with a 850 Motor in a very very very nice condition.
This bike is for sale. If you are interested to buy it, please contact me.
Переглядів: 591
Відео
Rebuilding the Front Wheel of the Yamaha XTZ 750 - Restoration Project - Part 10
Переглядів 2,6 тис.Рік тому
Here we are with Part 10 of the rebuild on my Yamaha XTZ 750 restoration Project. We put new bearings in the front wheel hub and put the whole wheel back together. If you missed any Episodes... here is the Playlist from the beginning.: ua-cam.com/video/rB-Mfsc7PP8/v-deo.html
Yamaha Tenere Front Wheel Restoration - Cutting the Spokes, Creating a Paintbooth, Painting
Переглядів 1,1 тис.Рік тому
In this Episode, - We Create a "Quick and Dirty" Paintbooth and Check if it Works - Cut the Spokes from the Frontwheel - Chiselout the Front Fork Stearing Bearing - Look at the Tools i choose for Painting - Finally do some painting Playlist: 0:00 Intro 0:25 Checking out The Rust on the Frontwheel Rim 0:30 Cutting Spokes 1:28 Removing the Front Stearing Bearing 2:49 Prepairing for the first PreC...
Removing the Ignition lock - Not as easy as i thought - Part 8 of the Restoration
Переглядів 872Рік тому
Today, we remove the Ignition Lock from the Fork Holder. It was mounted with screws that are dull from the Factory, so that you can not easily remove that Ignition Lock. But we managed! Have a good one on me.
So Much Damage! Bend Brakediscs & Dangerous Rusted Rims - Part 7 Motorcycle Restoration
Переглядів 701Рік тому
Today, we have a very sad Part of this Motorcycle Restoration Series. BOTH! Brakediscs are bend and we will see how. Unfortunately the Rim is also dangerously hidden rusted to total unuseability. There is nothing more to say other than, it hurts! Please check your 90s Bike if you have so much hidden damage with your Rims. Drive SAFE!
Using an USB Endoskop on a Fuel Tank - Restoration of a Yamaha XTZ 750 - Part 6
Переглядів 8422 роки тому
You got a missing Fuel Tap Filter ? Thats how you get them Back! Mostly they are inside your Tank and if you ever drain the tank, you can here them rattling away. That happend to me. I wanted to put the tank away again and something rattlet. But because of the shape of the tank, you could never get it out. With that said, i bought an Endoskope with filming abilities and tried to get that sucker...
REBUILDING THE FUEL TAPS - better than factory - Part 5
Переглядів 1,2 тис.2 роки тому
In this Part we Rebuild, Reshine, Repair the Damage on the Fuel Taps. Not sure what happend but we will see that the gaskets are pretty much damaged. We also make the taps shiny again, polishing them, looking almost like they left the Factory. I also create my own gaskets for the Screws on the Tank. BETTER THAN FACTORY! I hope you enjoy and if you feel like subscribing, commenting or even givin...
Spinning Broken Bolt Repair - Part 4 - Rebuilding the Yamaha Super Tenere 750
Переглядів 1,8 тис.2 роки тому
Hello and Welcome to another Part of this lovely Yamaha Super Tenere 750 rebuild. In this Episode we take off the Airfilterbox and discover a broken off Bolt which we need to remove with much headache attached to it. To finally get take off the Brake Lever with it's attached switch. I hope you enjoy and if you feel like it, you are welcome to leave a comment, a like/dislike or a subscription. M...
BOTH FUEL TAPS LEAKING - PART 3 - Restoring the Super Tenere 750
Переглядів 3,4 тис.2 роки тому
In this Part we first take the Front Fork apart and have some ASMR wrenching. Later we come to the Fuel Tank, i actually only wanted to disconnect the Fuel Hoses, but that was a "no go" as both fuel taps where leaking and brought a lot of trouble with it. Best phrase here "How do you deal with that" ;-) I hope you have fun. If you feel like Commenting or leaving a like, it will help a ton. Subs...
Best Smartphone Holder for your Motorcycle ? - a Review of my favorite ones
Переглядів 1252 роки тому
Looking for a Smartphone-Holder for your Motorbike ? Here i present you my Favorite ones. I tested these types for 2 Years now and discuss where to buy it cheap! I hope you enjoy. If you feel like commenting or subscribing, that would help! Greetings Tom
More wrenching - More Problems - Super Tenere Restoration Part 2
Переглядів 4,8 тис.2 роки тому
This is Part 2 of the Yamaha Super Tenere - XTZ 750 - 3LD - Restoration - Rejuvination - Modernizing. In this Part we wrench a lot again. We get rid of the Grip Heating, find out why it is probably not working. The Cockpitholder gets finally removed. Clean the Headlights from gunk of the last 25 Years. Find out that the Speedometer plastics are broken and much more. Also you will see a way to p...
