Відео

hi was wondering , how do I go about testing back flows with the city, do I have to register with the city? I recently got my certificate I was wondering how do I go about it?

Thanks for this video. You have explained it well. 👍

I just use a comically large wooden stick from Home Depot I got laying around and force it to move

I know this is OLD, but hoping someone still peeks at this video from time to time!? We have a Moen GXP50C. The blades do NOT do a full 360, as there are… parts in the way that stop them from making a full circle - bumps in the metal (idk how to explain what they look like?!) as well as 2 bump things on either side of what holds the dang thing together) How does one in-jam MY type of Moen? I am FRUSTRATED! 🫠

What else can I do if that middle part won’t unscrew for me! Help

Although I didn’t have either tool to try and fix mine, it gave me a good point of reference, I started with a 9 mm wrench for the bottom tried twisting that didn’t work, so then I went in with a butter, knife and scraped around the edges just to find a piece of glass jammed in mine, which went down after I tapped it. So this might help as well.

Although I didn’t have either tool to try and fix mine, it gave me a good point of reference, I started with a 9 mm wrench for the bottom tried twisting that didn’t work, so then I went in with a butter, knife and scraped around the edges just to find a piece of glass jammed in mine, which went down after I tapped it. So this might help as well.

Thank you for the tip, I was getting really frustrated that it wasn't unscrewing by hand. Also, when I got mine open it had a square screw head instead of a flat head.

Hey good video we are getting a halo system soon. The ppm rating on our water ranges from 400-800, will this type of system get that number down below 50? Any idea? Thank you

Rolfson Tunnel

Rodriguez Michael Jones Laura Smith Susan

THANK YOU! I found this tool for $8.39 on Amazon and IT WORKED!!!! 🎉❤

Sonny Burgs

624 Stokes Pines

4777 Tremblay Wells

Thank you so much! It was very clear and it helped me a lot 😊

Brown Eric Robinson Steven Harris Laura

Thanks bro, that was helpful 😃

I used two flathead screwdrivers behind the impellers and got it to turn. Depending on the condition this may work in place of that ridiculous turning tool...

Thank youuuu!!! ❤❤❤

Perfect! Fixed my garbage disposal myself for $6! They sell that basin wrench at harbor freight

What an idiotic design. Trying to use a screwdriver. Power is off

After 2nd Jam, bought tool on Amazon for under $10 and worked great. Thank you for quick version of how to fix.

Thanks. Will never buy Moen again.

Thank you so much! Your video helped me!

question: there is a hos above the drain hose. Where does it go? in out kitchen, that top hose connects to the dishwasher as dishwasher drain. Of late water has been going from the garbage disposer through that top hose to the dishwasher. What could be the problem?

Try cleaning with baking soda and distilled white vinegar first: So my Moen garbage disposal was jammed up pretty bad. I usually use a small pry bar and push against one of the chopper blades to get it freed up. This time it not want to free up at all with a pry bar at all. I tried a method of cleaning garbage disposals using baking soda and distilled white vinegar. I don't usually measure it out but I dumped around 1/3 cup baking soda and then dumped in 1 cup distilled white vinegar. I let is sit for a minute while I went and got my pry bar. I came back and tried to move it and it was freed up like it was not jammed at all. If this didn't work I was going to have to replace it.

Such a poor design - I replaced my old insinkerator of about 15 years and once in a while it got jammed but just used the allen wrench to work it free. Now, I had to take a wooden spoon and move the blades around which eventually worked but again, a poor design IMO.

thank you sir, that worked for me

I’m gonna get a a new one so far it looks like motor is just burnt out and nothing is working

Thanks bro for the video Those moens are stupid lol

UGH!!! If we knew that it would be this difficult to do this when needed, we wouldn't have gotten this model, Our old one had a place underneath where you just insert an Allen wrench and then turn. This is such a retarded design!!!

Didn’t need this tool at all. I unplugged it to make sure the power was off, put a glove on, stuck my hand down there, rotated it with my fingers, unclogged it and it worked.

Came looking for an instruction video....before thinking to do this I unscrewed my drain plug and the top came off, mechanism is not showing. no idea how to get to the mechanism to unscrew it?

I just fixed mine with a big flathead

You don’t need that fancy tool all you need to do is use a screwdriver

This is exactly what I needed. When I showed the Moen wrench to Lowe's staff, they said they didn't have it in stock. They sold me the Allen wrench tool. Well, now I found it there's not an Allen screw at the bottom! 🤬

Video w/screwdriver rather than ordering Moen tool: ua-cam.com/video/zgeQm1UGG_k/v-deo.htmlfeature=shared

Thank you for the video and tips!

this is exactly why i never drink water straight from the tap always filtered

Gracias

I turned the circuit breaker back on. I got my phones flash light and kitchen scissors while the machine was off. Took what I saw that was jammed out. Put the red button back in, and wallah. It works, thank you! 😉

Page 17 is not clear as to your last step. Thank you for clarifying, to toggle up when finished.

This is just a money grab

Just use a long flat head screwdriver that’s what I did 😂

I stuck a prybar/nail puller in there and twisted it ! Worked great ! Thank you for the video I didn’t know these things got jammed honestly

I used a wooden spoon handle. Worked like a charm!! Thank you

You just saved me $160. But as far a that special tool, i just stuck some metal tongs and turned clockwise. It worked!!

Thank you so very much!! Our Moen Garbage Disposal was less than 2 years old in our vacation home in Florida. The darn thing was jammed, we heard the hum of the motor, hit the reset button, nothing...we saw your video. Ordered the part on Amazon...a day later the tool you showed arrived, we used it, after we unplugged it and removed the rubber gasket at the opening and the disposal is working perfect...thank you. We did have to hit the reset button again after using the tool. You saved us a service call, perhaps even purchasing a new disposal, now we have a tool for the future, if this happens again, and we can share with our neighbors who might have the same type of disposal. This should be given with the purchase of the disposal. Again, thanks!!

Thank you ! Was able to get it fixed easily !