outie555
outie555
  • 101
  • 2 088 313
How to fix Z Axis issue on a brand new Creality Ender V3 3 KE
This is an unfortunate issue out of the box with some of the CREALITY ENDER 3 V3 KE 3D printers.
mine had this fault as a brand new never used printer but was able to get a new part for free from Creality customer support, under warranty.
they were super helpful but didn't give me any instructions on how to fix it, but it was simple enough.
You can bypass this error by power cycling the printer until it passes. took my about 20-30 times doing this until it worked. This enables the printer to be used but you will still have issues until you replace the faulty circuit board. I still have had 500g of filament usage with the fault so you can certainly still use the printer to print quality prints. you will just need to calibrate the Z Axis each time you turn the printer on.
Переглядів: 2 499

Відео

How to fix YouTube comment keyboard glitch on android phone
Переглядів 2,2 тис.5 місяців тому
how to fix an annoying glitch on your Android telephone by going through your settings on your phone this will fix the keyboard from glitching when you are trying to type a comment into UA-cam. this setting is easy to get all you need to do is go to settings about phone software information, enable developer options by pressing software information seven times. then go to settings developer opt...
How to make FINGER LIME infused VODKA
Переглядів 796 місяців тому
This video is on how to add finger limes to 700ml of vodka. 9 small finger limes were harmed in the making of this tutorial. can drink straight away or leave for a few days for stronger flavour. finger limes are a native Queensland Australia citrus. These ones taste like sour warhead lollies.
How to repair a FENCE POST - Termites and Wood Rot
Переглядів 1266 місяців тому
Simple way to repair non-structural damage to wooden fence post.
How to remove the clip on a SONY ECM-LV1 Microphone
Переглядів 1267 місяців тому
but why? so you can use this as a helmet microphone for motorcycle vlogging or motovlog.
Basic restore - Valor 525-R Paraffin Kerosene heater
Переглядів 3,2 тис.9 місяців тому
this is a Valor paraffin heater from c. 1920's. I bought it from an antique store and have done a basic restore on it, which involved replacing the original wick that was stuck inside the heater. this is very similar to the Perfection 525 heater. Valor is the English version, and also popular in Australia before electricity was available in homes from 1900-1940. some people use them these days ...
how to install headlight motor is200 is300 clip it in
Переглядів 20810 місяців тому
I had to remove the headlights to clip the motor in, otherwise the ball joint won't seat inside the height adjuster for the beam.
How to fix a stuck gas lift bed
Переглядів 120 тис.10 місяців тому
This is the easy way to fix your gas struts if they are stuck on your gas lift bed.
How to remove a auto headlight motor is200 xenon
Переглядів 242Рік тому
how to remove the auto levelling headlight motor on a Lexus is200. both sides have the same motor/part. mine are both seized up due to rust. I believe they got moisture inside them through the plug when I disconnected them for a few years due to the axle sensors playing up. both axle sensors have now been replaced with Toyota Camry ones (I think, was a while ago) and they work (dash light not s...
How to install WiFi on a Mitsubishi MSZAP 7kw Airconditioner
Переглядів 90 тис.Рік тому
How to install WiFi on a Mitsubishi MSZAP 7kw Airconditioner
How to setup a Raised Garden Bed
Переглядів 213Рік тому
How to setup a Raised Garden Bed
How to install eBay Bicycle Luggage Rack
Переглядів 183Рік тому
How to install eBay Bicycle Luggage Rack
How to clean a chimney flue
Переглядів 1,8 тис.Рік тому
How to clean a chimney flue
How to clean mould off leather
Переглядів 7 тис.2 роки тому
How to clean mould off leather
ALDI Special Buy - Child Convertible Car and Booster Seat 2022
Переглядів 7 тис.2 роки тому
ALDI Special Buy - Child Convertible Car and Booster Seat 2022
How to connect WiFi to Haier washing machine HWF85AN1 SmartHQ App
Переглядів 20 тис.2 роки тому
How to connect WiFi to Haier washing machine HWF85AN1 SmartHQ App
Ryobi 36v Brushless Lawn Mower Review
Переглядів 6 тис.2 роки тому
Ryobi 36v Brushless Lawn Mower Review
Ryobi One 18v Cordless Edger Review
Переглядів 18 тис.2 роки тому
Ryobi One 18v Cordless Edger Review
Ryobi One 18v Line Trimmer (Whipper Snipper) Review
Переглядів 15 тис.2 роки тому
Ryobi One 18v Line Trimmer (Whipper Snipper) Review
How to fix a Bose Acoustimass Subwoofer
Переглядів 92 тис.2 роки тому
How to fix a Bose Acoustimass Subwoofer
How to make legs for Weber Kettle BBQ
Переглядів 6 тис.2 роки тому
How to make legs for Weber Kettle BBQ
How to make Passionfruit Vodka
Переглядів 4,3 тис.3 роки тому
How to make Passionfruit Vodka
How to fix B200 error Canon MX870 printer
Переглядів 40 тис.3 роки тому
How to fix B200 error Canon MX870 printer
How to collect cucumber seeds 🥒
Переглядів 5793 роки тому
How to collect cucumber seeds 🥒
Crazy SWEET POTATO Science Experiment - [part one]
Переглядів 7663 роки тому
Crazy SWEET POTATO Science Experiment - [part one]
Easy way to separate seeds from pods and chaff
Переглядів 13 тис.3 роки тому
Easy way to separate seeds from pods and chaff
How to pull apart a M4A1 Gel Blaster Magazine DIY REPAIR
Переглядів 35 тис.3 роки тому
How to pull apart a M4A1 Gel Blaster Magazine DIY REPAIR
Girraween National Park, Queensland - Drone
Переглядів 6134 роки тому
Girraween National Park, Queensland - Drone
How to change the combination on a torque helmet - ALDI
Переглядів 1,4 тис.4 роки тому
How to change the combination on a torque helmet - ALDI
Tornado Cleaning Brush - Power Force - ALDI Review
Переглядів 7 тис.4 роки тому
Tornado Cleaning Brush - Power Force - ALDI Review

