Відео

Mine just sounded like it dropped during a print, got up to check and it's flashing red, I'll see if that works after the print is done.

where to download the screws ?

Dayum! I wasn´t even searching this video but I´m glad I saw it and watched it, I truly learned good stuff, like the pause to change filament (which I use A LOT). But now that I´m here I would like to ask (the main reazon I clicked on your video): All my prints start and end with a default temp of 230°C; I can´t find the setting to modify that other than change the temp manually on the printer or the software

Thanks for sharing

Better printer... Or just More complex???

I have very old genius USB webcams, would they work? Lol

my poassword dosnt work

Grreat content, im learning Creality Print 5 through you, thanks. Which enclosure do you use that fits the ender 3 Ke? Im looking for one, but most i find online and read up on aren't for the KE, and the spool doesn't fit. But yours fit nicely it seems! Cheers

THANK YOU FOR FIXING MY NEW ENDER 5 PLUS IT WAS BENT PIN

why is this asking for a user name and password

Do you leave the fan at 100 for PID of extruder or turn it off after the heater bed?

Thank for making this video man..this is awesome. just 1 question is there a way to see the webcam feed remotely? i mean if I am not connected to the same network as printer? if there is a way then it would be much helpful to monitor the printer from comfort zone (my home)

Hi, can you share which filament spool adapter you used? I looked in thingiverse and there are so many, but I haven't found the one you used

are airsofts still banned in Australia?

Hi! Same issue. Any issues with removing filament? As it can't heat I'm worried I'll not be able to remove the filament from the extruder/heatbreak etc Thanks

Worked on the first try, you're a genius, thank you

segui todos los pasos correctamente y no me detecta la web cam, es una Webcam Xiaomi W88s 1080p, puede ser que no sea compatible?

That didn’t fix it

thank u for the tutorial's, mine works perfectly fine after doing that

I was literally looking for this the other day. Other question I have is the infill. My shell is only one layer thick. That’s fine by me, but I’m trying to make a cosplay helmet and want the inside to be thicker and either have more walls or more infill. Is there a way to increase the infill in a specific spot? When I increase the density, it only adds more to the spot it’s already filling

I am looking for a spool winder that uses 1K spools as the doner to put them onto a 3K spool for printer use (receiver). It seems all of the larger ones are going in the other direction.

Awesome guide!!! thank you for posting this. i have an older 720p USB cam similar to the one you use in this video. i am gonna try it right now. again, Thanks!

ENGINX = Engine-X

This is great, but I’m just having a hell of a time inserting those TPU flaps!!

Hey, what is the Y axis Timing Belt Pulley Teeth number? please on creality Ender 3 v3 ke

Супер, бро 😎 спасибо за подробный гайд 🤝

What are your print settings? Whenever I print stuff this tall it gets pulled off the print bed near the top.

Thanks, buddy. Such a simple fix, but it worked for me.

Do you know where i can find the firmware 1.2.1.3 for the 3v3 KE? the highest i can find is the 1.1.0.14

Hey amazing videos :) you think there is a way to connect a cellphone as webcam trough the same process?

I’m on my 3rd one. All replaced for free by creality.

Thanks so much! I was messing around with TTPY0 values and USB drivers, the most simple solution is often the one!

thank you, I just can't believe that this shit requires such effort

The issue for me is that the scarf seam does not seem to work at all in Creality 5.1. It does in Orcaslicer and Cura.

Thank for sharing this.

what infill did you use

hello. i couldn't find where to write. in creality print 5.1 version, i want to print two objects. i want it to print one by one. finish one and move on to the other. when i make the settings, it gives an imaginary blue z offset line and gives a too long error. how can i fix it. can someone please try? so that the objects are at least 10 cm?

As far as im concerned this slicer as of v5.1 is still broken. It refuses to slice any model i put though it. just freezes every time at 85% and the computer ramps up fans and cpu just gets pegged. It will stay like this indefinitely. I can do the same model in any other slicer and it will generate the model with supports in like 5 seconds...

In my case pin was fine but PCB wasn't seated correctly. I pushed down on it in the bagnet area and it fixed the issues.

Hi! Does this camera work with other printers as well? I mean, will I see the printing process the same way, and does the night mode work too? I would be using it with an Anycubic machine, and it would be good to know if all the functions can be used with machines from other manufacturers. Thank you very much!

Great video! I had a hunch today to try printing at an angle when a functional part was failing when printed horizontal OR vertical. It was nice to see it all in action, plus some nice Cura tips. Thanks!

You dont want to scale the bolt lenght just the diameter. In this case it bolt lengh was on the x axis. If you want to ignore an axis while scale use Shift+ the desired axis than S. Example:Shift+x than relese the x and press S.

can someone please help. my print is only printing where it shouldend

Great design. I did have one issue with a bad spool to where the drive bit stripped out the drive winder. So I made the winder with two diff styles one with a manual handle the other with a 3/8 octagon post for the drill to grip onto. Printed at 100% for strength at that point.

Pretty cool .

Mine was okay for a while and then the red error light, I minded not to bend it then it got stuck again, I cleaned it with contact cleaner now it works again, hopefully for good. Creality sent me a new one which has a rubber buffer around the metal pin, probably to protect it from bendind and keep dust out

Do you think it would be possible to print all the way down to -5 celcius?

Noo Ender 7 support 😢

hola juanchi

When is it going to be able to add the sonic pad?