- 95
- 161 762
Cafe Ex Machina, Kokkola
Finland
Приєднався 14 тра 2016
Garage fun with motorcycles and restoration projects
Road Bike -project, part VII: How do I brazing a bicycle frame with bronze?
In this episode, we will complete the brazing of the main triangle using bronze. The brazing process proceeds in stages:
1. first, the seat tube is brazed to the bottom bracket shell,
2. then the main triangle is tacked together,
3. the frame is removed from the jig, and
4. finally, the frame is brazed completely.
For flux, I use Cycle Design LFB flux paste (USA). For brazing rod, I use SIF Bronze No 101 wire (3.0 mm).
#bicycle #framebuilding #oxyacetylene #bronze #soldering #brazing
Affiliate Links:
BIKE App Computer
apps.apple.com/us/app/bike-app-computer/id6578420212
Bike App Computer provides a clear black-and-white dashboard interface displaying speed, direction, altitude, and odometer. The super simple interface offers two colour themes: Black/White and White/Black. The app allows you to record your route, which is saved on your phone. You can review your route after the ride is complete. This app has no adverts, paywalls, or additional features, so you can just ride!
1. first, the seat tube is brazed to the bottom bracket shell,
2. then the main triangle is tacked together,
3. the frame is removed from the jig, and
4. finally, the frame is brazed completely.
For flux, I use Cycle Design LFB flux paste (USA). For brazing rod, I use SIF Bronze No 101 wire (3.0 mm).
#bicycle #framebuilding #oxyacetylene #bronze #soldering #brazing
Affiliate Links:
BIKE App Computer
apps.apple.com/us/app/bike-app-computer/id6578420212
Bike App Computer provides a clear black-and-white dashboard interface displaying speed, direction, altitude, and odometer. The super simple interface offers two colour themes: Black/White and White/Black. The app allows you to record your route, which is saved on your phone. You can review your route after the ride is complete. This app has no adverts, paywalls, or additional features, so you can just ride!
Переглядів: 8
Відео
Road Bike -project, part VI: How to silver solder small parts to the frame tubes.
Переглядів 50814 днів тому
This part, i will silver solder the water bottle cage screw heads to the frame tube. I will use Stella AG1 100 g flux paste, which makes silver soldering parts easy. For silver, I will use SIF Silver Solder No. 39, 1.5mm wire. #bicycle #framebuilding #oxyacetylene #silver #soldering #brazing Affiliate Links: BIKE App Computer apps.apple.com/us/app/bike-app-computer/id6578420212 Bike App Compute...
Road Bike -project, part V: How fast do you finish filing the tube?
Переглядів 9621 день тому
A friend asked, how quickly can you finish filing the seat tube? A simple shape can be filed very quickly. In this video, we time how quickly the filing is done and make holes in the seat tube for a water bottle. #framebuilding Affiliate Links: BIKE App Computer apps.apple.com/us/app/bike-app-computer/id6578420212 Bike App Computer provides a clear black-and-white dashboard interface displaying...
DIY Oxy Acetylene Gas Cylinder Trolley
Переглядів 49Місяць тому
I need a cylinder trolley for new oxygen-acetylene bottles, but they are not available for sale in the nearby areas. Therefore, I thought of buying a regular hand truck and modifying it into a cylinder trolley. #DIY #oxyacetylene #trolley Affiliate Links: BIKE App Computer apps.apple.com/us/app/bike-app-computer/id6578420212 Bike App Computer provides a clear black-and-white dashboard interface...
Road Bike -project, part IV: How to make a bicycle top tube?
Переглядів 6Місяць тому
The preparation of the top tube is the easiest part of the bicycle project. The blank used is a Dedacciai MTO286B301 tube, and it is filed to fit between the head tube and the seat tube. Filing this tube to completion takes about an hour, with most of the time spent finishing the tube in the jig. #framebuilding Affiliate Links: BIKE App Computer apps.apple.com/us/app/bike-app-computer/id6578420...
Road Bike -project, part III: How to reaming a bicycle head tube?
Переглядів 36Місяць тому
To make a bicycle head tube, you need a head tube reamer, a hacksaw, and a head tube blank. I have a Columbus Zona 36 mm head tube (CYRK18600) from which I will make the head tube. The head tube length is specified as 117 mm in the drawing, but it shortens during reaming, so it's advisable to make it 2 mm longer. #framebuilding Affiliate Links: BIKE App Computer apps.apple.com/us/app/bike-app-c...
