- 4
- 81 323
Jesse Racend
Приєднався 30 гру 2013
Audi A4 2.0t B8 Belt Tensioner replacement
Easy 10 min or less. Bolt 40nm or 29.5 ftlbs torque specs
Переглядів: 15 322
Відео
UPC 19 MMA Jesse vs Christian
Переглядів 41310 років тому
Fighting purple shorts Jesse and spandex christian. Sorry for the bad quality. Walk out song love Sosa by chief keef for J
hard tiime getting the connector off so I put a little penetrating oil on it hopefully that helps
what was you car doing before you fix that sensor?
On my B7 the damn clip will not release for nothing my boy!
Tried the orange a few years ago. the dealer, after giving him the vin on my 07, says it's the black one 06E906051K
Jesse where’s the location of the fuel pressure regulator? If you don’t mind doing a vid on that.
On the HPFP its the circle part usually I would replace whole part(300-600$) or go to pick a part
@@jesseracend6950 it’s way cheaper then that good looking out fam
Would i have to depressurise the fuel system first before replacing
Yes. i dint and the gas went everywhere or just do it slow and let the pressure out .
How do you depressurise it?
@@coldn1pples138 see 2;07 in vid
How did you move the clip off the sensor? I am having hard time getting it off
I used a flat screwdriver to kinda pry the clip up, not to the point you break it off tho
@@iconicweeb8843 I broke my clip AM I FUCKED??
07 and up you use an oranbge one. 07 and down you use a black one. By your logic if you have an 07 either one will work. Doofus ...
anyone happen to know the VIN split in 2007 model year for black or orange sensor? i ordered a black one from ECS but there was no VIN split message or indicator iirc.
What code was it throwing?
Did you had an fault code ?
I just searched up the sensor for a 08 and it was black do u think I should still install even tho it says it’s for my model?
You need to tell people what size deep socket you are using. I took mine off with a 24 mm and was unable to put it back using it ,
What year is your car because I’ve been looking hard for the sensor and I cannot see it where yours is. My car is the 2007 2.0t Quattro model?
did u found it?
I just replaced the feuel filter fuel pumps and the sensor and i just got another p2293 what might be the problem??
What is ended up being the problem? A fuse? Injectors?
Just did a Engine light check. Code P0089 pulled up, is this what causes my gas to leak somewhere and smells my car up with gas?
@josephmercado42 did this fix your issue?
What millimetre is that socket please
for the orange sensor 27mm. use deep thin wall.
Great video. Oh and you were right about that F’n connector. Especially when the tab breaks off. 😩. If you are seeing this take your time on that folks and you’ll be fine. 👍
Was your car running before doing this?!
I had a hard time finding the right socket. I finally found tub 🛀 faucet sockets that are very thin and it fit perfect. Easy repair.
What size
@@k.genuine222 they come only in a set. Not sure what size, was a while ago
Same here not enough space to fit through
Use a 1/16 deep socket and you’ll thank me later! It’s a perfect fit!
@@Peedi-different doesn't work
The weird thing is in my tfsi engine OEM was black and I replaced it thinking it would be that sensor and the new one was orange. Now I’m getting a code saying it’s not reading right
Where is the actual Fuel Pressure Regulator at???
its located on top of the high pressure fuel pump
@@zane9245 can you replace it????
What if you use the orange one for 07 and down
I have a p119 code and saying fuel pressure sensor malfunction would this sensor be it car run and drives just a slight misfire
Hey man,i checked mine thats on the car,seems to be stock sensor,and its black. My car is 2007 2.0 TFSI quattro,and im confused since u said 07 and up,orange one,and then 07 and down,black one,and having 07 model,gets me confused haha :D Should i just get the black one since stock one is black? Thanks!
P.S. Car just had new HPFP fitted,and since then car runs better,but after some time on acceleration,it just wont go past 4000 rpm,like a fuel cutout,so can it be the sensor? Dont think its the one on HPFP,since its brand new package,and cam follower is new aswell. No check engine lights either.
@@TheDraganche Orange sensor 06J906051D 2007-2009 (cabriolet, a4) Black sensor 06J906051C 2005-2006 (High pressure fuel sensor)
@@jesseracend6950 Ty for the reply mate,my car is 2007 and its stock sensor is black,thats what confused me. So i need the orange one then.
So it has 3 fuel pressure 3 fuel pressure sensor? The one on the hpfp on top The one that’s grey and comes out the side of the hpfp And the black or orange one in between the manifold ?
Did you figure it out I have the same question
somebody fxcking answer this
The one on top of the hpfp is a regulator, the grey one on the hpfp is the LOW pressure sensor and the black/orange one on the rail is the high pressure sensor.
Orange sensor 06J906051D 2007-2009 (cabriolet, a4) Black sensor 06J906051C 2005-2006 (High pressure fuel sensor)
Thank you
What exactly is that part called? Would you happen to have the part number?
High pressure fuel sensor black one is - 06J906051C. Orange sensor 2007 up -06J906051D
What codes did you pull?
P089 but I have vcds so I can tell what really is the problem.
Hi what was your issue with the car at first? My Audi A5 is idle rough and it’s not the injectors, I’m thinking it may be this sensor, thanks
No boost limp mode . Check spark plugs and coils
@@jesseracend6950yeah i have that rn and it’s not the ecm relay
while WOT did your shit just cut off? I have p2293 and that's my only symptom.
No just limp mode no boost. You might have a lose wastegate on the turbo 👍
What do u mean by cut off . Limp mode right? No boost? Did u change this sensor ? Or did u find a solution? I’m having the same 2293 code and I’ve checked everything. Only thing I’ve noticed it’s that my car has a orange sensor and it’s an 06 I’m thinking this must be it .
I got a code p0089 does this have anything to do with the sensor
have you fixed your problem?
HPFP ...cam follower...089. Lean code..no one knows what 089 is ...until cam follower breaks... then it is too late. Replace it ASAP it is quite easy
Yes same code over and over . Bought new turbo wasn’t it replaced fuel injectors wasn’t it then the fuel filter still no plus did the fuel pump (trunk area) still no boost plus check engine light. Finally did the sensor haven’t had a problem since. I recommend go all Audi Oem parts all these other brands don’t last or get it wrong.
@@jesseracend6950 What is the OEM number for his sensor?
@@mihailkovachev8981 does anyone know the oem number?
did having that wrong one give u particular issues running?
Mark Kharouta yeah lost boost at 3k rpms check engine light on. All good now after I switch sensor
The correct socket size is 1 1/16" NOT WHAT THE VIDEO SHOWS!!
Love Sosa by chief keef
What was Jesse's walk out song?
Who won ? :o