Відео

i really really want to get into masonry

👍

👍👍👍

I see some people add cement patch to big driveway cracks but dont they make an epoxy that works better for that?? Why do I see others use a two part epoxy on cracks?? Does it holds better than cement patch??

Is it possible to resurface concrete that's cracked/chipped, and a bit uplifted spots because of previous cherry tree.

Hi, what kind of prime did you use? I am using a grinder machine on my painted concrete drive way and I believe I need to prime as well before staining?

looks horrible

Damn Jones', always gotta keep up... Nice. As the years go by, consider update photos to impress us even more, if possible.

bro good job i would recommend stitching small heli bars across the cracks also the screed cement mix may crack as it is too thin - you need some expoxy product or sika product for the fairing coat - make sure the paint surface is not too slippery in wet add non slip granules to paint anyway just a suggestion brother - also your getting some reflection from the patches in the sun - need a thicker base coat -

I'm not fond of the painted look and you may get the home owners in trouble with the city if you paint the sidewalk, because they are "public" (AKA Government) property.

Is there any way to contact you directly

How long this will be last? There are not strong bond in the cracks.

Is this in a climate that gets snow, ice and salt?

Would an oil based stain be more durable?

How much do you charge per square foot?

How much did you charge per sq ft?

What is a screen board?

Is the mixture you fill crack with quick creat

Would this work on painted surfaces or what you recomend I really like your work . Thanks

I used valspar paint, only latsed about 3 years and it s $40/gallon!

QUESTIONS: What was the product you painted inside the crack before putting in the (concrete/patch) in the crack? Also, was that regular concrete or patch that you put in the crack?

Do you have a year later video?????

Use an SBR, sand and cement slurry in the cracks before putting the mortar in as a bonding agent . If a big crack you can drill into the sides of the crack and resin anchor rebar into it before filling with fine aggregate concrete.

Cool music, but I also watch a lot if car repair stuff cool video😂😂

I would have liked to have seen a list of products you used.

I’ll need to do this over a period of days - even weeks, depending on the weather and other commitments. And because the driveway is in constant use, I’ll have to do one side and let it completely cure before doing the other side. Do you see any problems with this approach?

You are probably better off "painting with portland", for the look. If you want it even whiter, buy white portland cement powder (if you can find it) Easy and very cheap to apply with a paint brush brush. You see, actual paint chips and peels eventually. Portland cement as your paint, doesn't chip or Peel, as long as it is applied thin, not to thick. If it does eventually wear, just reapply it.

My concern is that it appeared you began rolling the concrete paint over mortar patch while it still looked wet. Wouldn't the concrete paint need to be porous to allow the moisture from the mortar to escape? Otherwise I would worry about the concrete paint not sticking well to the wet mortar and coming off in short order.

Nice job

Man came out good, but honestly is a waste, that paint is trash , it peals easy and would get dirty just by walking.

Can you get a color that looks more like real fresh concrete?

that would last 1 winter in the UK, the ice would break the concrete.

If a jack was used on the driveway that paint is done. No way it can handle the metal wheels with the weight of the car on top.

Awesome video, I wish you were in Florida so I could hire you to do a similar repair, sadly my days of back bending are over.

I did just like you did and it works thank you

very interesting the way you make things loos very simple good work

Where are you located? I'd be interested in having mine done.

Question: can this process be used on a concrete drive that are slabs separated by pressure treated 2x4s? Can the 2x4s be covered. On ours they put concrete nails throughout the boards. Very difficult to remove.

I’m tired 😂😂😂😂 😂 he is patient and hardworking

Beautiful!

This will only work if the slab has not shifted. If so you’ll need to fill the void and lifting it first. But filling the cracks in this way will not last long at all, maybe a year before the cracks reappear. But overall good job simple

Looks awesome brother. What do you charge for this?

Nice job. Does driveway paint come in different colors?

Have you ever used cement all to fill the large cracks? Do you still use the same valspar driveway paint you used in the first resurfacing video that went viral?

What epoxy and primer did u use for this project I’m thinking about doing something like this ?

Awesome work! How much do you charge/how do you charge customers ? You’ve inspired me to start a small side gig!

What do you charge for something like that? I own a pressure washing and staining and sealing business and I would like to add that

What type/brand of mortar do you use? I’m planning to repair some cracks in my driveway, too. Thanks.

Great Video! Wish you were closer to us (Seattle area)!

What mortar do you use?