Road Bike -project, part II: How to notch tubes with just a file?
Переглядів 4942 місяці тому
The BikeCAD application has a new feature that allows for the creation of mitre templates. The mitre template can be printed on paper and used to mark the shape on the tube. In this video, I am testing this new method! #framebuilding Affiliate Links: BIKE App Computer apps.apple.com/us/app/bike-app-computer/id6578420212 Bike App Computer provides a clear black-and-white dashboard interface disp...
Road Bike -project, part I: how to make a bicycle jig?
Переглядів 9352 місяці тому
I have built two bicycles over the past couple of years: one fatbike and one road bike. This time, I'm attempting to create a video series about building a new bike. Here is the first part: how to make a bicycle jig. #framebuilding #roadbike Affiliate Links: BIKE App Computer apps.apple.com/us/app/bike-app-computer/id6578420212 Bike App Computer provides a clear black-and-white dashboard interf...
Shimano 105 Dual Control Lever, installation of a new brake cable.
Переглядів 3273 місяці тому
I have been building a new racing bike frame for my son over the winter. Most parts have been purchased used, except for the rims and bearings, but I'm replacing all the cables with new ones. In this video, we're changing the front brake cable. Affiliate Links: BIKE App Computer apps.apple.com/us/app/bike-app-computer/id6578420212 Bike App Computer provides a clear black-and-white dashboard int...
DeVilbiss GFG-513 spray gun complete disassembly, rebuild and restoration
Переглядів 2384 місяці тому
I bought this spray gun in 1990 and painted 10-20 cars with it. Since then, it had been lost until now, when it was found among scraps at my mother's place. This DeVilbiss is completely seized up and clogged. This model, GFG-513, is no longer in production, so it must be disassembled carefully without breaking anything. Affiliate Links: BIKE App Computer apps.apple.com/us/app/bike-app-computer/...
How to use Albee gas bottles?
Переглядів 1135 місяців тому
I have used Albee argon gas for TIG welding. Here is a brief introduction to Albee gas cylinders. Affiliate Links: BIKE App Computer apps.apple.com/us/app/bike-app-computer/id6578420212 Bike App Computer provides a clear black-and-white dashboard interface displaying speed, direction, altitude, and odometer. The super simple interface offers two colour themes: Black/White and White/Black. The a...
Let's modify a cheap Stahlwerk TIG welding machine and take the purge gas directly from the welder!
Переглядів 276 місяців тому
I own a fairly basic welding machine. Many have suggested that when welding frame tubes, it's important to also consider the inner seam to prevent oxidation. My Stahlwerk welder is quite affordable, so I'm not concerned about voiding the warranty. Therefore, I plan to disassemble it and modify it to get the root gas directly from the machine. #learningbydoing #learningfrommistakes Affiliate Lin...
First welding job! Stand for a bench grinder!
Переглядів 1,5 тис.6 місяців тому
I've been learning TIG welding for a while now, and it's time to do something real thing. The plan is to build a stand for the bench grinder. The result may not be the most exquisite, but it should serve its purpose. #learningbydoing #learningfrommistakes Affiliate Links: BIKE App Computer apps.apple.com/us/app/bike-app-computer/id6578420212 Bike App Computer provides a clear black-and-white da...
TIG welding studies, exercises, and practical training
Переглядів 5017 місяців тому
The most difficult thing for me is controlling a welding torch. The problems are height, accuracy and speed. This can also be practiced without welding. I got the idea for this from Mister TIG: ua-cam.com/video/DuIoihbLPDw/v-deo.html&ab_channel=Weld.com #learningbydoing #learningfrommistakes Affiliate Links: BIKE App Computer apps.apple.com/us/app/bike-app-computer/id6578420212 Bike App Compute...
How do I sharpen the tungsten electrode of a TIG welding torch?
Переглядів 1 тис.7 місяців тому
When learning TIG welding, the tungsten electrode often gets 'dipped' into the molten metal, so it's advisable to sharpen a large bunch of them and change as needed. It speeds up the learning curve as you don't have to keep stopping to sharpen. I sharpened three packs at once! #learningbydoing #learningfrommistakes Affiliate Links: BIKE App Computer apps.apple.com/us/app/bike-app-computer/id657...
