Відео

Thank you, My big rock is working again..

Thank you

I have an issue with my remote/reciever: after 45m distance it disconects. Do you have an idea how to fix this?

What if that did not work

Awesome run Nick. Congrats mate

Perez Thomas White Eric Thomas Betty

Thank you

My wheels turn real slow like its struggling to go

2 - 3 S ?

On my esc it has a switch not a button

Found it 😊

Hi. I have one of these but my son has been messing with the idle screw and the high n low screw. How do I default these

Thank you🙏🙏

Thank you for this!😊 Just fitted the 4-channel replacement model to a 16mm scale steam locomotive model from '85 with a knackered 27MHz system (though the two, original servos are fine), and couldn't figure out where the power needed to go - saw yours fed in through Ch1, so shoved my power connector in Ch3, hoped for the best, and it works!🥳 Just need to re-jig so the regulator isn't half-open by default next, where this r/c has throttle+brake rather than just throttle like the old system.🤔 Switched on, bound the transmitter, and it automatically centred the throttle servo. Can't have everything go to plan, eh?!😅 Thank you again.

How'd you remove the pinion?

What about binding servo?

Hasnt worked my sons car is making a weird noise when i press forward not moving though, anyone and ideas please

My instead of flashing, it just goes solid green but i still dont get no throttle respond

Thanks. Clear explanation. UA-cam is better than reading my manual. 😂

Where can i find the adapter for the charger

Why is my steering and throttle reversed, I have to switch the buttons on the transmitter to reverse on both. Any help appreciated.

Any chance in some help on how to fit a bigger motor ?

Thank you . Your video helped

By the way im upgrading my TRX 4 defender 1/10

Hi thank you for this video but im having problem if you can help me i did as you but the first stage where i dont connect the esc to the receiver and i start the esc then i press the set button the motor turns one way then after few seconds stoos but it doesn't go the other direction and the green light stays green and the second stage its not doing what it should can you or anyone had the same problem can help advice me

So if the lipo battery is full do I put it on decharge or storage mode

Thanks very much. Very clear instructions. My Grasshopper has been doing a few odd things since swapping from the tble 02s so I think calibration is in order.

Hmmmmmm I’d like a peek into this…

After it flashes once it doesn’t flash again

Outstanding cheers mate

Hitek charger just rebranded sky rc

Never blinks 5 second blink and turns off

You legend. Thanks so much.

Would this setup be good for a traxxas stampede?

Whats the name of the things that srparate your cables on the motor

hi there could you tell me if you did anything about the pillow ball slop in this car? quite a bit in mine im not happy about

How to set EPA with this radio?

Is that just stock gearing? Just bigger esc and motor?

Does this calibrate the TSM automatically too?

Thanks🎉

Thank you so much, for us illiterate newbies who can’t read instructions 😂..this video is much appreciated! 🙏🍻

Thanks you so much

Cheers bro 😎 It works perfectly 😎😎😎😎

what electronics and components do you have there to reach that speed?

I nic się nie spaliło, przecież on jest do 4S...

Can you set cut off voltage

Can it discharge aswell

YOU SAVED A HORNETS LIFE... 😂 THANKYOU BROTHER

I have the bugsta which is the same internals as the carnage from what I've been told, took it apart as the wheels won't spin, and you can see only half of the gear is touching the spur, it's like the gear is in backwards as it won't align right, second time had this issue. Is the gear meant to line up exact to the spur? Except mine is now chewed up. Thank you.

Really thought i was going to have to send my RC back and you were my saviour! Thank you sir! 🙏