Відео

@deft4184 definitely needed. I'd wait a full 24 hrs for the paint tondry and cure before applying the sealant. It's so that the paint doesn't rub off over time when handling it. Hope this helps

​@@BenzoFiguresThanks a lot mate. Might be a dumb question since I'm very new to this stuff but should I apply it on the entire figure for it to be even or keep it only on the painted spots?

I would also very much appreciate some tips on sanding since it is apparently needed according to the comments

@deft4184 i use a matte sealant spray throughout the whole figure so it has a consistent look to it. You can always paint on like a gloss finish for certain areas if it needs to be glossy.

@deft4184 sanding will help the paint stick onto the figure better, but if you are priming the figure, I don't think it's necessary. However, if there is going to be paint on joints or anywhere where the plastics would rub together on, then yeah sand those down.

@@travisbrown1893 oh snap! You're right! He even has a comb too

@@BenzoFigures that’s true. I didn’t even think about that.

@@UncleCroysFigures I need to. Honestly

@BenzoFigures maybe a collab project??

@@UncleCroysFigures yoooo lfg!

Thanks bro! I appreciate it! Gonna try to make different stuff this year other than capcom figures lol

@@BenzoFigures you got this!!

Yeah looking back, probably should've at least been higher than cyborg superman. Still really impressed by that figure lol. Liking the characters obviously affects my ranking, but I still stand by my top 3. Thanks for checking out the video! What was your favorite figure?

Ahhhh i see. Thanks for the info. I'm not used to waves only be like 2 figures. Can't wait for the next waves for sure

@BenzoFigures yea, they've come out in waves of three so far. Can't wait for Vega in the next wave as he is my favorite character.

I agree! Plus it still looks amazing. Really can't wait to finish the line. What's your favorite street fighter figure?

@@BenzoFigures I don't have Guile, Cammy or Deejay yet, but from the ones I have, Dhalsim or Chun-Li. Your pick of M. Bison is still a valid choice though.

Tbh dhalsim is so good, it reallt could be interchangable with bison. Both 10/10 figures

@@fngame1 definitely m Bison then lol. What was your favorite figure

@slinkyG_13 thank you for checking it out! Yeah i heard that those new sonic movie figures are also, and revoltech also came out with a bunch

@devilhunterred lol pretty much

No list is gonna be unbiased. Its literally picking your favorites wich comes from ones personal preferences

@markleon2270 i remember seeing a bunch at Target a while back. I haven't seen it on any online retailers now tho... it's probably on ebay and mercari now. Best of luck! And happy hunting!

@chrchaves I got mine at Target, but it doesnt look like it's on their site now. Hmmmm might have to check out either ebay or mercari

@BenzoFigures Always happens with Target. Thanks a lot! Great list btw, it's always nice when you also learn about new stuff with these

@chrchaves thank you so much! I appreciate you checking out my list! Happy hunting!

@gmarcus4249 thank you! I appreciate you checking it out! Yeah tbh dhalsim and Bison can be interchangable as #1, they are just too good

@kevinmadieros929 yeah it's a 3rd party seller. Wish it was taller tho

It’s a Chinese company afaik so you have to look through sites or stores that support imports.

@@illustratingchristy eyyyy thanks!

Megaman is sooooo good. I need that helmet less megaman when it comes out

@@rorixcreations4770 yeah.... still need to fix it up after I saw the recording lol

@@rorixcreations4770 the idea is there tho lol

Thank you! I appreciate it! Love his mvs design

Eyyy thanks! It's from a marvel legends Clea. Figure it looked similar to the re1 remake jill

@@BenzoFiguresis that who you used for the base body ? And where did you get the shoulder pads for Jill ?

@Itscoldindisbih hello! The base is from a gi joe lady Jaye figure and the shoulder pads also comes from hottestfuzzcustoms. Hope this helps

@@BenzoFigures yes thank you so much

@@Itscoldindisbih best of luck! Let me know how it goes

@@JomasterTheSecond lmao my bad! I thought it was pronounced like gherman from bloodborne 🤣

@@DanaThrake thank you!

@BenzoFigures de nada

@@xbando9546 thank you! I appreciate it!

@@JoeMama-me2yj definitely wanna make more jason figures. I'm shocked that neca never made a jason x figure yet

Thank you! I used mcu starlord as a base with a knightmare batman coat from batman v superman mattel figure

@@kevinmadieros929 thanks bro!

@@r.davidhill7639 hey thanks! I appreciate it!

@NinjaChortleCustoms thanks! Yeah in hindsight, using a magik head would probably save me a lot of headache lol

@@comedianviet thanks bro! I appreciate it coming from the goat!

@@VADtoys eyyy i appreciate it! Love your resident evil stuff

@@PUZZLEBOX78 yup! Was relieved when I found out lol

@@guywhocandraw5746 i think I mixed equal parts of flat blue and flat purple from vallejo

@@BenzoFigures Thanks you! I’ve had an articulated icon I’ve been wanting to turn into a strider

@@guywhocandraw5746 awesome! Let me know how that turns out!

@@southernmercy5962 i just looked it up! Looks awesome! Love re3r design

eyyy i appreciate it! thank you!

@julienmorozof8082 eyyyy nice!! I originally used a Morlun body too but i couldn't get it to work out. What did u do for the coat?

@@UncleCroysFigures i got crackhead ideas when it comes to customizing lmao

@illustratingchristy i don't either lol

I was motivated lmao

Thank bruv! Strider is the goat

@@loveordie4 thank you! I appreciate it!

@@TrenchMan93 eyyyy thanks bro!

@GeekFusion_TV eyyy thank you so much! Yeah it's a perfect base for any ninja

Thank you! Im putting up an update to this Morrigan figure soon. Stay tuned!

Yup! Link in the bio! hottestfuzzcustoms.bigcartel.com/products

@kaizercowan6568 eyyy I appreciate you checking it out! I gotta make strider 2014 one day lol

@@ashun9792 definitely go for it! I linked where I got that head sculpt in the description. Hope this helps

@ I think it’s gone now I don’t see it 😢

​@ashun9792 ooooo i probably should've specify. It's under his Sun Weskong listing. Sorry about that! hottestfuzzcustoms.bigcartel.com/product/sun-weskong-sculpts-accessories

@stevtan407 i used a marvel legends mcu yelena from the crimson dynamo wave. hope this helps