The Modeling Edge
The Modeling Edge
  • 32
  • 67 851
New Cross RC BTR80! l RC crawlers
Finally seeing renders of one of the new 1/10 8x8 chassis from Cross RC and it is the BTR-80! This is the APCs first RC model and will feature a rotating turret and will have amphibious capabilities just like the real one!
Переглядів: 2 018

Відео

New Cross RC Tatra 813! l RC crawlers
Переглядів 1,6 тис.3 роки тому
Preproduction renders of one of the new 1/10 8x8 chassis were released by Cross RC and it is the Czechoslovakian Tatra 813 heavy tractor! While a stable subject for Cross RC it is amazing to see an 8x8 tractor in this scale especially one that isn't as famous as the Russian trucks.
New Cross RC BTR! l RC cars
Переглядів 1,4 тис.3 роки тому
Cross RC announced two new 8x8 chassis and I'm pretty sure there's a BTR APC on the horizon!
1/144 B-314 PanAm Clipper!
Переглядів 3323 роки тому
Building a kit that is almost 55 years old! The absolutely massive PanAm Clipper marks my return to scale modeling and it was an exciting build!
Painting RC Bodies l rc cars
Переглядів 2863 роки тому
Quick video on how I paint my RC bodies!
How to Clean RC l rc cars
Переглядів 21 тис.3 роки тому
How I clean my RC cars and help keep them clean! 100% Silicone by B’laster
ARRMA VORTEKS 3S BLX Speed Pinion Installation l rc cars
Переглядів 11 тис.3 роки тому
A quick look at the brand new Arrma Vorteks and installing the 20T speed pinion! Arrma RC Vorteks 4x4 Speed Pinion For more RC content Checkout CoachD RC: ua-cam.com/channels/F4KqakuqgUIbm-u7FHwETA.html
Building First AMT Kit! 1/25 USA-1
Переглядів 5903 роки тому
My first car kit in 1/25 is of course a monster truck! The famous USA-1 and can’t wait for a Bigfoot!
Diecast Monster Truck Painting
Переглядів 643 роки тому
Going over this fun new hobby I found as a way to decompress from my many miniature commissions and projects! It’s really different from my standard fare but extremely fun!
DnD Miniature Tutorial
Переглядів 214 роки тому
Showing you guys my process for painting DnD commissions! Hope these tips will help you quickly paint quality minis so you have more time to play.
Warhammer Base Painting
Переглядів 234 роки тому
A quick tutorial on how I paint my 40k bases! Etsy: www.etsy.com/shop/TheModellingEdge?ele=shop_open Insta: jager262
Space Marine Detail Painting
Переглядів 144 роки тому
Showing the full process of detail painting on the anodized Ultramarine! Future videos will be shorter, but hopefully, this will help with your detail painting in the future. Etsy: www.etsy.com/shop/TheModellingEdge?ele=shop_open Insta: jager262
Basic Figure Tutorial Face
Переглядів 224 роки тому
Basic Figure Tutorial Face
Anodized Space Marine
Переглядів 304 роки тому
First in a series of videos detailing miniature painting! Today’s topic is airbrushing and metallic finishes! Etsy: www.etsy.com/shop/TheModellingEdge?ele=shop_open Insta: jager262
1/48 F 117 Eduard Cockpit
Переглядів 8 тис.4 роки тому
Building the Tamiya F-117A and doing my first Eduard Cockpit detail set!
1/144 Aircraft Inbox Review! F117A, RB-29, Pan Am Clipper
Переглядів 1764 роки тому
1/144 Aircraft Inbox Review! F117A, RB-29, Pan Am Clipper
M1A2 and HobbyTown Live Stream
Переглядів 244 роки тому
M1A2 and HobbyTown Live Stream
Live Stream Update
Переглядів 284 роки тому
Live Stream Update
1/35 M1A2 Live Stream
Переглядів 504 роки тому
1/35 M1A2 Live Stream
First Look at the 1/48 'Baron Spirit'
Переглядів 5604 роки тому
First Look at the 1/48 'Baron Spirit'
Unboxing Hobby Boss 1/35 AAVP-7A1
Переглядів 2,6 тис.4 роки тому
Unboxing Hobby Boss 1/35 AAVP-7A1
First Look Ryefield Models 1/35 M1A2 SEP TUSKII
Переглядів 2044 роки тому
First Look Ryefield Models 1/35 M1A2 SEP TUSKII
Hobby Boss 1/72 F-22A Unboxing
Переглядів 1,2 тис.4 роки тому
Hobby Boss 1/72 F-22A Unboxing
Painting RedCatRacing Wendigo Team
Переглядів 874 роки тому
Painting RedCatRacing Wendigo Team
1/12 RC Cougar MRAP 6x6
Переглядів 9714 роки тому
1/12 RC Cougar MRAP 6x6
Tamiya 1/35 M151A2 MUTT
Переглядів 8 тис.4 роки тому
Tamiya 1/35 M151A2 MUTT
Oil Weathering Scale Models
Переглядів 1174 роки тому
Oil Weathering Scale Models
Tamiya 1/35 M3 Stuart Light Tank
Переглядів 4,5 тис.4 роки тому
Tamiya 1/35 M3 Stuart Light Tank
Basic Figure Painting: Uniforms
Переглядів 864 роки тому
Basic Figure Painting: Uniforms
Home made Wet Pallet
Переглядів 224 роки тому
Home made Wet Pallet

