Відео

Great video, thanks so much for your time and patience!!!

Thank you! I need to do this on my own A6

thanks for this I would have broken mine if I kept trying to figure it out myself

The injector seal seat, what cutter size is it? Tried with a universal cutter, but could not get to the bottom, it was only grinding on the outer ring.

Great job, thanks, really helpfull

Appreciate the video mate. Helped me do my car 👍

Very helpful thanks

Subbed. How much would you charge for a job like this?

Can you tell me if i need to replace the rubber seall in the valve cover the around the injector? Can it be changed without removing the valve cover?

What if that lower bolt still spins, I held the center with a allen key but the nut never tightened . I would contiously spin...

Can you help me find the rubber boots on the glowplugs

King

Thank you, really helpful video. Just did mine, went very smoothly 😊

Thank you! This worked for me, mine had intermittent issues it would turn off sometimes then work other times then it got worse to the point it would only work for a second or two once it was opened then turn off.. I pulled back the wiring and there it was brittle wiring which was barely held together, you saved me a bunch of money!

Mine just broke after washing the car. Not sure if it's the light or the connector that is broken yet, i'm preparing to buy a new light if it doesn't work after it has dried. Great video!

Great video. Simple, straight forward, well filmed 👌

Debreee

With OBD I can skip the process with manual retracting clipper, so all piston will be In properly position to put back caliper on?

Thanks for this mate, very comprehensive, not paying garage fees on such a simple job this just clarifies a few things

Thank you for the video. Does anyone know in which of the 2 ways the copper seals go? Thank you

Hi what about all wheather light ,cant find which bulb are used ?

Thank you, great video!

4:30 How can I get it out? I've been hitting it for an hour and nothing

mine came out extremely hard, took several hours and another person to help me take it out, even the light broke.. Thanks for the video tho, couldn’t do it without you!

Worked a treat, thank you! In Australia, the original was Phillips - replaced with Osram. It’s slightly less white, but OK with that and replaced both lights at same time. Cheers

Thanks for the video!! 👍

Great tutorial mate thanks a lot.

Hi did when you tightened the piston with the g clamp why didn’t you release it back ? Just asking as I’m about to follow your video so any advice will help total newbie but giving it a go

Are the location of the sensors the same for a 2010 A4 Avant? Also will the same replacement sensors you have linked work? Thanks

I'd have been lost without this help. My A7 has these exact same brakes. All other videos have different callipers for A7 videos😅

Brilliant, thank you! I was just trying to work around schedules to drop it at a garage, but now I see I have everything I need but the glow plugs.

Greetings from Minnesota! Excellent tutorial, thanks for the help!

วงจร😅ไฟขอบคุณครับ....a6 c5

What order do they number the cylinders? Is it 1 2 3 on the drivers side and 4 5 6 on the passenger side?

Thanks my friend. I replaced a broken spring today. It came out easier than the new one went in. My spring compressor wasn't the best and the straps slipped. I had to cut the straps off in the end too but the jobs done. Thanks for the help, It was terrifying at times.

You forgot the grease and I messed up on my piston caliper I did counter clockwise and boom a bunch of oil comes out I was pissed 😤 now I have a rip on my rubber sleeve etc

Mulțumesc!

Did you go into the service mode to put the car into pad change option... it didnt say in the video. In other videos it mentions this.

Thanks for the help!

Thanks for this video. I was confused as previous owner had put the spring clips on wrong but your video sorted me out.

No coper grece on the shims

How about the calibration

Perfect fix for my issue on my Audi A6 C7 2012. I had the same issue whereby everything worked on the mmi except the screen being black once fully opened. My screen actually worked initially then turned black half way through the opening/popping out cycle. Then was black thereafter. Turns out my cables were both split and needed repairing. Followed the steps and with a new fuse and works perfectly. Thank you for an informative and detailed video.

Thanks 👍👍👍

Na minha opinião deve-se sempre sangrar o circuito antes de empurrar o pistão/êmbolo para trás. Isto para não fazer retornar o lixo que se junta no êmbolo até á unidade de controlo do ABS. Estarei errado?

Hi, Where about you base mate? I have Audi A6 C7 facelift and I need some jobs.Im from South Yorkshire and I hope you not far away as I have few jobs to do with my Audi. I look forward to hearing back from you

Thank you! Really helped! Getting old one out was insanely hard... Had to break it to get it out... For the new one I just used silicon to seal it, that way I'm sure water wont get in 😅😅

Did one spring last night without this tip and it was a chore. This method made it way easier to get the new stock height spring in

Thanks, it was very helpfull

Hi Mate, Where about you base in UK? I need good mechanic for my audi a6 c7 2.0 tdi ultra . Get back so if you close you have new customer. Thanks