Відео

Could I possibly get the dimensions of your front tire? Mine runs in Reserve but only runs for a minute or 2 in On and then shuts off completely. And it just started doing it. I’m wondering if I picked something up in the tank? Replaced spark plugs and have a ton of sea foam in there with 94 octane but no joy.

Bonsoir, je dois repeindre ma z900rs café et j'avais besoin d'un tutoriel pour la dépose du réservoir. Autant vous dire que votre vidéo va énormément m'aider. Merci beaucoup d'avoir pris le temps de détailler les différentes étapes. Bravo !

Question: do I have to remove the whole front cone to replace the mirror bracket that are behind the plastic ? The nipples are missalined (just on the right side), probably was hit be something.

I just removed my drain bolt and radiator cap and it’s still not flowing out 😢 trying to figure out what to do now

Good video, I’m just rebuilding the petcock on mine. Did you have to totally drill the rivets out, and if so, did the replacement screws self tap ok ? I’m sure the straws inside are unfiltered, I can’t see anyway they have any mesh over them otherwise. Odd design really, but 80s bikes I guess ? Thanks for the upload, I’m totally rebuilding the engine on mine at the moment, and need to completely repaint the bike, and have cleaned the tank out, so much to do it’s a mess of a bike, which is a shame, but I’m getting there. Appreciate anything you can offer as tips. Thanks Rich 🇬🇧

After this you rebuild it and it work?

Any luck?

Can you do a video of you putting the carburetor back on the bike? I just bought a 1500 and I think the guy has the carb on wrong

I like these bikes but the high footpeg position is the reason I wouldn't buy one. You can't stretch out on these bikes.

I love you Officer k9❤❤❤❤❤❤❤❤❤

My dad has a 95 Vulcan that needs new carbs. I wonder if anyone has ever used the Amazon cv carbs

Good video. Is there a need to burn the system of air? I know in cars I used to turn the heater on to get the air bubbles out. Thanks.

I have the exact same bike, year, colour, mine is all stripped down as presently rebuilding it, engine et al, awesome looking. Mine had a compression issue, white smoke, water in the crank case, being the reason I’m rebuilding the engine, and the tank was like yours. I used citric acid, brought it up nice, after about two weeks, never used any liner as it sprouted no leaks. Carbs are rebuilt, just have the body work to do, as some moron hand painted it terribly, and then onto the forks, breaks, and get the engine back together. Uphill, but lots of fun doing it. I’m in the U.K., these bikes are a little rare here. Yours sounds awesome.

How did you weld it to the bar?

Got one need to sell you for parts

My bike was over heating, so i changed the coolant and thermostat, it ran good for about 45 mins, the over heat light came on, so i pulled over, as soon as i pulled over the light went off, but when i chanhed the coolant i forgot to add some to the reservoir, do you think that could be the cause?

Thanks for the video! Ive had a 2009 Vulcan classic for almost a month, finally tried it in the highway this weekend , and it maxes out at 70 doesnt want to go anymore i think carb is dirty , bike runs perfect thru street up to 60 no problem

This is the only Vulcan I’ve seen on UA-cam with the same style back lights as mine is it a 2005?

It's difficult to appreciate the results of your efforts with such a low quality video resolution. 720/1080 HD would be so much better if you could manage to record in that resolution 👍

I'm 5 months late and I've never seen someone having so much trouble getting the brake piston/caliper to start functioning properly. Good on you for your patience and persistence.

Thanks Dave you have given me the confidence to tackle this job, And save lots of dollars in labour costs.

That's a bugger about the footage.

Good to see the VF 750 running.

Ridden it yet mate? My knees are also old and sore... 😂

❤❤❤❤❤❤❤❤❤❤

Thank you for your explanations! On my bike (1999 R1100RT with 10,000 km) I can't extract the piston to replace.

Thanks for making the video. I was wondering how you got the large clamp that connects the carb to the large port between the engine heads. Did you use a regular allen key because Ive had trouble reaching it due to the angle and tight fit. Should I purchase something else? Thanks again!

How is it working one year later? Does it still working properly? Any regrets?

What happened to make you rebuild the MC? My 95 RS has locked front brakes and brake lights are on. I’ll be rebuilding my MC shortly, so your video will be watched again.

I destroyed my ER6 racebike and wasn’t looking forward to ordering a $300 fuel pump over a broken plastic nipple lol. Ordered the part from Greece last Saturday, hoping he comes thru!! THANK YOU for making this video showing a sub-$300 fix!! Did he ship to US with any kind of tracking or did the part just show up in the mail? 😂

That is very very incomplete. How did you get the carburetors out of their boots?

WAVE WASHERS!

Look closely at the dog.. Notice how he closes his mouth as he starts focusing on the target. He's dialled in big time. 😂❤😂

Your videos are awesome man! Really makes me wanna jump back into an 80's bike.

Got my 97 vulcan 800 for 2gs its a great bike and easy to work on

My father was a K9 officer and we kept the dogs at our place. My dad would tell us to hide in the fields, which we knew well. give us a head start and let Rex or one of the other dogs smell our t-shirts. We were found in minutes.

Good boy!!!!!!!!👍🏼

I thought the milk crate was the single best upgrade for the KLR? LOL

I've seen people weld a small piece of rebar to broken bolts and use that to unscrew it out.

How do you do the rear brakes on a 1999 Kawasaki Vulcan 800

I was so fortunate to see this every year we had a weekend of Schuetzen training in the spring where my brother and other guys showed people how it worked my brother and those guys trained the dogs to be ready for border protection. Police it was so awsome I always remember those times awsome to watch

Very nice job sir

Where did you purchase the bracket assembly? I picked up a 650 and same issue.

Thank you for the video. I did the same stupid thing to my black Z900RS last week, I try to get it smart repaird, a new tank is 1400,- €

What a rubbish video , you actually did not show how to actually remove the cards 😢

Great bike.

Good to see a good honest rebuild intro Not like some of the videos the vrits (small b) put up here. Thanks for the Boston (yip, Cap B) tea party. That sorted the bastards out. Thank you !!

Could a blocked pcv valve cause internal pressure that pushes out the oil through the filler plug ?

Absolutely Beautiful, Incredible, BABY😮😮😮😊😊😊Thanks

Hey Dave, I bought a bike recently that is very similar in the mods done to it as yours. I am curious on your bike when they removed the epa, did they just block off the the reed valves at the top of the valve covers or connect them? Also, thank you for all these videos as a first timer, they have been so helpful.