Відео

Great video I followed it while doing the job! hardest part for me was putting the moulding back on behind the ashtray What I found was easiest for that is putting the left and right side in at the bottom at the same time while pushing the ashtray back in place. great work it helped me out!

I’ve watched a lot of videos in the process of the installation, and your video to help me through. This process was best by far, your video was super detailed, it took me about 3 hours, but I got through it, I think I would’ve got through it a lot quicker if I would’ve discovered your video first.

I dont even think you put it in, all you like to do is talk 😴

I have to do one in a grand cherokee. I'm gonna drill my own drain hole in the side corner. It will be alot cleaner, that oil goes erverywhere. I'm with you, getting the one with the drain, and spray bomb it good with some black rustoleum

My battery is not in the trunk

Shut up and install it dude

Does the ECM have to relearn the system again once the terminals are disconnected?

It would of been nice if you could of shown your work

I'm just curious how this battery has done for the last year ... did it end up being the right capacity for the auto start-stop system? Is it still working a year later? Thank you.

The background noise is nuts....roadrace turned up fullblast.....great vid otherwise

Think this is exactly what’s wrong with mine.. belts are all fine but blades are intermittent. Here we go

Great video. I’m sure that was a lot of work to make it. I watched it many times. Thanks. I agree that it’s a great compliment to the directions. A few of my notes. It’s very easy to over tighten the tiny M3 machine screws and you can do damage doing so, esp. to the plastic cable pockets doing so. I saw it start to happen and backed off. In section 11 - step 1, I started to see the fabric of the top start to twist up around the screw and backed-off. He mentions it here: ua-cam.com/video/PQWOoqZiI6Y/v-deo.html. I am a habitual over-tightener, like my father before me. I didn’t need silicone. Section 1 / Step 1 - Rear Bow Mount Brackets: The video doesn’t include a walkthrough of installing the rear bow mount brackets. He mentions it here: ua-cam.com/video/PQWOoqZiI6Y/v-deo.html The instructions say to make sure the press-in nut has the ridged side facing the rubber tube, which is valid. I found I also had to pre-thread the nut to the screw a couple of turns before putting it in the hole in the rear downtube. I was unable to thread the screw into the nut while it was in the hole. Section 12 - Attach Bow Flap to Rear Bow here: ua-cam.com/video/PQWOoqZiI6Y/v-deo.html Note that he is inside the Jeep looking out the back window. Initially, I found the directions very confusing in this step. Video was key for me here.

Lmao I have demolished the hook and I still can't get it out.

Great video! I had to bend up some of the lower clips on my new one slightly so everything would fit. It still wouldn't stay in place, then I realized when you release the window back so it's against the felt, the pressure from the window is part of what holds the felt in place. The new one is holding great!

Thanks for the video! I had already installed mine a few days ago but was just watching to make sure I did everything right. I also had 2 screws left over. Don’t know what they are for. I guess just extras

Thanks man. About to do this same thing and you have some great hints and helps!

Great video! Like the Camaro I have a 70.

Thank you for making this video! Took me about 8 hours going carefully and rewatching everything you did multiple times along the way. I've also never removed a trim panel (or an infotainment unit) in my life, so that's probably why it took me forever. At the end of the day, nothing was damaged, no extra pieces were left over and the new screen works perfectly. Thanks again!

Do you know what size screw holds the soundbar grills on?

Yooo why’d u skip getting the left terminal out?! 😫 I’m having trouble getting mine off!!

Part number for the long bolts starter would’ve been helpful

We have a 2015 XTS and my buddy shop told me that it would be $1,608.00 to fix rear shocks. I will be doing them myself, is what i told my wife

Can you please post where you bought them at and a part number

This is the perfect video for replacing the touchscreen on a Cadillac XTS😬 Thanks for making it.

5:50 on 3/2/24. If not for your video, I would have paid someone to do it. Only issue was the clip. I struggled with it. Thank you.

Did this solve your starter clicking problem?

Nice video, so calm and confident! a couple things, i read that the calipar bracket bolts are supposed to be one time use only, did you ever see any issues with using the old ones? Also, any squeks or noise after driving for a while? Have you bled the brakes ever? and is this an automatic or manual?

How do you take them off can you show please u skipped that part

Which everlast battery from Walmart will fit in my 2012 Chevy Cruze ?

Video is suppose to be about Changing the starter. We don't need your life story. Quit trying to drag out your videos.

What if the car is dead how do u pop the trunk

Everything that could happen did, what a job eh. Nice work

I'm inspired to pay a pro now 😅

Thats the wrong size battery I believe. The bigger one is big for a reason. It's due to the automatic shut off it needs the bigger battery according to the dealer.going out to replace my gfs right now. I asked my the hell it was so big for a small car and that's what they told me anyways. Thanks for the video

Awesome video thanks

This was a life saver , thank you so much . Don’t know if could have done it without your guidance . Thanks again

Appreciate the video bro ! When disconnecting a battery the negative terminal should always be removed 1st When reconnecting the terminals the positive terminal should be installed 1st Doing it this way will eliminate any potential sparking from your wrench hitting any metal 0:49 and any sparking from the terminal touching the battery post.

OMG, you are so helpful. My sister and I were able to replace the thermostat housing on my 2008. Chrysler Sebring 2.4 l. It has a 164000 miles. And I know you just help me go a little further. Thank you so much. I appreciate your video.

Most felts the clips are destroyed taking them apart if you have issues with them coming up put a little dab of window urethane or equivalent

Je peut avoir ces commentaires en français ?

Could have ran some clean oil through kinda put the bolt in while dirty oil was still draining maybe have more patience

I just bought 6.5 kickers for the bar.. opened the box to my surprise, they are supposed to be 6.75 ughhh... i dont want to go back to best buy.. looking for ideas here

Im so grateful that you have put this video up. Like everyone else GM should at least given out the screen's. After studying the others video yours came on top. Wow how grateful I'm. THANK YOU!!!

After watching about 10 or more videos, this was the best one I found. Very Detailed. Thank you!!!

Thank you

Very helpful video. Thanks for posting. The Bestop site should link to your video instead of theirs.

Spent 1 HR 45 min on replacement great video saved $$$ over cad dealer😊

I'm about to buy a Chevrolet Cruze 2016 1.4 Ls. ¿Do you guys really recomend it? ¿Is is a good option? I just want it to be my daily work car. Please answer

Screen is hooked up in my 2015 correctly as per this video and for some reason it's not reading my touch

can you please tell me the number for this part, I have the same lawn mower, and can you tell me where did you order your part, I did call a toro dealer and they could not help me, thank you