Відео

Good tip about the little piece in at the side to make it snug, thankyou.

Great step by step. Here is a tip for step 8 (cowling removal): Rather than prying out the very tight fitting cowling, which risks bending the metal, and then having difficulty putting it back into place by prying again, one can get ample clearance by removing the 19 mm nut at the bottom of the steering rod where the gear meets the steering spindle. This allows one to pull the steering rod up within the plastic bushing to give you an inch of clearance and makes the removal and replacement much easier. And it is much easier to remove that bottom nut to get the clearance rather than trying to pull the steering wheel to get the cowling clearance.

Vitamin C (ascorbic acid) in vegetables begins to denature at temperatures as low as 86°F (30°C), and is most destroyed at temperatures between 85-95°C (185-205°F). Air dry moringa with minimum light possible preserves the sensitive vitamins. Clay containers or with cotton cloth absorbs moisture while preventing from catching any air pollutants.

I just dry it to an open air. Thanks for sharing..regards from 🇵🇭

Someone buy that woman a power drill with a Phillips tip.

Wonderful explanation ❤❤❤❤ Thank you so much been looking for this for a while now

Great instructional video. I appreciate you showing us how to do it without disconnecting all the electrics. I just have one suggestion for your method. Instead of prying the upper portion of the cowling up to remove the lower portion, I just removed the steering wheel. My mower has a cover in the middle of the steering wheel that is held on by three tabs that can be compressed with your fingers from underneath the steering wheel hub. Then, the nut holding the steering wheel in place can be removed. This allows the upper portion of the cowling to be lifted easily out of the way. It also provides an opportunity to install a nylon bushing around the steering column's top end to remove any wobble you might have. I used one from a steering gear replacement kit. Everything goes back together much more easily, too. I also figured out what the zip tie is for if you don't have that in part 2. I cut the one securing the seat deadman's switch wiring off and didn't have to disconnect it to move the seat out of the way. When I was done, I used the supplied zip tie to secure the wiring.

Two bolts, pried up the rear and out and in in less than 20 minutes.

Wonderful explanation

it is advisable to dry herbs below 70 deg Fahrenheits to retain most of its nutrients and essential oils..

the whole thing looks so gross!

I’ve looked at several videos and yours is by far the best step by step instructions and easiest to follow. Thanks for sharing.

Outstanding!!

What is it?

OMG! No need to go through all that! Just remove the rear bolts from the springs. Lift up the back end and remove the tank. Saves you a ton of time.

This video helped. Thank you!

I’m not being a ass but please AllWAYS remove neg cable first, it’s the safe way and no shorting out

Thank You’ll for information and advice

How long is the powder good for once you make it into a powder? And should we refrigerate?

Great video, nice job. One tip, remove the steering wheel before removing the cowling, raise the dash portion, and secure it up and out of the way with a visegrip on the steering shaft. Also, always, always disconnect the negative battery cable first. That way there is no chance of sparks flying should your wrench happen to touch any metal part of the tractor. Installation is reverse, positive first, negative last. Happy wrenching.

ua-cam.com/video/jmW8a99MVeY/v-deo.html

Thank you! This was a big help!

Go Hubby for being an amazing assistant! You are both great!!!! 🙂

YOU GO GIRL!!!!! So happy to see that I am not the only woman out there who does things like this!!! PLUS you didn't bend the body trying to save some time AND used your own hands rather than power tools! 🙂 I am currently doing this on my L120 and last night realized that I don't remember where 2 of the screws go.... 😕 🤔😣 So I came back to a video I was using and found yours! (in my defense our family has had a violent stomach bug so I had to stop once I got it all removed and was MIA for 2 days)

The snap is therapeutic.

Thanks! I followed your steps and got mine replaced in about an hour.

Could you put it in a normal oven?

I think we'll lose most of the nutrients by the heat.

Our LA115 has the same problem. So, if I remove the steering wheel, I still need to remove the 6 screws holding the cowling sections together?

I think the vinegar just kill everything that was fermented

Thank you for the step-by-step procedure. I'll have to try that !

using battery powered or air tools would cut the time down considerably, just saying. great video thanks..

Great video. My local John Deere is charging me $540 for everything plus a two week waiting time. The tank costs $198. Thanks.

Is the replacement tank part number GY21876? I want to make sure I get the right part for our LA115.

Cooked the healthy right out of them. No thank you. And for that reason, I'm out.

I watched the first "3" videos prior to this one, from farmers to lawnmower repair shops, but I gotta say... this lady has got them all beat! "Props ma'am for that set of skilled hands"! If I had listened to the 3 previous guys, I'd be working on it until something broke. I knew it was easier than portrayed. GREAT JOB MA'AM... 💪🏼😍👍🏼 " ZERO POWER TOOLS" all manual. .. kudos!! & Much respect.

Would you know how long it last when dehydrated? And would recommend keeping in fridge? Thanks ahead of time.

95 degrees f or c?

moringa seeds for sale 50 seeds for $6.50 from europe

thank you very much for that video that was very helpful

Thank you very much for making this video to showing me how to take the gas tank off i appreciate it very much thanks again

Good lord, you must work for John Deere. First off , buy a battery. Screw gun. Lady, unscrew the two spring bolts in the back and lift the body up.5 min. Instead of all the screwing around with all the bolts and screws. It’s a 10 minute job. Just saying did mine last night. Easy Peary. Pay by the hour, good luck

Can air fryer can be used to dry moringa leaves or any vegetables? Nutrients still the same?

Where can i buy one of these

You are my hero! I bought a LA145 last summer. Had issues. Watched 1000 videos, replaced spindle (which I had never even heard of!) Replaced belts, installed new battery, etc.) Basically I was bound & determined to do it my stubborn self. I'm a 58 yr old single woman, raising grandkids, work 3rd shift & moved out to the country. Because I dang wanted to. UA-cam videos have given me a new lease on life. Yours, my dear, is by far the best I've watched on this blessed JD lawn mower!! Thank you! Keep it up. Love garden projects also. (Planted potatoes yesterday straw! Ha! Who knew? We'll see how that goes!) Love from Alabama

How much temperature need for that?

Hi do you send out leaves to people after you dry them??😎

Safety Tip: ALWAYS remove the negative first (Not the Positive) when disconnecting battery for any application. When reconnecting, reverse the order.

Very good. Thanks.

The instructions that came with the part from John Deere were incomplete. So were some of the other UA-cam videos. However, this video was very comprehensive and helped me get the job done! The only additional step I did was to remove the steering wheel to make the cowling easier to remove. Great video. Very detailed!