КОМЕНТАРІ

  • @ZamiOwais-e5t
    @ZamiOwais-e5t 16 годин тому

    Omg it's fixed! Thank you!

  • @Berlin-Amerikaner
    @Berlin-Amerikaner День тому

    Thanks!

  • @noudialp
    @noudialp День тому

    You're a life saver! Thanks a lot!🎉❤

  • @adityavardhanreddy1176
    @adityavardhanreddy1176 2 дні тому

    Thanks so much Mate, you are saviour ❤ we did it exactly as you told it worked 😊

  • @bphlebotomist67
    @bphlebotomist67 2 дні тому

    I have been suffering with this for forever!! IDK why I never looked up anything about it 🤦🏻‍♀️🤦🏻‍♀️ I just want to say, THANK YOU!!!! I won't have to get pi$$3d off anymore thanks to you. 😊😊 Edited to say, this comment was easy to do AND easy to edit 😅😅

  • @Kitty-g8h4v
    @Kitty-g8h4v 2 дні тому

    omg thanks!!!!!!!

  • @gabrielcitrowske8897
    @gabrielcitrowske8897 2 дні тому

    Checking to see if it works

  • @Sen4D
    @Sen4D 2 дні тому

    After replacing the diode the device goes on and works sometimes a minute sometimes longer then it turns orange, off, white on and works again. And this goes like a loop. With the 3,5mm jak same issue. Any idea ?

  • @leanrupp1833
    @leanrupp1833 2 дні тому

    Help! My problem is that when I push it down it opens again, it doesn't stay down where it supposed to. Please help me guys, im so close to burn that shit.

  • @nsid89
    @nsid89 3 дні тому

    Trying to add a comment here after following the setting. Fixed! Cheers!

  • @ajtechs3346
    @ajtechs3346 4 дні тому

    Thank you bro❤

  • @mohamedtarig
    @mohamedtarig 5 днів тому

    I thought that it's defective comes in my new bed 🛌 today all I do it correctly just this crazy thing makes me feel bad whole Damm day

  • @gast4215
    @gast4215 6 днів тому

    Ok, I am also testing your tipp by writing this comment: Thank you so much! This glitch was really annoying! And the best when following your steps was, that I found what I was supposed to find exactly where you showed in the video. Often this is not the case. Thank you again for your help!

  • @thetrader-dl2mn
    @thetrader-dl2mn 6 днів тому

    మీరు అమెరికా అందుకు వెళ్లారో మత ప్రచారం చేయడం కోసమా??😂😂😂😂

  • @Baker3939
    @Baker3939 6 днів тому

    Bro, thank you so much. I been dealing with this for maybe 2 years. I'm just so used to it freezing that I just start typing my comment in notes and copy and paste 😂. I already had developer options enabled, so super quick fix! *S9+ Samsung

  • @Zatochi39
    @Zatochi39 7 днів тому

    Thank you man its work well

  • @Zatochi39
    @Zatochi39 7 днів тому

    ❤❤❤

  • @beemo1749
    @beemo1749 8 днів тому

    i love you unc you saved me🎉

  • @markr8650
    @markr8650 8 днів тому

    Isn't it easier to talk? What a gimp

  • @firashashash7371
    @firashashash7371 8 днів тому

    صهاينة ما بتسترجو تكتبو الجيش السوري وبتقولو جيش النظام . والجيش الاسرائيلي عادي تكتبوه ما

  • @nomercyforthewicked
    @nomercyforthewicked 8 днів тому

    Thanks for making your video and helping others , I found out this fix over 7 months ago had this glitch on the Huawei p30 pro,

  • @Missterpaja
    @Missterpaja 9 днів тому

    Why you change the sensor?