КОМЕНТАРІ

  • @blumax68
    @blumax68 19 днів тому

    completely dimensionally wrong model!

  • @DroidLocks6971
    @DroidLocks6971 4 місяці тому

    .... Im lovin my big rock 6s and kraton 6s They are daunting Even On Stock Gearing At 100% Throttle ....

  • @t3floz
    @t3floz 6 місяців тому

    Great video! Does regular silicone spray also work?

  • @norbertogonzalez9738
    @norbertogonzalez9738 7 місяців тому

    Te haz equivocado en el armado !!! Haz puesto las armas laterales al vehiculo US que no deverian estar

  • @MrSrtman18
    @MrSrtman18 7 місяців тому

    Come on man. Make this video when ur not doing yard work. Unwatchable.

  • @MrSrtman18
    @MrSrtman18 7 місяців тому

    I dont feel bad buying this car on sale for $279

  • @Rasta3030
    @Rasta3030 8 місяців тому

    I would highly recommend doing this with a mask and gloves. Also outside in a week ventilated area. And without so many opinions. Do you know why no one listens to you? Because its fun to take rc to the beach. Lol. Have fun with the hobby. Don't turn into this grumpy guy huffing pb blaster lol

  • @Volkstiger
    @Volkstiger 8 місяців тому

    The RAF decals are for the atomic test aircraft used at Woomera in Australia in the 50s. A pretty interesting version and the reason I bought the kit. Thanks for the review.

  • @stevenr8606
    @stevenr8606 10 місяців тому

    👍🏼❤ I did a B-58 model in 1968 for my Dad that was a DSO on several. 😊

  • @nsbob70
    @nsbob70 Рік тому

    Now that the video's 2 years old, I'm waiting for mine. I have a couple Arrmas with the Spektrum gear on board. The AVC only works after you pull the trigger. ;) Those drive unit bits can be a real pain! I had to use screwdrivers under mine too. At 11:03, did you actually suggest that the spring tension in the driveshaft helps hold the drive unit in place? hmmm A small flathead screwdriver between the shaft and the e-clip works way better than watching you struggle with those pliers. The safety D-gear only works when the gear on the shaft has the d-shape to it. When the set screw you just put in with no loc tite comes loose, it'll spin on the shaft. I still can't see, on any of the Arrma cars with that drive setup, how one can get a truly proper mesh as the spur gear's not supported on both bearings. Kind of a shot in the dark, take your best guess situation there. I never get down on anyone who makes videos, but between watching you struggle, when we weren't struggling to hear you over leaf blowers or whatever that was, or looking at the top of your head, that was painful. lol sorry man. But hey, I suppose we all do our own thing. If you have fun bashin' that thing around, that's all that really matters in the end. I can't wait to get mine!