Felt DD70 Service, Part III - Let's wash the Fatbike
Переглядів 12011 місяців тому
Felt DD70 Service, Part III - Let's wash the Fatbike
Felt DD70 Service Rear Derailleur, Part II - readjust the rear derailleur.
Переглядів 8011 місяців тому
Felt DD70 Service Rear Derailleur, Part II - readjust the rear derailleur.
Felt DD70 Service Rear Derailleur, Part I - cleaning an reinstall the rear derailleur
Переглядів 14611 місяців тому
Felt DD70 Service Rear Derailleur, Part I - cleaning an reinstall the rear derailleur
How to fixed the headlight problem of the Ducati ST4S
Переглядів 461Рік тому
How to fixed the headlight problem of the Ducati ST4S
How do you replace the handlebar on a Ducati ST4s?
Переглядів 166Рік тому
How do you replace the handlebar on a Ducati ST4s?
DIY Belt sander for sanding the bicycle frame tubes
Переглядів 1322 роки тому
DIY Belt sander for sanding the bicycle frame tubes
What tire stand are you using?
Manutenção fina
How do you turn it on?
I turn it on using the outlet's on/off switch. The router's switch is always in the on position.
@@CafeExMachinaKokkola Tnx, did you lock switches on router? via zip ties or something?
Yes, i lock it with zip ties.
Супер! Это действительно самое простое и понятное видео из всех на эту тему😊
How did you get it to stay on without using both hands?
What do you mean?
@@CafeExMachinaKokkola He means: What did you do to the machine to stay on without pressing the on-button? Probably a zip-tie and a switched outlet
I turn it on using the outlet's on/off switch. The router's switch is always in the on position with zip-tie.
Thank you for this video, i really needed it and appreciate it.
👍 merci
✌️super bien expliqué, c’est combien le couple de serrage pour les 3 vis ?👍
Torque for three bottom screw is 8 Nm + thread locker
Thank You man. You are perfect! That was exactly what i need!
Great job and great soundtrack :)
Is it difficult setting the depth?
No it's not! It's easy to setup
Hello! Please answer me! 5 Cush Drive Rubber Rear Wheel, do we have to buy it or is it available in the box! thank you
I think it included. I'm not sure - this is 5 year old videos.
@@CafeExMachinaKokkola Thank you for the information
I would suggest a foot pedal over the butten for better amperage control on thinner parts
Übung macht den Meister 👍👍👍
Good for you
Brutal el vídeo. Muchas gracias por compartirlo. Los rodamientos de los tensores se revisan también cuando tienes las correas fuera verdad?
this dude is blind as f xDD not hitting the hole for the tunsten elektrode and cant weld in a straight line.
This is true - my left eye is almost blind.
why do you need a cup that size for carbon steel? all that gas and its still grey lol. Keep a sharp tungsten, make sure you're burning the base before adding the rod, move a bit faster, and taper off on the pedal as you finish your weld.
Thanks for the tips! Learning continues. I tried welding different materials and fixed an old bike frame - with poor success. That's why the big cup. Small cup didn't work with the pipes.
@@CafeExMachinaKokkola I gotcha! If you want some good practice get a piece of 1/2” plate and just stack beads. Really helps get the motion of adding the rod down. Happy welding and happy holidays!
Happy welding and holidays you too!
Top fairing needs to be removed to not stress (and eventually) crack while removing the lateral panel, as per the manual. Good practice is grease the well nuts to avoid seizure down the road. At last, belts needs replacement each 2 years.
Panel seemed to fit without any stress ie., no force used to re-attach panel...over tightening fasteners will cause the panel to crack....
судя по ролику мусор собирал с со шланга где должно быть всасывание с пылесоса перепутал шланги и в таком случае нет эффекта самоделки
Moro! Satuin sun sivuille ku tuli hommattua ite isän vanha moottoripyörä takas, -74 500CB fouri, itekki kokkolalainen niin yllätyin videosta. Mullakin vähä isompi remontti moottoriin edessä, niin aattelin jos olisi antaa vinkkejä. Korjaamokäsikirjassa luki että alakerran saa purettua sylinterit paikoillaan? Vaihdan kyllä jakoketjun + laaharit, mutta sitten kuuluu kolinaa alakerrasta joka hiljenee kytkintä painaessa. Luultavasti ensiöketju/kumipalat loppu. Sylintereissä/männissä ei yhtään ohivuotoa niin sen takia ajattelin jos saisi purettua ilman sylintereitten purkua. Laita vaikka privana viestiä jos passaa :)
Rahina/kolina yleensä johtuu jakoketjusta. Itse sain tämän yksilön lähes "ilmaiseksi" koneviallisena. Rahina/kolina loppu kun kiristi jakoketjun... Ketju kannattaa tarkistaa ettei se syö lohkosta öljykanavaa auki.
