Відео

@@ahmedaly2022 it sounds like your battery is completely dead. Have you tried a different battery? If the problem persists. It could be an internal issue. I would check the little prongs at the bottom of the battery tray where the battery connects to. see if one is bent. Also, you know that the GoPro subscription is $50 a year. You get 2 free replacements a year, no questions asked.

Thanks man!

Thanks!!!

Thanks!! Here is the link to the UA-cam feed that they streamed it to: ua-cam.com/video/Ex-XJTYpVMg/v-deo.html

Thanks!!

Thank you!

I work with the Drift organization and the race track.

It’s a namelessRC one. But other brands make the same one or get it from the same supplier.

Suport for GoPro 6 basic .for naked projek...or just for GoPro 11

@@TheLeomaul GoPro 6 uses a different BEC. BetaFPV sell those.

That where the record button was. I removed it.

Not the record button but the piece of plastic below the USB board. There is one hole to the inside of the camera and nine holes on the outside of the camera.

I can’t remember off the top of my head. I’ll have to look at the case.

Ok, I just looked at the case. The 3x3 holes are microphone holes.

Thank you

Yeah, I used a hacksaw the first time because that’s what people said to use. Once I took it apart. I realized that a sharp blade would do just fine.

It works good for most part without a fan. It did overheat a few times on really hot days. I find that if you plug in your quad and fly right away. It doesn’t overheat.

@@MartinWithDroneBuzz i prefer without fan, because i need the audio to be recorded.

@@TERBANGFPV keep it out of direct sunlight before takeoff, it will help.

Thanks!

The HDO 2

@@MartinWithDroneBuzz ah, right :-) I'll try with sky03o which are locked to 4:3 like the HDO1... Have you ever tried to set it to 4:3? Does the VRX stretch the image or give you black bars left and right? :-) By the way, the drone I ordered with it is a cinelog25 with the avatar vtx nano kit, should be exactly the same as yours :-D

@bjornce6 nice, it’s a sweet little drone. I don’t remember what setting I’m using. I only set it once and been flying it ever since.

@@MartinWithDroneBuzz then it's 16:9 for your hdo2's :-) Thanks a lot for your answers!!

@bjornce6 anytime. Now I’m going to double check! 😁

Yes, it works without the front screen. You can remove it.

@@MartinWithDroneBuzz about to make a dank GoPro 10 cooling solution now lol thanks

@TheUnknownExplorer666 this is the fan I put on: m.aliexpress.com/item/1005003160534956.html?spm=a2g0n.order_detail.0.0.5643f19cmp68eD

@@MartinWithDroneBuzz sadly the main reason I want bare steel is because it needs to passively cool so it don't ruin audio

@TheUnknownExplorer666 I see

I haven't tried Flywoo filters on an NamelessRC before. I use the Mavic 2 zoom filters. The Freewell brand fit best.

@@MartinWithDroneBuzz in this case no fan ? its ok ? geprc case and fly woo have a fan..is it ok to use without fan ?

@AntonEvdakov yes it is ok to use without the fan. I used it lots without the fan.

No, it is totally different.

Oh nice! Yeah, try it. You could get a couple naked GoPros that way. Let me know how it turns out.

I added a fan. Without a fan it would only overheat on hot days and in direct sunlight.

@@MartinWithDroneBuzz so its 32g with the fan?

The fan is 1/2 a gram

32g

Thank you!

Thank you!

🤣

Thanks!!! It was surreal being there!!!

I’m glad it came apart easily for you. Yeah, that screen is in there good. Awesome that a new screen is $10!!!

Yep, I broke my screen thanks to this video. He's all like "you will hear it cracking and think it's breaking, but it's not." Fucking wrong! It was.

I’ve never flown the DJI FPV. Try 30°. Note that if you can’t keep up with the cars increase it to 40°45°. Also, if you if you overshoot the cars at 30°, try 25°.

Nice!!!! It was awesome!!!!

It does! I run INAV now and I don’t have any issues.

No way!!! That’s cool! I don’t get to see my drone in action! 😂😂. I always have my goggles on. Would it be ok if you shared it with me?

It should still connect.

@@MartinWithDroneBuzz Uffff thanks a lot

@@Jun-FPV no problem!

I agree!

To put on an FPV drone that can't carry much weight

@OranJuno that’s correct

I think there are some you can buy. I haven’t looked at the GoPro 9/10/11 but there were some for the GoPro 8. You may have to look up companies that sell naked GoPros. They usually have modified sensor ribbons.

@@MartinWithDroneBuzz thank you!

Any time!

I use the 1S system in the cinelog 25. I bolted it to the bottom plate. I used 2 screws through the slotted areas (not 4). You’ll need to file the place you’ll put the screws in as the slots are not wide enough to fit the screws through. Then you’ll also need to add washers/nuts between the VTX and plate so the VTX doesn’t touch the carbon fibre.

@@MartinWithDroneBuzz thanks so much for the answer, I’m probably going to use a v1 for my build and I just want to be Shute that it will fit. How close from the standoffs and from the propguards is the vtx ? Thanks in advance !

The size of the v1 and the nano vtx is the same apart from its thickness so if yours fits large enough, mine will too I believe

@baptiste_nonat the 1S VTX board is smaller than the FC so it fits good in there.

@@MartinWithDroneBuzz okay ! Thanks SO MUCH for that 😁😁😁😁. I can now order my frame without fearing it won’t fit ! Thanks again, have a nice one 👍🏼

Yes!

That is the Stratotech Raceway on the north side of Edmonton.

There is a way. I did it on a GoPro Hero 4 to be able to change lenses. I used a kit from there before www.back-bone.ca/gopro-mods/

Hahaha that made my day! I don’t know how they do it. I tried putting one back together. Just don’t put it in the water 🤣🤣🤣

You got this!

Thank you! I appreciate that.

Thanks! 🙏

The only time I changed the lens on a GoPro was on the GoPro Hero 4 black. I used this company for the 12mm lens. www.back-bone.ca