- 4
- 171 597
Ali Aljwad علي الجواد
Приєднався 4 жов 2013
Auto body work
EXTREMELY RUSTY CAR, surprise under the fender liner.inner and outer of Rocker panels Repaired👍
This 2011 Ford Fusion had an extremely rusty Rocker panels and some surprise under the fender liner.
this car got repaired properly and the customer was very satisfied about it.👍
this car got repaired properly and the customer was very satisfied about it.👍
Переглядів: 170 557
Відео
Repair a NISSAN 300zx,Auto body repair
Переглядів 365Рік тому
Edited by YouCut:youcutapp.page.link/BestEditor
Awesome job sir. I got the same problem. Can you help fix it? Where are you located?
Please let me know the location of your shop or some way to contact you.
@Nepal071 I am located in Peoria Illinois
It is my pleasure to fix your car if you are around.
Respect. Great Job
@huffel1000 thank you so much 🙏🏼
Word Damnskippy an awsome ,rust removal ,body repair and automotive paint job.
Hey Ali, what's the name of your shop? I know you're at Peoria Illinois and I would like to take my Ford Fusion 2012 for you to take a look at it
@@luismanuelbarrerabadillo3131 I do work for Maaco peoria. It is the only Maaco in town. Thank you 🙏🏼
amazing work!!
Thank you for supporting the channel 🙏🏼
Where are you based out of?
What type of cutter is being used for the plug welds.
Thank you for commenting and sorry for the late answer, the holes of the plug welds are 8mm.
I meant 8mm drill bit
@@Autobody.repair.with.ALJWAD Okay thankyou for getting back always wondered what the best size would be👍.
How much rapiar inner rockets
I wonder how much that would cost you to get done
I got about 30 hours to do both sides. I wish i could tell you exactly how much, but I work in the shop, and the office does all the deals with the customer. Thank you for supporting the channel 🙏
Very Impressive work! Great Job! I need this done, where are you located lol!
Thank you for your kind words, Sir. We are located at peoria, IL
How much would it cost to do this job? I have one with the same issues but it would probably cost more then what the car is worth! Outstanding workmanship!
I realy don't know exactly how much the owner of our shop did charge the customer. All what I knew that it was very sentimental for the owner of the car to fix it regardless the cost,thank you for your great support to my channel. 🙏🙏
At a meager $65/hr x 17hrs = $1105, plus (modestly) $200 in paints, $50 supplies, $75 materials = $325 x 25% for overhead = $406.25 @ $1511.25 + tax
Where did you get the replacement rocker panels? I also have a fusion and will be doing this eventually.
LKQ is a part company,I think my boss got it from them. Check any auto parts manufacturer.good luck 🙏🏼🙏🏼
How much does a repair like this usually cost?
It depends on the shop's labor rate for body work and paint. I work in this shop as a body tech and I don't write the estimate so I am not sure what we charged the customer.thank you for supporting the channel.
What this guy does is art of auto repairing . not many people can do this job today !
Thank you so much for your kind words.
Ive got a charger with this same issue. I'm willing to pay to fix it right becuase i love the car. Where you located
@jc2478 I am located in peoria Illinois. I will be more than happy to fix your car 🙏🙏
Excellent job
Thank you for supporting the channel. 🙏🏼
It's a really great job. Just a question: What is the average cost for this maintenance?
Well done Ali, you are a gifted sheet metal worker ! (Fixing the sxxt of Ford)
Thank you so much for your support 🙏🏼🙏🏼
Good Jop. Perfekt,
Thank you for supporting the channel 🙏🏼🙏🏼
One hole, little rust, couple of years without noticing and that happens.
عمل متقن❤❤❤❤❤
بارك الله بك وشكرا لدعمك القناة وعيدكم مبارك وكل عام وانت بخير. 🙏🏼🙏🏼
Price?
Not sure exactly how much our shop charged the customer.
Nice job!!!!
Thank you for supporting the channel 🙏🏼🙏🏼
Nicely done. I'm about to start similar work on my old Jaguar, both ends of both outer sills rotted out.
Good luck with your next project and thank you for supporting the channel 🙏🏼🙏🏼
All that work for a disposable POS Fusion lol!
Yeah but it's still a customer car man.
280,000, miles on mine and it's still running strong but it does have rust in that exact same spot. Never left me stranded or on the side of the road
On my Chevy van big rust on lower under doors rocker panels I got some ABS black plastic 6 in and ran it through a table saw cut it in half. Two pieces the length from tire to tire. Drilled out resessed holes in top and Screwed in self tappers.. Black Caulk the top. Underneath I bent 5 bolts connected to anything. It's ugly Rusty mess but it worked and it will never rust there again. Oh I forgot I used old engine oil in a spray bottle mixed with some paint thinner and sprayed all the underneath before I started. For other projects, If you want free metal just find a commercial metal shop dumpster. If you get lucky you'll find the primed and painted with the plastic film overlay.
