Відео

Learning experience 😂 your right

It would make a clunking noise going over bumps

Also a cracking noises when turning steering wheel

Thanks

What sensor ? I’m not familiar

Nope , I just noticed gas leaking like in the video

I replaced the whole assembly

With oem and it took me less than 1hr , plus the hose was deteriorating

Nice bro

Most likely similar

@@Gm29_mtzthanks for the reply

No problem, if u have any more questions lmk

@@Gm29_mtz one more lol did you use oem or aftermarket? Is there a difference

I used aftermarket from rockauto , they felt the same as oem , I was running coilovers and just wanted the stock look again

average g37 owner

You prolly need your coil packs replaced

Thanks

No misfire but my symptoms - low power - gas leaking

No I didn’t

@@Gm29_mtz i have stock exhaust. I just want to tighten to check torque for upper bolts of the engine mounts. May i know which swivel adapter is required?

@@Qkfltpdls777 i didnt use a swivel attachment, just a bunch of extensions

@@Gm29_mtz do you have stock exhaust with stock headers? I wasn’t able to reach to upper bolt ..

@@Qkfltpdls777 yes stock

I got fog lights installed and wired , bought them from eBay for 25

Alignment shop

I thinks they are different

You may be on to some , I wouldn’t know 100% but ik that the wheels bearings are interchangeable, so maybe control arms are Interchangeable

Did u get it fixed?

@@Gm29_mtz yea it starts now

They didn’t fit with the bumper

What does that do? I’m not too informed

No problem , glad the video was helpful

Cut off the hose

Shoulda be similar

Maybe, if u remove the fuses

It’s the same just different part number

Yo le puse 6 litros

Yea they can be annoying

I think it’s different

Could be your CV axle

Cpuld be your tire too

@@dronesharassingus8564 no not my tire prolly is my cv axle

@@CuervoP cv axle shake only when accelerating, when forcing the piece but when letting gass of dont really shake bro

@@CuervoP but cv axles are cheap like 80 per piece aftermarket too

They suck too.I switched back to shocks from rockauto

I’m having sort of the same problem here. Sluggish acceleration, usually have to press it from the top of the pedal to get to go somewhat, When the tank is less than half full it risks itself shutting off. However I’m also getting a p0430 code which is a bad cat code. But I’m hoping this is just a leak, and not a full cat replacement. Or it may also have to do with the fuel pump since it is running pretty lean. I have a 2013 g37x and I’m getting 21 mpg with city driving, but the car feels really sluggish and hard power steering as well

It sounds like a fuel or air problem your having , spark plus or fuel pump?

@@Gm29_mtz Im thinking the same, I ordered a fuel pump in so we will see.

@@Gm29_mtz Yeah, pretty sure it’s fuel pump as well. Sigh this is a $400+oem part or 300 from a quality aftermarket. Fuel pump shuts off once it’s is dry, and not submerged in gas anymore hence the stalling at half a tank, once that is fixed I hope that p430 goes away.

@@adanlopez1011 I purchased mine from autozone and it’s 2 been yrs holding so far

Infiniti parts deal or z1 motor sport

Contact z1 customer support they will help out within same day

40262-EG010 is the part number for the nut

Yes

@@Gm29_mtzur amazing im bouta do this all the other videos looked so confusing

Thanks No problem

Nissan parts deal

Es igual

Yes, with a g37 sedan 10-13 bumper u can install after market headlights

@@Gm29_mtz no need to buy different fenders right? they fit my 08 fenders?

Nope , you can use the ones you have on

@@Gm29_mtz omg thank you so much I was wondering the exact same thing you just saved me a lot of money

@@jackcable1028 no problem

No sound , just wanting to replace old lower control arm , if u have noise check your CV axles

Push the tabs in , and slide up

From the website Infiniti Parts Deals

It did have Poor acceleration, it for sure restored some power after installing

Gm__mtz

Thanks

Have you inspected your CV axles? They could be the ones making clunking noise

Yea it’s a 30 min job with the right tools

14mm if i remember

@Gil_mtz and how long bro, appreciate btw.

Alignment shop

@@Gm29_mtzWhat’s the way u said u did it urself?

@@alexandergonzalez333 I messed with the tie rod alignment but for the camber alignment I took it to the shop , with adjustable control arms you can prolly do it yourself without a shop

It’s been a while I don’t remember tbh , but are u getting the noise at idle?

@@Gm29_mtz yes, after the car is warmed up, and then you shut it off and restart it a half an hour later I’ll hear a knocking sound on the passenger side. It has something to do with the system when I pop the hood and go to the purge solenoid and squeeze the hose between the solenoid and the intake the pulsating stops.

Yea it’s better off to replace it , u may have a leak , after I replaced mine I noticed a difference in power aswell,

It snaps back on when you press on to the hose

@@Gm29_mtz thanks, it took me hours to do it but your video helped me I’m not a mechanic