@@CafeExMachinaKokkola kiristin ainaki oli ihan ok kireydessä. 15astetta ykk:oosta ja mutteri auki, en tiiä kuinka helposti sen pitäis liikkua mutta tuntu ehkä vähä "tahmeelta" kylläkin. Ehkä mää kummiski käytän auki kunnolla niin ompahan arvailut pois.
Thanks mate, you really helped me out .
Where did you get 5.3 volts the bl touch requires as the main board and daughter board only delivers 3 .6v mine worked a few times but was unreliable would trip before it even touch the bed i solved the problem with a Motorola phone puck i gets the correct voltage now it works great However it does the 5x5 calibration every time but at least it works now
Merci pour cette vidéo tres explicite.
Super help pull thanks!
Did you hava significant benefit changing the rims to spoke?
Of course - Style.
Is that front tire tube type ?
NM Screws?
I’ve done the same. But are you using a tube in a tube type- on a tubeless mag rim ??? Help!
No, i don't use a tubes.
@@CafeExMachinaKokkola tubeless rim with what tire?
@@NathanielJkamman same question, can i use that tire tube type on my Ducati scrambler tubeless rim ? With out inner Please hepl
Excellente!
Hello, I need to replace the fuel lines and the filter in the tank of my 2005 Ducati st4s. Can you tell me the internal dimensions of the fuel hose in the tank? I don't want to use the expensive original Ducati lines. regards
I do not remember, but i think it's 8 mm hoses.
Kuuluu vähän sivuääniä!
Nice build. I like the way you've attached the LED panel - very clean. What type of panel is that? Is it rechargeable? Most I've seen require those big heavy NPF batteries.
It's a Godox LEDM150 rechargeable light: www.bhphotovideo.com/c/product/1342103-REG/godox_ledm_150_led_light.html
Where is part 2?
Here: ua-cam.com/video/_M1LNIvQzSY/v-deo.html
Thanks for this!
Could you put a link for where you got your BL touch the one I got and many out there does not come with the correct cable in your forced rewire it I would prefer to have one that is already pretty wired
I buy it from here: www.an-cadsolutions.fi/tuote/creality-ender-6-bltouch-setti/
Dig the music in your videos 👍👍
Have you compared it to the sigma 18-35?
I have no a Sigma 18-55 mm object, but another good object for BMPCC 6K Pro is Tokina ATX-i 11-16mm F2.8 CF / Canon.
Show. Estou reformando uma semelhante aqui na minha oficina. Vou ter que colocar o motor no quadro. Excelente vídeo ❗👍🇧🇷
Why not just buy the stock Creality top?
I made my own - better.
The stock one blows ass, it just sits on top via gravity. And also because they are never in stock. These should have been shipped standard. But since they were not, everyone and their dog is trying to get them and they were not produced at the same rate as the machines for some absurd reason.
@@CafeExMachinaKokkola I wouldn't call yours better since one side is open, so whats the point of the top cover if you don't cover all sides?
Moro! Itse vasta 5kk harrastanut tätä 3D tulostusta, aloitin vaatimattomasti Weedo Tina 2 pikku printterillä mut nälkä kasvoi syödessä ja nyt pari päivää totutellut Flashforge Adventurer 3 kanssa.
I could not achieve good adhesion with my Ender6 either, but some glue stick on the bed solved it and it has been printing beautifully
I change to PrusaSlicer 2.4.0 then i get lot more setup options. Now it uses temperature of 215 C temperature for first layer and then 205 degrees for other layers. Also i change bed temperature to 60 degree and now it stick to bed much better. I will do to top cover to Ender 6, then temperature control will be more accurate
Always when disconnecting battery , disconnect negative terminal first and when connecting last….
0:17 "GO GO GO GO GO GO"
Spettacolare ! Che paese è?
è la Finlandia
Nice tires!!! Are those the OEM rims? I like them!!
What's the D-ring hardware you're using here?
Nothing special. Cheapest trailer D-rings from local hardware store. www.puuilo.fi/teopart-sidontalenkki-57x55mm-2kpl-peravaunuihin
Very good job, sir. Well done.