  • @missreid86
    @missreid86 Рік тому

    What about using wd40?

  • @CorvetteC6-LS2
    @CorvetteC6-LS2 Рік тому

    Soo pb blaster silicone is safe in plastic movements?

  • @jacobsparks4419
    @jacobsparks4419 Рік тому

    Those e-clips are a pain in the ass!

  • @tonyromano6220
    @tonyromano6220 2 роки тому

    Beach? Just toss truck in the trash.

  • @tonyromano6220
    @tonyromano6220 2 роки тому

    What does silicone do to electronics?

  • @garycottrell565
    @garycottrell565 2 роки тому

    AFV Club also makes versions of this vehicle.

  • @Einfach_der_geilste
    @Einfach_der_geilste 2 роки тому

    You can use water if you dry it realy well. But only if its waterproof

  • @victorlee1965
    @victorlee1965 2 роки тому

    The tools were added to the attachment points and painted in place

  • @RayRiv73
    @RayRiv73 2 роки тому

    Can i assume this spray isnt good on your bearings?

  • @GamezOfWar
    @GamezOfWar 2 роки тому

    Jesus Christ, what a waste of a upload…I CANT HEAR SHIT

  • @ELI-qm6bx
    @ELI-qm6bx 2 роки тому

    💜💜💜

  • @Wildcamp-lifestyle
    @Wildcamp-lifestyle 2 роки тому

    How does the silicone eat t the dirt? surely the dirt is still there but just underneath a layer of silicone so not visible.

    • @themodelingedge2363
      @themodelingedge2363 2 роки тому

      it doesn't eat the dirt it just makes it easier to clean. after cleaning the car I apply another layer of silicone to further seal it.

  • @isaacbannikov4655
    @isaacbannikov4655 3 роки тому

    hello there i am sorta new at scale modeling and i wanted to do a fighter jet and this one looked interesting is this a good one for beginners?

  • @BlackSeaRC
    @BlackSeaRC 3 роки тому

    Looks great but I'll wait to see the price before getting too excited! By the way, it will be 1:12 scale.

  • @fatguyinalittleshop8196
    @fatguyinalittleshop8196 3 роки тому

    I would like to see a complete build. Hummer included.

  • @danpollard4975
    @danpollard4975 3 роки тому

    Hey ya did I've don't the same change and I can't run on a 3s it will do one pass and then goes into cut off mode did you have any problems with yours

  • @eddiekelley527
    @eddiekelley527 3 роки тому

    Great Video!!! This method had my trucks very clean!! Yeah I don't agree with the spraying cars with all that water..

  • @aureliusprimus
    @aureliusprimus 3 роки тому

    Aurelius Primus il y a 1 seconde I don't understand how you adjust the lights. The top light flashes continuously

  • @insanemadmanroom2299
    @insanemadmanroom2299 3 роки тому

    I been using that stuff for years makes you rc look new I use water then blow it off then soak it with that spray

  • @thenault20
    @thenault20 3 роки тому

    I'm heading alit of idk for someone who WORKS AT A HOBBY SHOP 🤣🤣🤣

  • @PavelBastidas
    @PavelBastidas 3 роки тому

    Brother is a 1/12

  • @meanf1502
    @meanf1502 3 роки тому

    3D detail spray is better then pb blast

  • @CoachD386
    @CoachD386 3 роки тому

    👍🏾💯

  • @jimspittal6225
    @jimspittal6225 3 роки тому

    Where did you get a Bigfoot body to fit? I want to do a build with a 78 F250 body.