Restoration of a Yamaha Super Tenere 750 - Starting the Process - Part 1
Переглядів 13 тис.2 роки тому
Hi There, my Name is Tom and in this Video Series we start the Process of restorating the mighty Dakar Legend - The Super Tenere 750 from 1995. We start out with an overwiev and what we see what is broken or aged and what needs to be replaced. The Cockpit Holder Frame is unfortunately bend, so we have some wrenching todo. Let me know what you think in the comments below. 0:00 Explain what i alr...
3D Printed 18650 Battery Holder -with Nickel Weld Wire - DIY
Переглядів 2,4 тис.3 роки тому
Here you see my interpretation of a 3D Printed Battery Holder for a 18650 Cell. This one can actually deliver the Amp's you need for some builds. I have not found anything on thingiverse, so here you see what i came up with. Thingiverse Link: www.thingiverse.com/thing:5147417 Make sure to give this Video a Like or Subscribe to my Channel if you are able to. Check out my other Videos for more 18...
Li-Ion Battery Pack Build with BMS from Scrap- 18650 3S/21AH - Samsung 35E Batteries
Переглядів 3563 роки тому
Here is my attempt to build a working 3S 21AH Batterypack to Power an Extra Lamp for my Motorbike. This Battery is made up from 18650 Samsung 35E Cells, welded together with Nickel Strips. I do this as a hobby and do not get paid for these Videos. Any Products shown i bought myself. If i could help you somehow, please consider a Thumbs UP or a Subscription. In any Case i do like a Comment, Good...
Will this 41 Year New / Old Benzin Stove Work or Explode ? Camping Benzine Stove from Barthel DDR
Переглядів 1,8 тис.3 роки тому
Will this 41 Year New / Old Benzin Stove Work or Explode ? Camping Benzine Stove from Barthel DDR
Barthel Juwel 34 - Vintage Camping Benzin Stove / Cooker - no Restauration needed
Переглядів 4,4 тис.3 роки тому
Barthel Juwel 34 - Vintage Camping Benzin Stove / Cooker - no Restauration needed
У меня такое чувство будто вы первый раз это делаете и сразу на камеру или я ошибаюсь и вы это делаете специально и уже не один раз
11?
ha ha ha no price ha ha ha
Where is it located?
Germany - NRW
@@toms-channel price?
Awesome build! If not for my current bike I would buy this one in a heartbeat. Keep up the great work!
the strip in the middle of the cells is unsafe it can go through to the top of the cell and cause in internal short its better to overlap the strip on to of each other right above the cell caps
How did you get on with the build mate. I have just gotten a xtz750
Hey Tom! Schön zu sehen, dass Du dir die mühe machst die XTZ wieder flott zu machen. Ich starte nach langer Vorbereitung gerade meine Restauration und bin immer auf der Suche nach Input! In sofern vielen lieben Dank für alle Aufnahmen! Speziell diese, wo du das Zündschloss demontierst hilft mir, weil ich es entfernen will. DANKE! Warum hast Du keinen weiteren Videos mehr gepostet?
2.9v is a common cut-off voltage for LiPo/Li-Ion as it's gentler on the chemistry. 2.5v is a deeper discharge you can do but it may affect lifespan of the cell(s) and current delivery at those low levels is usually limited.
HI, just started following you. I really like your content as I just also bought my xtz having sold my xt600. maybe we can be exchanging notes as well. I've done a small video on my Xtz repainting and currently compiling videos as well. my channel is mostly about fitness so you can check it out. Good job.
Nice !
Yo dude have you got any more video yet i have just sat and watched all your built videos and interested to see the rest of the build
Hey man great work I have to say . I have taken a lot of inspiration from other 18650 3d printed holder and made my own remix of it , IT worked but was not great . CAD Modeling of a 3D Printed 18650 Holder ua-cam.com/video/rltr2wJtlME/v-deo.html Launguage is in Hindi but u can see the CAD though porcress . YOU have given me new though procress THANK you . I will pin you once I have built it . AGAIN THANKS
Hi Tom, ich habe bei meiner Nabe, bevor ich sie erneurt habe (gepulvert) die Lager raus gemacht. Mit einem Heißluftfön 500°C die Nabe am Lager erhitzt und dann mit einem scharfkantigem hartem Rundstahl raus geschlagen. Ging ganz easy hat vielleicht 10 Min gedauert.
you should not push bearings in on the inner race, use large socket in the outer race.