Thank you for your comment and your support to my channel 🙏🏼🙏🏼
what about the place for the lift?
It is supported by a thicker gauge plate to lift the car safely.
what about rust protection on the inside of that freshly repaired patch? in just 2 to 3 years time it'll be worse than before...🤮
I applied primer all over the inside panel and added cavity wax through the drain holes using a 360 degree nozzle to make sure that the cavity wax(corrosion protection material)cover the entire inside panel.🙂
Wow. I like your work.
Thank you for supporting the channel 🙏🏼🙏🏼
fto have done it in under 10 minutes im impressed lolol.. jk.. all jokes aside. great job. having to fabrication your own panel is a pain in the butt.
Thank you so much for your kind words. Thank you for supporting the channel 🙏🏼🙏🏼
Very good work ......
Thank you so much 🙏🏼🙏🏼
Brilliant work 👏 looks amazing
Thank you for supporting the channel 🙏🏼🙏🏼
🔥🔥🔥🔥🔥🔥l 😎😎😀😎😎😀
🙏🙏🙏
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thank you so much 🙏🏼🙏🏼
quality job.
Thank you so much 🙏🏼🙏🏼
In Europe they will charge you $1000 at least for that job, and give you bare metal without plaster and paint finish.
Thank you for supporting the channel 🙏🏼🙏🏼
Хорошая работа, молодец
Ja uvijek prije punila stavlja Epoxy primer 2k, nakon toga punilo, ili pasta za lemljenje i kositar pa sve ostalo kako vec ide...
Well i am gobsmacked i thought that cars didn't rot these days how wrong was i my vauxhall combo is a 55 plate and still solid under neath
Con todos los materiales y herramientas. Y la buena voluntad para hacerlo. "Felicidades"
Great job carried out there, well done 👏 ✔️
Thank you Sir for your support 🙏🏼🙏🏼
... The service remained very good colleague ! A strong embrace and excellent thursday !
Thank you so much for supporting the channel🙏🏼🙏🏼
Drill a drainhole in the inner section if possible spotweld lowwerside if not then drill 8mm holes before you put it on the car and if done correct welding you don't need to put fiberglass on the panel and wax the inside after painting
I made sure to drill a drain hole, the welds done correctly but I plug welded because there is no spot weld machine in the shop also, I sprayed cavity wax inside the panel using a 360° spray tip.the reason I put fiber glass is because the panel I received was defective so I had to re-fabricate the panel and that caused deep dings and hammer prints.i couldn't show every step of the repair process because of the length of the video(17 hours). I had to remove some important content to make the video less then 10 minutes.also,the low quality of the camera of my phone played a bad role too. Thank you so much for sharing your experience and i am always grateful to read any valuable information that makes the job better.thank you for supporting the channel. 🙏🏼🙏🏼🙏🏼
Yes apart from the drain hols a first class job fabricating that sill end result looks brand new 😊all the best to you
Thank you for your support 🙏🏼🙏🏼
Thank you for your encouragement 🙏🏼🙏🏼
Nice job mate 👍🇬🇧
Thank you for supporting the channel 🙏🏼🙏🏼
Ford Company . Made in Germany ... german precision and quality....never ever !!!
Not bad my guy. Not bad at all. A little discrepancy in the jamb on the right side but much better than I and most can do! Especially using sheet metal instead of prefabbed parts! Good work brother
Thank you so much for commenting and supporting the channel. The process was about 17 hours of work. I tried my best to choose the important part of each episode and make it under 9 minutes video. I misplaced the last two episodes and that caused some discrepancy. Since it was my first video, I will do better job as far as uploading the videos to have better idea of the repair process and not create any confusion. Thank you again Brother.🙏🏼🙏🏼
Excellent job ! 👍
Thank you for supporting the channel 🙏🏼
Главное шпакли побольше
Thank you for supporting the channel 🙏🏼
Ali, you should post a video of your shop, and let your viewers know what city your working in...if you're in michigan, Id bring my car in for rust repair that is very similar to this, shown in the video.👌
Sure I will, we are located in Peoria IL. thanks for supporting the channel and I promise I will make more valuable videos. 🙏🏼🙏🏼
I need this exact! type of repair on my car. Now if I can just find someone like Ali to do it. Ali is a craftsman...he takes pride in his work, and does an excellent job!! job. 👍
Thank you for you kind words. I do my best not to take short cuts because as how I work hard people also work hard to make money and spend to repair their cars. We are located in peoria IL,thank you again for supporting the channel. 🙏🏼