Відео

Eeeee thank you so much. I've had my new blade in the car for months couldn't get anyone to help me. Now because of you I don't need them. You made this so damn easy to see and understand. To hell with all the males who wanted sexual favor for something that you showed me how to do myself and only took 30 seconds. 😂🎉❤Hallelujah

Best vid I've seen on the subject.

I did it on the first one, then figured I could immediately do the second one, struggled with it for 5 freaking mins before rewatching the video, then got it on the first try lol. *KEY TO PEOPLE STRUGGLING WITH THE SMALL J-HOOK MODEL! Make sure when you're trying to take it off to do what he says and turn the blade horizontal, then press the tab before pulling the blade down to release it from the arm. I kept screwing up because I had the blade turned to one side or the other. It wasn't until I re-watched the video and saw that he said and showed, to turn the blade flush/horizontal to the vehicle. Again, this is for the small J-HOOK model. Thanks again SO MUCH for taking the time, and caring enough about your fellow man to make a video like this. You ROCK!

What about a reverse J hook? I have one and they’re a b to get new wiper blades for.

Well I asked the handsome man at Autozone to put them on ❤

It will come up really easy they say...well the blisters in my fingers say otherwise😂 perhaps the second time would be easier

Disc grider did the trick

Thanks for the instruction.

Thank you. I just needed to know whether it was a J hook or not so I wouldn't be afraid of breaking it by pulling hard. Saw other types of connections and this one was the one.

Perfect, thanks.

Thanks for your tutorial

Thank you it is really helpful!

Possibly the most frustrating thing on earth

Except mine isn't doing that easy spin thin mentioned. I'll figure it out

Thank you, I was having a tough time get the old one off...but found success after watching your video!!

So damn frustrated. The ‘simple’ part simply doesn’t work for me. I keep pressing and the damn thing won’t slide off

Agree with last comment - 30 seconds once I knew what to do. I had to push pretty hard to release old blade from hook after depressing the plastic tab. I was afraid to push hard until after reviewing the video clip.

Thanks! Took me 2 seconds to remove them. I should've started here😂

What a useless video

Great tip about the towel on the glass!!

Thank you for uploading video , I was on the verge of snapping wiper just to get it off.

Yeah no. This isn't working on either. Pretty weird that they are BOTH not coming off with your instructions. I'm ready to crack the windshield with my hands in frustration. Lol

Thanks very much. The button didn't do anything and mine were stuck on the arm. But I saw how the button pushed thru the hook on the arm, so I used a screwdriver to get them off. Also using a towel to protect the glass was a great tip :)

If the wiper is old, the "button" will almost ALWAYS be broken off so there's no button to see. This complicates what should be a simple operation and you should add this detail. I don't believe I'm the only one who discovered this through struggling to find this button to release the blade!

TIP: If the wiper seems stuck, with the wipers in normal operating position try angling one end and then the other toward the top of the windshield a few times to loosen the bond with the J-hook. Every time I change them out they are ALWAYS stuck and need some loosening up and then they will come off pretty easily, but not before!

Yet another video that is beyond pointless. I have a wiper like the orginal one you took off and there is nothing on this website that explains tlhow the Frick it works

Great vid!!

Thank you! ❤

It's a lot easier to do it too when it's not raining

Oh. My. Goodness. THANK YOU! It took me two minutes to change each of my wiper blades after watching your video!

It seems like the damn things were completely jammed, and then after watching this video they came off smooth as butter. Just had to move them in the right way. Thanks for uploading this, it really helped

Well, this video is worthless

great video, thx!

Mine has a pin but is a J-hook design. Should I snap that pin off? Don't see anything on my new wipers where a pin is needed.

what do you do when that plastic piece to hold down has broken off? How do you get the windshield wiper off then?

Thank you so much!!! I watched like 2 or 3 other videos and I didn’t understand how to get the wiper unhooked until you talked about the little plastic tab that locked it in place and I managed to pull it off and felt so empowered 😂

Just changed my wipers with this tutorial, thanks!

Thank you! You saved me so much time. I really appreciate it

Where he says “it’ll come off real simple” you have to push the wiper down like it owes you money.

Somehow I feel like I'm going to ignore the towel and end up cracking my Windshield

Thanks for this! Making sure the new one snaps all the way down was the issue for me. You do have to apply some pressure before it will snap in.

Think I've come to realize no matter what brand of wipers you use, none of them come apart and go on too easily and most of the comments show I'm not the only one who feels this way.

Thanks! That made it easy!

Thanks!

Thank you for posting this video. It really helped me out!

Thanks very helpful video

For the love of God, it won’t come off

Connection, guy with one eye and hook, hood connection?

Just wanted to let you know your video was spot on. I have Rheumatoid Arthritis and thought I didn't have the strength to do it. I was so frustrated with not being able to do a simple task. After watching your video, I went downstairs and just got the job done in no time. Thank you for your precise video.

Best video that I have watched regarding the changing out of the blades. The towel on the windshield is a lifesaver. Thank you!