One of my mates just got a 1989 750, so he is having to do a lot like you. In english it a lower and upper yoke for the forks
Use left handed drill bits as you run brill backwards and when it grips the tread it will spin the thread out.
Stop using ratchets to loosen bolts, get longer breaker bad to do it. When doing things that need front or rear off ground, undo all the tight bolts while bike is on its wheels and more stable.
Hi, hope you’re well. I loved the work so far and great videos. Just wondered if there would be any more? I’ve always fancied one of these and I’ve learnt loads from your stuff.
Hi Gerry, there will be more Videos, but there is a big Butt in the middle. I do this in me freetime, of which i have had not so much lately. Reasons are, i moved from my "home" Garage, to a rented Garage in February, which took some time, you know like it is. Then we moved with all our stuff in May into a new home. In the destination house there is and was a lot todo. We managed todo a lot, but then, i can only do so much in my freetime and most of the time i spent with renovating or keeping up with my bikes i already have. My buddies call me a "freak" because i am so tedious with my bikes. I like to have them clean and very well maintained, that i do not make a video about that. Having said that, if anyone wants me to put the camera on my maintenance stuff, i will do. So the SuperTen Project got very neglected for obvious reasons. I have at least another 4 or 5 videos from all the things i have done, but did not find the time to get the material edited. I am not planning to be so "silent" here but when the wife says, kitchen goes first. I do the kitchen ;-) Then we have to also count on the holidays with the family and so on. Stay tuned, there will be new videos as soon as possible! And for all of that, thank you very much for caring!
@@toms-channel oh wow, it’s great to hear that you’re ok. Sometimes life just gets in the way eh? I have a ZXR 750 that I’m trying to “refresh”, wouldn’t call it a restoration as it’s being done on a tight budget and when life (and wife 😂) isn’t getting in the way, so have enjoyed some of your tips. Especially the part about painting as that’s something I’m keen to do myself but haven’t got the kit yet. Good luck with the house stuff and looking forward to the next instalment when you get time. I’ve subscribed now so should get notifications when it happens 👍
I also have one in excellent condition. Where do you find parts for the bike? Seems like Kedo only has a few parts.
Nicht schlecht die Dokumentation. Wo bekomme ich die Gummiwinkel für die Blinker am Ende des Videos her?
Warum in englischer Sprache? 🤷♂️
My 750 tenere vibrates so my hands get numb. Anyone who has a solution for that? But it drives great without any other problems.
That is a common "issue", the more your carburetors are out of sync, the more it vibrates after 4500 RPM. It vibrates for me too but in an OK range. More on that on an upcoming Video. Greetings and thanks for your comment.
Herzlichen Dank für das "Mitnehmen" auf dein Restaurationsabenteuer. Meine Tenere braucht auch dringend etwas Zuwendung und da ich kein großer Schrauber bin, hilft mir der Einblick sehr. Es wird ganz sicher keine Restauration, aber ich will wohl versuchen, technisch wieder auf den Stand zu bringen. Momentan läuft sie auch nicht gut, dass war der Anstoß, mal etwas tiefer in den Materie vorzudringen. Liebe Grüße
Hey there! I I'm trying to find a new front rim and spokes for my tenere but can't find anywhere...the used ones i find don't have a good rim condition ...i found a shop that sells front rim and spokes but for the tenere 700 ...rim size is the same as the tenere 750 (21x1.85).do you know if this rim could fit the old tenere 750?
Hi There, D.I.D. Rims are no longer available. If they are, it is new old stock. You can get really new ones from Excel and so on. I got new Spokes from a shop here in germany. My Rims in the Video are original Rims but painted already from the guy i baught them. Sorry, that i can not give more as an answer, but ask a local dealer for let's say KTM, they may can help you locate the right dealer.
I have so enjoyed watching your video. Its nice to just watch you work on this old school but great bike. My son and I rebuilt a Super Tenere '89 model during COVID and it was a wonderful project. We found that servicing and in particular balancing the carbs was difficult, but worth persevering to get them 100%. And we also had the same problem with taps leaking, we only found out the next morning until half a tank of fuel had leaked out on the garage floor! Happy rebuilding and keep the videos coming. All the best and thank you.
Definitely not laughing about your paint booth, I did a similar thing when I was 17 and painted my moped! :) works better than painting in the open air but not as good as a proper paint booth. A happy medium! :)
I’m thinking about getting either one of these or a Honda XRV 750 Africa Twin, can’t really decide.
