Відео

What's the advantage of a titanium handle over a hickory handle? Hard to justify the price of titanium for me. "Wood handles break" isn't really a problem for me because I use pry bars for prying.

The only reason for putting your thumb behind the handle is when you’re nailing above your head. I be been a carpenter for over 50 years. Grip it properly for best results, not with your thumb behind the handle.

First set of tool bags and belt from Occidental looks like it gave up the ghost about 2 miles back. Time to give it a eulogy and send it home.

How much $$$

Very nice

Молодец настоящий мужчина!

Just ordered mine! Same setup!

For that money you can buy a nail gun. Then who needs a framing hammer. My plumb 13 has lasted decades. You had to modify the claw! Ridiculous

A good hammer is an investment towards your elbow and wrist.

Will a painters 5 in one fit anywhere in that?

Nice. You mentioned that your threads are 3"x11". How much is it from one thread to the next (rise)? 7.5"?

The Occidental comfort belt is better than the buckaroo belt imo.

Part of the reason it drives nails better, I'm assuming is because the hammer face is angled slightly for a more solid hit vs sometimes glancing blows with other non angled hammer faces. Equating to less nails getting bent over while driving them in with the hammer. Just my two cents. Real happy with my custom gold Martinez

Hello! ...I also want to buy a Buckaroo belt, and I have a 90 cm waist, how many inches do I have to get it to be good for me? Thank you and keep up the good work.

awesome setup dude.

Good work. Turned out great.

I first purchased mine for drywall installation. I’ve been doing this for years. I was tired of carrying big lumpy pouches on both sides. I liked it so much that I purchased another one for my second set of tool pouch for small framing projects. Word of advice, unless you are hanging upside down with your pouches attached, that chisel won’t fall out.

If anyone is wondering, this buckaroo works with the occidental leather suspenders however you will need to use the accessories it comes with at least on the back side of the belt because it has 3 loops for the suspenders instead of 4. But the 2 in the front will work

TB3 handle is not replaceable, that's the exact reason I made the switch to the M1

I have considered a Stilleto hammer for my finish carpentry company, the tool dealer in my area steered me away form the brand, the owner broke a tooth pounding a framing nail. The warranty was voided because he used the hammer, another used the teeth to pull a nail broke them off, again the warranty was voided due to miss use, should of used the side pull feature instead try to get you to buy a Martinez. the warranty covers the hammer with no fault within reason usage. Thanks for the video.

How long do they last

The outer belt is not leather. If you look in the prong holes you will notice fibers indicating it is TPU or PVC coated webbing which is better than leather. The glossy/textured area on the signature belt is also coated webbing merely in a translucent finish. The main belt attachment infront is the only leather on this belt. Biothane is a good example of a company specializing in TPU and PVC coated load bearing webbings. Leather, no matter the type, will break down quickly with chemicals and sweat so Buckaroo opted for the most resilient option that is more durable than leather and actually load rated to carry weight. Many horse bridles are made from Biothane and the like. The leather portion of the Buckaroo belt is similar to a full grain Double Shot leather where it is treated through with wax and or oils before dye. This leaves a buttery soft finish and good water resistance but it will break down over time/stretch.

Can’t believe you cut it like that.. smh

Great review! I just wish this was available in left handed dexterity

This turned out sick! Nice work

Dude I love my m1 martinez hammer, I do concrete forms, and gotta say it's been a hell of an improvement over the hammers I was rocking before, I was using 22 oz hammers from steel to fiber glass handles and the martinez to me has such a great handle, the weight of the hammer is no different then the heavy hammer I was using, my hits are harder and I love that nail puller on the side, and the hammer is way lighter then what I was using

I have this exact setup it's super light and u hardly.notice it's on sometimes u just notice how much work u just got done

I’m still trying to get used to the angle of the hammer’s face.

Love my m1 , have a waffle head , a smooth face and an m79. Much prefer my m1 to a tibone

Would have been nice to see some nails being pounded in. 8 mins in and I've watched you turn it over as much as an infomercial

get some boot oil on that before use! the cut edges of the leather soak up boot oil like a sponge.

Yeeees! Ive gone through two different Occidental pouches and i always cut that little upper pouch off and add a tape holder, i find it funny that the tape holders are always on the "cheap" belts and never on the more expensive ones

I literally have the same bags setup. Left side is a dream, right side has been a struggle for years. I’m running the stronghold shoulder straps and the belt less system and I love that. My issued is the nylon belt in the rear of the belt less system angles the hammer loop so it’s really annoying to get it in. I’ve tried other occidental bags and add ons on my right but nothing has ever been as good as my left. Anyways I’ve decided to order a diamondback right side pouch with their hammer holster and try that.

That pocket shield is for Chisels its perfect..

great detailed video, I saw u got a size 34" but what is your waste size?

Good build

How long did it take you to break in that buckeroo belt?

Can you fit paslode framing nails in the chisel protector or can they fit without the chisel protector ?

I'm looking at this exact belt , right now I have occidental fat lips with a full 3m 3 ring safety harness because I was post framing and production framing . .... now I'm doing remodels, and punch out type stuff. So I'm trying to ditch the harness for several reasons weight being one . ..... also swing a Martinez M1 .

Do u get vibration?

been thinking about this exact setup but with suspenders. Great review, may have sold me on it

I respect all of the work, insight, design, etc. I'm on my 3rd stiletto. My first had the same thing, the claw was fucked from chipping concrete. 2nd Ti-bone 2 because of the claw issue, after about 5 -6 years anyway. 3rd because I lost the 2nd during foundation work for months. A coworker ended up finding it, surprisingly. One thing not to do as an apprentice fyi, is grab your coworkers shit and just start smashing the claw on shit, or any tool really. I honestly didn't like the way the martinez is weighted. I like to keep my swinging hand basically on the very end of the hammer, unlike this video. There is no right way to do it, but I find I get a little extra power, with a lot less work than my last standard hammer, 28 oz estwing. to each their own. i'm not switching until retirement from the ti-bone 3. I might have to buy 3 or 4 more.. but it would be worth it.

Which model is this? Nice.

I am in Nigeria how can get the hammer

As a construction worker with a belly bigger bags work a lot better for me than the bags that are tight against the skin

It's true when you stated that nails just like to go in with this hammer. I love my M1.

Why are u out of breath jus moving ur hands about

I like mine. I use a 1 1/2 in chisel and it fits really well in the chisel protector. Kreg square bit fits perfect in the chisel holder as well. I just throw my utility knife in the front, pencil on the right. Havent found the left holder useful for anything so its open.

Really enjoyed your videos and im getting a few new ideas too. Just wondering what if any material do you put between the logos when final assembly? No matter how I cut my logs I keep getting a tiny gap between my logs.

Awesome video bro!!