Відео

Needed to paint the complete trailer to call it a restore. Other than that it looks good

what kind of screws did you use

Biden dollars

How do you deal with the title situations? Float or register?

How do you deal with the title situations? Float or register?

Why do all that work and sell it cheap 3000$ or 2800$ no lower you shot yourself on this flip

Just watched this video trailer and bits cost $1932.00 plus labour $567.97 total $2499.97 sold for $2500 no profit there deaf money 😳

Not a big deal, but you didn't use a pick axe. That was a grub hoe and probably a better choice.

It's worth more and so is your time, don't undervalue your knowledge and skill

Kentucky gang 🐎

Nice!!

is there any legal stuff you have to do since you are working on a trailer? Does it need inspected or reregistered?

Damn that welding shop is extremely affordable where you are at for all that work the welders here would have charged me 200$

Why would you inspire your competition by creating this video ? If it’s a good thing, keep it to yourself as long as you can knucklehead.

And if it’s posible the large

Hi my friend! I wanna ask you the measure between de fenders? I really hope that you can help me with this information and I would appreciate it very much. Thank you, greetings 🫡

Do you need any license or permits to sell trailers?

Hey dude great video! Any updated tips or tricks you’ve learned to make it any easier or faster overall ? Just got a 5.5x10 ft landscape trailer that i want to refurbish and bring back to life!

Strongly encourage you to charge more for this level of quality, the profit should double the initial cost, so you can start the next project without having to dip into your savings.

I would have replaced every single board. They all look bad.

The guy who boughg it for 2300 got a better deal than you for 1600

I think it would be better to just buy all new board as long as the old board looks old and then charge double the amount the wood cost

Tuui49u48i489r88ri8944

Great job, enjoy your videos. I subscribe. How many angel grinder disk did you use ?

I love the cost breakdown and profit breakdown at the end. Good to know that it wouldn't be worth my time if I was doing it to make money, but I'm in the process of doing this with a trailer I own, so it was fun to watch 🤘🏼

Si 👍

Si es que 😦 es lo mismo pero bueno

I have a trailer that I need you to repair for me like that. How much would you charge me? I’m in Miami Florida.

1) good job working hard 2) you worked way too hard for such a small profit. I find it hard to believe you only had 13 hours in it. Finding it, driving to/from; fuel, time listing it, time talking to future buyers, time going to/from store. I don’t think you fully calculated. But I could be wrong.

Vey sloppy job as long as you’re taking time to dismantle why not paint all in its entirety

P r o m o S M 💕

It may be minute but, I feel like a $300 winch added to that would have increased the price to $3000/3250 for the trailer. Could have added more profit...

Did you repack the wheel bearings?

Ánd what about chassis? Why not paint With body chassis black 😮. And all wheels are nice and spare wheel rusty😢 nonono

Dam that looks so good

Did you have to rip a 2x8? My trailer has 10 7" boards and I'm wondering if they just shrunk from the 7 1/2 nominal dimension. I am rolling mine too! Way faster, thicker coats and it's a trailer, not building a watch or painting a show car. lol

Heavy equipment mechanic here as well as former tuck/trailer mechanic. Just some tips. The heatshrink solder connection needs more heat. The little solder ring in the middle needs to melt completely to be properly installed. You will think you are going to melt the heatshrink for how much heat it takes but as long as you aren't using direct flame you should be fine. That ring should look like a sliver blob or almost fully distributed through the strands is even better. This next one may or may not be useful anymore because last time I re-decked a small trailer like this was right when lumber was stupid high in price a few years ago. But I had some random guy in the parking lot at the hardware store recommend aluminum boat dock planks for re-decking small trailers. I took his advice and picked some up from one of the local metal supply stores. It was maybe a couple hundred more than wood to buy 4 24 foot planks to install on a 16' trailer. We had the planks cut into 4 16' planks with 4 8' planks we used in the middle, end to end. Ended up only having about 4" of waste, and a deck that should last longer than the trailer, as long as it isn't beat on to badly. The aluminum more than paid for itself considering that trailer is on its third deck. The stuff will hold some weight as well. Which was my biggest concern. I needed to move a 7K lb skid steer about 25 mi and I had no other trailer available. The skid steer also had a mechanical issue that caused it to jerk around almost uncontrollably which made it bounce around on the seriously over loaded trailer. I figured I had ruined the deck after that beating. Got the skid steer off a couple days later and the deck looked as if nothing had ever been loaded on it. I was seriously impressed with those planks. One last thing to add. I has some small cheap LED cube lights that I wired into the backup light circuit of the 7 way plug. You used to not be able to see a thing while backing up at night. Its not a problem anymore. I did all my trailers that way now, and for only about $20-$30 for lights and wiring.

Great video i just picked up a 18ft trailer. I'd like to do what you did. What kind of welding product you used and what brand degreser?

Spray paint lasts a couple of months in our climate. I've started just brushing rust inhibiting paint on with a paint brush. The lines left by the paint brush disappear and it leaves a pretty thick coat. Neither method has the UV stabilizers or hardener of automotive or industrial paint.

Looks good brotha! Pros and cons of rolling the paint instead of using spray gun?

You should invest in the Bauer surface condition tool save you a lot of time instead of using the grinder to remove rust and paint

Hahaha😂 throw some paint at it got me awesome bideo

Why not remove the spare tire and paint behind that?

You should look into a Harbor Fright BAUER 9 Amp Surface Conditioning Tool. That thing will make quick work on cleaning off rust . Also look at the MCGRAW Air Needle Scaler they have, it is great for the tight areas along with getting the rust out of the corners. By the way I do the same thing in Georgia that you are doing. I enjoy it. Keep up the good work.

She is tough!

Remember everyone, a grinder and paint makes you the Welder you ain't.

What about title?

Man I hope I can find one of these flips from you one day

Great job sir. I agree with some of the others. I expected this trailer to sell for more. Adding the red and white reflective stickers would add a nice touch to your already stellar work. Thanks for the video.

why paint over rust?