Sometimes when you pull something like this apart, you wonder “how the hell did they manage to put this thing together”
Nice！
Great to watch someone who is learning about things as they go, big respect to you. One thing about your paint gun, the air cap at the front, there are 2 parts sticking out at the sides, they should be horizontal, that way you will get a good spray pattern. Keep up the good work and the videos coming. 😎👍.
Faltó lo más importante, ver como enciende y como funciona.
Think you fussy, it's a old bike. My 2022 tenere is in worse condition than that 😂
Hai mai avuto problemi di carburazione grazie
Der Tank sieht ziemlich gut von Innen aus. Wirst du den Tank trotzdem vielleicht entrosten und neu versiegeln?
Those screws are not Phillips screws. They are JIS, and if you use a Phillips screwdriver on them, the likelyhood of ruining them is pretty big. Get or use a JIS screwdriver. They at glance look alike, but they are not. Learned it the hard way, so trust me.
I finished my rebuild of my XTZ 750 two weeks ago and I bought new spokes for rear wheel before actually checking the hub and rim. They where too far gone to use anymore, bearings where loose on the hub and rim was corroded badly. So now my XTZ has a TDM 850 3VD real wheel, that fits exactly. Maybe if someday I find a XTZ rear hub that is in good condition, I might put it back. Replacement rims and spokes are easy to get, hubs no one makes :(
Nice,That you finished it! I have still a long way to go. The rear is as bad as the front. So i got to adress that in the next Episodes. Have fun with your Bike
which webshop are you going to use to order the fairings? Do you also know a good website where I can find the color codes of original colors used by yamaha?
Hi Mike, the fairings are not produced anymore. Everything which you can buy new is a recreation and not from yamaha. There is an Excel Sheet which you can search for and find the correct color codes. Better search for "rh lacke" which is a Germany based company which produces the paint. They have a Webshop where you can put your bike in and find the colors. I hope that helps. Greetings
I have the same issue on my tank :) one of the reserve filters is inside my tank. I havent bothered to take it out as its a hard job. I have extra fuel filters on my fuel lines before the fuel pump, so its not super critical currently. Might take it out next winter :)
👍 wonderful camera angle and close shot
Hast Du den Filter in Benzintank gesucht??
Wenn es im Benzintank rappelt, muss da was drin sein ;-)
Ich bin ehrlich, was anderes von einem Motorrad der so lange stand und sechs Vorbesitzer hatte wäre unrealistisch. Einiges kommt auf dich zu, melde dich bei dem deutschen Ténéré Forum an, dort wird dir geholfen. LG
Love the XTZ750. Very useful videos for people who decide to buy them now. Keep up the good work!
good keep make all new till end of winrer time...
Ich möchte ja fast sagen "Vielen Dank"! 🙂 Ich habe auch 2 XTZ 750, eine leider inzwischen "in Teilen", die ich mir mit 35-45.000 Km in den 90ern gekauft habe und eine mit rund 80.000 von vor ein paar Jahren, die nun wieder fit- und Tüv-fertig gemacht werden muss... Früher habe ich noch mit meinem Vater geschraubt, das ist inzwischen leider nicht mehr möglich. Insofern ist Dein Video eine gute Motivation!
These thi gs never light on the first burn. Usually have to do it like 3 or 4 tines till tbe whole thing is hot enough.
It always burn on the first start but you have to know how to do it, this guy on that clip know nothing about this stove so this is the efect...
So happy to find this channel, I'm currently doing a restoration of my 3LD Tenere with many parts in a similar condition. For now I just want mine safe to ride on the road this year & so far I've refurbished brake calipers & master cylinders but next is: New rims from SMPro, new brake discs & wheel bearings new chain & sprockets new fork internals carbs cleaned & fuel taps repaired a full service with valve clearances checked. Next winter will be a big strip down to re-coat the frame & engine casings plus maybe a new wiring loom and then re-spray the bike in Sonauto colours. Anyway, thanks for filming your restoration, it's a great project. Also big thanks for doing it in English- I'm afraid my German is limited to ordering a beer!
So you'll beware of dying of thirst... 🍺👍😅
were can buy new???need to be the same nuber 1,85,21 ??
rim looks ok not damage///brake pads can chek if is more damage from one side??
Hi Panagos, trust me, the Rim is broken, there is not much metall left where it rusted away. Also there is a crack directly next to it. When you go offroad with that, you risk breaking it completely. Imagine hitting a sharp stone directly on that Part.
NIkada ne skidati kocione celjusti prije nego sto se popuste svi srafofi, jednostavnije i lakse je dok su fiksirana da se srafovi popuste. Jos jedan savjet, prilikom ozracivanja kocnica posle servisa klipovi moraju biti uvuceni u pocetni polozaj inace se nece adekvatno ozraciti. Pozdrav