  • @ianLord77
    @ianLord77 9 днів тому

    Same here, been trying to find a solution for this very annoying glitch for a very long time and this is the only fix that actually worked. Many, many thanks! 💯

  • @PiimS23
    @PiimS23 9 днів тому

    Damn have been having this issue for a couple of years now. Didn't actually care enough to look for a fix, just stopped writing comments on my phone. Can't believe the solution was this simple and straightforward. That being said, it should have never been an issue in the first place. Completely ridiculous!

  • @pnarsabr773
    @pnarsabr773 9 днів тому

    Aman tanrimmmmm .. yatagim cop olsu sanmistim . Tesekkur ederim ❤❤❤❤

  • @chinita1pr
    @chinita1pr 9 днів тому

    Testing... IT WORKED! Thanks! 🎉❤

  • @112Ikhlass
    @112Ikhlass 10 днів тому

    Thanks!!

  • @k3v1ng
    @k3v1ng 10 днів тому

    Thanks! That specific step of closing the lid while the cartridges slide to the right!

  • @justinrobertson2089
    @justinrobertson2089 10 днів тому

    I bought this heater, and cleaned it up, but it gives an uneven burn , so I bought a new wick, hoping this would change it but the same issue. Any ideas?

  • @SimonJutz
    @SimonJutz 10 днів тому

    Super Video! thanks - I just repaired my dead Acoustimass 300!

  • @paulohtobias
    @paulohtobias 11 днів тому

    Confirming it worked on my Motorola Z2. Thank you!

  • @shanekajohnson63
    @shanekajohnson63 12 днів тому

    Thank you

  • @TheMrokspok
    @TheMrokspok 12 днів тому

    Thank you man. Our bed experience same issue. We try your idea and it works well!!!! ❤❤❤ Thank you man.

  • @fishonwithjp
    @fishonwithjp 13 днів тому

    Thank you! This comment is proof it works!

  • @Deathmaster2100
    @Deathmaster2100 14 днів тому

    Then theres the blood ravens

  • @gillejohn9
    @gillejohn9 14 днів тому

    It works!

  • @muhamadnurfanssurihadiau9481
    @muhamadnurfanssurihadiau9481 14 днів тому

    Nice! Thank you so much

  • @bandoyt9781
    @bandoyt9781 15 днів тому

    100% worked!!! 🎉🎉🎉

  • @bandoyt9781
    @bandoyt9781 15 днів тому

    Thankyou so much for making this video for all of us experienced this annoying issue. IT WORKED!!! ur the best thanks

  • @abdullahaloraini5533
    @abdullahaloraini5533 15 днів тому

    You are a life saver, many thanks ❤

  • @emaluma2003
    @emaluma2003 15 днів тому

    I love you so much. Thanks😭😭😭❤️❤️❤️❤️❤️💕💕❤️💕❤️ marry me pls sir

  • @d4mp
    @d4mp 18 днів тому

    it works

  • @loribernardo4024
    @loribernardo4024 19 днів тому

    THANK YOU!!!

  • @I_like_gg
    @I_like_gg 20 днів тому

    It worked! Tjx

  • @joshfurfur1260
    @joshfurfur1260 20 днів тому

    Finally I can comment and say thank you.

  •  20 днів тому

    You're a legend mate, literally the only solution that actually worked the other ones I find online are complete bullshit.

  • @AlacrityGamesTX
    @AlacrityGamesTX 20 днів тому

    omg... thank the elder gods for this fix! It's been a pain for a year for me.

  • @devoncarr3653
    @devoncarr3653 20 днів тому

    How did you find out which part was broken? My bose speaker goes on and off again hasnt lost power completely but i wouldnt know if its the same part or a different one?

    • @outie555two
      @outie555two 16 днів тому

      I found out by digging around the internet for what fails on them. Your problem might not be the same as mine just didn't turn on one day. But for the cheap cost of the chip, might be best to just try it.

    • @devoncarr3653
      @devoncarr3653 15 днів тому

      @@outie555two Thank You

  • @sharepointeverywhere8828
    @sharepointeverywhere8828 20 днів тому

    Your solution is Working so far. There's no way I would have guessed that this option would fix it.

  • @aeryn_mobil
    @aeryn_mobil 21 день тому

    Oh my gosh, thank you! This has been driving me nuts for forever. By any chance, does anybody know a fix to a separate problem... my Samsung swipe keyboard has recently stopped recognizing common words as I'm typing. It's not doing the usual autocorrect nonsense, it's decided to not type in anything at all.