Відео

How do you change the level of the horizontal line?

thanks :)

So what did you use to paint the smooth stucco? Had it previously been painted or did you paint over the color coat?

So many things are done wrong here, I don't even know where to start. Lol

How do you get the base off? Nobody is showing that part.

"Should fix it"/ But DID it fix it?

My LG dishwasher has the same code. We have replaced the motor on it twice! and it still happens. The dishwasher will run its full cycle and at the last one minute mark the code pops up any help would be appreciated.

FatMax is Made in U.S.A..Obviously Stanley is choosing American jobs over the profit they could make by having them built overseas. That’s worth a lot to me. Especially since I like the FatMax as much as anything else anyway. Easy Choice.

I ammm sory im fall my boos not tich me

Couldn’t use a pencil and paper?

Kids nowadays when they go outside

You’ve got to be kidding me. That’s a cheap cover up. That’s not how you repair cracks in stucco 🤣

good video, but showing how to disassemble the dishwasher from start would be nice

Maybe if your meter is 50+ years old lmao they don’t even look like this anymore in my he majority of cities lmao

I've been waiting ALL day for mine to be turned on. One more hour, and they are done for the day, although it is scheduled to be cut on today. I'll wait that hour. But after that, arrest me if u want, but im taking a hot bath and drying my damn clothes. I'll cut it back off for em to come the next day. Zero fucks given rn. Thanks for the video!

I drilled a 1/2 inch hole… RO systems do not come with standard faucets. They are quite small.

That is what you get with bloody American wooden shacks 🤣🤣😂😂👎👎 bellends

My girlfriend my girl's mom lives in Idaho and they charged her $3,000 for the same fix yo

Everything in this video is wrong. Sorry to say. you should never use metal lath in the shower pan, it can cause holes in the hot mop bed, also you shouldn't use stucco. Stucco will crack over time and cause leaks if the grout gets exposed. Also, your hardibacker should not be in the pan. you should leave about 6 inches and no screws on the curb. Other than that everything looks good.

I put water in my tray to start, cuts down on the dust.

If you’re gonna teach us how to commit a federal offense you can at least show us how to do a proper clock test after

So the cement board doesn’t go all the way down

Milwaukee is so curved, that's why it has such a standout, but in general I think it is a minus, because if the tape is way too curved, it is uncomfortable to use, also that hole underneath will get the dust in and the tape will stop retracting sooner.

You showed NOTHING about applying it.

How do you know what size drill bit to use?

That’s really cool make more videos 👍🏼

awesome!! i was looking for something like this since i dont have any tools!! perfect!! thank you!

The mikwaukee looks like it's sagging down further than the fatmax, even when it's only extended the same distance as the fatmax at around 11 ft. I could be wrong, but if that's true then I'd say the fatmax has a more useful standout, even if not as far on the tape

if i knew this 2 hours ago 😭😭

What happened to verbal guidance??? Did you switch drill bits to get through the stainless sink, plywood or both??? 5 minutes and 29 seconds of wasted time :(

Thanks much, this worked for me! Mine did have the plastic cover, but from the side there was an opening just large enough for me to access that part and the associated switch. I did have to use my offset screwdriver which was a pain but sure beat trying to remove that cover.

De makita dbn 600 is garbage, mine doesn’t work upside down, it’junk

Helped me a lot didn’t have a clue on wh

You're using my good trowel

My dude, skimming the top with a 2x4 is called screeding. I definitely recommend covering as much as comfortably possible, particularly the arms and legs as well. Concrete burns are no joke.

You’re supposed to have the metal part going up and down not side to side.

Thanks phor your video! It helped me complete my project!

Superior tool sells them on Amazon for about $22.00

Why didn't you mention the plunger that you have to pull out of you're turning the gad on

I have know this back in the seventy when you could use a 6" folding ruler and all you had to was just turn it over same with a eight ' in the 980's up to 1996

Did you do anything special to align the star pattern? When I put the cam on my new motor, it was not lined up the right way. So I used the cam to turn the inner piece to match up and then put it on the motor. However, the nE code remains.

Thank you kindly!! This is so helpful.

How is this shower now?

I use a Gatorade bottle to add water with one hand while mixing.

For those that have the big black plastic cover on the bottom, turn the dishwasher completely upside down and on the back there should be two Philips head screws that are inline horizontally, remove these. There may be a third screw that is offset, don't remove this one, it holds an internal component in place (ask me how I know). On the front, there's a spring mechanism on each side to assist with the door raising/lowering, unhook these (do not disassemble the spring mechanism itself). Remove the screw that holds the access panel on the bottom of the dishwasher and remove the panel itself. With all of the above removed, wiggle/pull the black cover straight up. It should release and create enough room to access the diverter motor (it won't come completely off). To reassemble, just reverse the order of the preceding steps. As others have mentioned, I found it worthwhile to change the seal and the microswitch while I was in there. I hope this helps!

Hey there, are you running your drill motor fast or slow?

At 9:11 he sets up some mockery from one of his work buddies and it takes them 3 seconds to pounce on it.

I just did my house, I installed everything in stainless steel pipe 316 it will never rust it’s for life. I welded all d seems it came out good.

Hi everyone! I had the same problem years ago and followed this video, replacing that part. It worked. Now it happened again, replaced it again but now it didn't work. Smart diagnosis says "Nozzle" is the problem. "Defect on the Vario motor driving unit". Please help me with this problem.

I own... Luftkin is okay tape large numbers and light weight Luftkin nite eyes has flat black blade with neon green large numbers is heavy and flimsy blade Stanley fat Max auto lock i keep at my miter saw Bought milwuakee stud while bulky has stiff blade and large numbers. As i was building a deck had my head somewhere drove marking stake into the blade it still works just fine A customer gave me a dewalt will only collect dust