    • @themodelingedge2363
      @themodelingedge2363 3 роки тому

      If youre talking about the LMT it is the JConcepts 93/95 ford f250 for the ClodBuster. All their Clod bodies should fit as long as you remove the rollcage.

  • @ghanks9589
    @ghanks9589 3 роки тому

    Got a question, Hope you respond. I replaced my Pinion and I tightend it all the way down where you could not move forward or backwards, You could only move it with the gearing to side to side. I took it out for a test drive and got everything tuned up to what I wanted it to be, The Pinion gear just keeps coming lose and flying off. Do I need to glue it? Or what do I need to do ? Thanks

    • @themodelingedge2363
      @themodelingedge2363 3 роки тому

      Hopefully, I'm not too late but you don't want to glue it persay. For the set screw just apply some Loctite or any medium thread locker and let it cure for an hour or two before running the truck again. hope this helps

    • @kez850
      @kez850 2 роки тому

      Don’t forget the e-clip that goes on top of the shaft

  • @RickyD1968
    @RickyD1968 3 роки тому

    Really cool thank you !!!

  • @thatsmyrc
    @thatsmyrc 3 роки тому

    Im getting it and making a hauler out of it to haul my equipment

  • @rdp131
    @rdp131 3 роки тому

    I'll get it for sure :)

  • @CoachD386
    @CoachD386 3 роки тому

    Welcome back

  • @kingranch1962
    @kingranch1962 3 роки тому

    Great kit. The M151 was a great vehicle. I was a Motor T Mechanic from 1980-1993. They were very dependable work horses. Love how you researched the information on the time era.

    • @themodelingedge2363
      @themodelingedge2363 3 роки тому

      Thank you for your service and this kit was an absolute joy to build! Hopefully, the kit stands up to the real thing.

  • @fredtedstedman
    @fredtedstedman 3 роки тому

    You are such a tease !! 18 months later no part 3 , disappointing would have liked to see the finished job !

  • @fredtedstedman
    @fredtedstedman 3 роки тому

    I think I built a Monogram B-58 in the 60's . great jet with a unique look . Wales UK.

    • @ph11p3540
      @ph11p3540 Рік тому

      I wish that model would be manufactured again but Monogram no longer exists. I would love to do an aluminum paneled treatment to that jet. The oxidation and heat stress marks would be a cool thing to simulate.

  • @fredtedstedman
    @fredtedstedman 3 роки тому

    BTR would be excellent for r/c , don't know why there isn't more out there ??

    • @themodelingedge2363
      @themodelingedge2363 3 роки тому

      I know! I have been looking for build plans for one ever since I got my cougar so fingers crossed. New video going up on the other chassis, it's been confirmed as a Tatra 813!

  • @fredtedstedman
    @fredtedstedman 3 роки тому

    I love this kit , better than Italeri for fit , I have built mine as "what if " /" Ace Combay " FA-22 c Ultra Raptor .(see channel ) Wales UK. and yes , stealth aircraft do tend to suffer from lack of parts !

  • @chrisarnold4366
    @chrisarnold4366 3 роки тому

    Hope they can add the scale jet drive for amphibious driving.

    • @themodelingedge2363
      @themodelingedge2363 3 роки тому

      Would love to see that, I know that another company has a 1/16 schiwmwagen with a working propeller so hopefully Cross RC can make it swim.

  • @CoachD386
    @CoachD386 3 роки тому

    That’s tight 💪🏾💯

  • @thatsmyrc
    @thatsmyrc 3 роки тому

    nice info didn't know of this. cross rc has some great rigs thumbs up

  • @CoachD386
    @CoachD386 3 роки тому

    Nice model 👍🏾💯

  • @carlobell2558
    @carlobell2558 3 роки тому

    Ty for the video, it what compressor is that? Mad small, and would like to look into buying one. Peace.

  • @ep9415
    @ep9415 3 роки тому

    I recommend hairspray chipping. It saves a lot of time and it’s easy as you only have to brush the surface which will chip it easily