Відео

@@Bohm.creations this is running radiolink rc6gs 👍 the fpv is dji running stock antennas. They key to it is the driver position roughly centered in the course and as high as possible 🍻

@ ok super ! Thank you and hello from France 🇫🇷 ;)

@Magneticitist I'd be interested ed to know if the head tracking feel intuitive for you. Sounds like maybe not if theres delay. I had similar issue on the storm32 gimbals and in the end I just wanted the stabilized view. I've heard that the yaw motor bearings loosen up with a lot of high speed off road driving so not sure if I'll be trying one of the the caddx/xf three axis. I do like the way three axis feels and mix in some steering input to the yaw so the camera looks into the corners ✌️

@@JIPPERR_1 I might have the ability to do it using the goggles I have but I honestly never tried cause I didn't like the idea of it. I don't think it would really be a problem though as far as it not being intuitive. As far as commanding the pitch or yaw to move there wasn't a delay or anything. When I say delay I just mean what I assume is the sensitivity of each axis. Basically I've been running the thing where I have the pitch and yaw on a couple PWM channels, and the mode select on another that is just a on/off toggle. I didn't have an extra potentiometer on the controller to adjust the sensitivity so I'm just dealing with whatever happens when switching modes. For me when just leaving the PWM mode channel 'low' it puts it in 3-axis follow mode. It seems to provide just enough lock on each axis to where the steering is not too counterintuitive. It's more of a tight lock that allows a bit of stabilization on each axis as well. When I switch the mode to 'high' it ends up being the yaw-only follow mode, but then while the pitch and roll stabilizing, the yaw ends up having much less of a hard lock than before in 3-axis follow mode.

Oh of course I forgot though, that is all using the older firmware so IDK what changes they've made. The caddx website was down for me when trying to get the firmware but I see it's back up now so I guess I'll see.

@@ztmanalansan1512 it's been a great rc for sure. The fpv install was easy too I just mounted everything inside the rollcage.

​@JIPPERR_1 i picked up a mojave today. Hehe, I can't wait to setup the camera and go for a rip! All thanks to your vids bro!🙏keep up the good work.

@@alexoliver9201 I've experiments very minimally with 1 axis gimbal. It helps for sure but 2 axis is quite a bit more stable. I like two axis for the simplicity and very direct feel of the car.

@@JIPPERR_1does the roll axis not introduce visual confusion? Also if you’re knowledgeable about this, can you reduce the roll axis in firmware?

@@funeralatpizzahut worked for me, if you try it please let me know if it works for you or not.

@@kodak_jack for me head tracking isn't a big deal but I know it's really high on the list for many people. The caddx gm3 and head tracking goggles looks like a very nice system and they've really made it well integrated for sure. For me when I've used a head tracker before it did not actually feel very intuitive. What did work well, and I think people may confuse this with what head tracking does, is having a 3 axis gimbal with yaw tied into the steering input so it looks in the direction of the front wheels and having a lot of range of motion in the yaw axis. This way to rc can really slide around and the camera will look into the corners or follow counter steering input etc while filtering out the jolts the car may experience. Head tracking could assist in this but not necessary for it. One area head tracking really helps is in tight courses where you want to look into the corner before you start to steer the wheels. Or driving slow and looking around, head trackers are really good for that, but it's such a low key application that head tracking etc is overkill. Long answer I know, end of the day I think people should go for it woth ht and 3 axis cause there is almost no way to understand it without experiencing it. My worry is that the caddx/xf and heq lack the tuning adjustments needed to really make 3 axis shine. Storm32 was extreme on the tuning parameters.

@@kodak_jack I would 100% try the caddx head tracking system if I had the opportunity

Yes! Lots less work to setup this gimbal. Great to have some options for gimbals.

Oh man that's great to hear 👍👍 I love the sc and tt trucks for sure. Storm32 really was a great learning experience and proved to me it was do-able. Caddx gm gimbal cable appears to be compatible with Vistavtx and caddx nebula pro camera. All bets are off for O3. The xf robotics gimbals on ali are super expensive because it's a batch or ten that they are trying to sell. I gave up on them being available individually and got the caddx gm2 fully expecting to replace the camera cable. Didn't need to though 👍😁

@JIPPERR_1 aaahhhh, now i get it. Yep, right, next one i buy will be the caddx 2 axis and ill get a cable for the 03 somewhere for it👍🏼👍🏼 Keep it up bro, love your vids man, i wouldnt be here without them👍🏼

Looking forward to the tutorial for sure! Steering wheel and foot pedals will be so fun to use. Good on ya for taking it on, you end up learning it all twice when you have to explain it all.

What equipment are you working with? O3 or the older stuff??

@ older, I think you have to order from the manufacturer, caddx just sticks their label on the gimbal

​@@Rckid28either way it should just be the case of running the right cable for your camera and vtx through the gimbal. That's what I was expecting to have to do but it worked out for me

@ oh well I gave up a wile ago, I’ll just sit back and watch your videos

That's pretty funny, I've mounted one of these to a trx4m and I actually emailed caddx to find out if it was plug and play with my caddx vista/nebula setup and they said no. So I didn't even bother to test it before routing the new cable. It's interesting to hear it worked for you out the box, I'm gonna have to try that.

@@funeralatpizzahutgood q! I get a stepped drill bit for the corners so I get a big radius there. Any sharp corners will crack open really fast. Usually I build a hoop type roll bar that the fpv gear attaches too. I try and get this close to the roof of the body to support it. I have dont the shoe goo and dry wall tape before. It can help but I dont do it much anymore

@@JIPPERR_1thanks! Thats good info, i will give it a try

@@connorclark8541 I was being a smart ass for sure haha. I think my spring rates are ok, big problem is the shocks won't keep oil in. So I need to get something that functions properly then I can get to work tuning the oil. Will give your advice a shot for sure. I guess in crawlers shock oil is all about how fast the rc transfers weight?

@JIPPERR_1 it's more of how slow it can transfer weight but still maintain control. If you slow it to much the tire picks up or doesn't drop quick enough

Thanks Erica! It's been easy to meet people into crawling, it's fun for sure but I can't do with out my fast rc's

@@rcautoball I have a pretty good idea of average speed from the lap distance and time but no idea what the max speed would be. Just under 30kph average. Probably around 50kph max? I did get to full throttle a few times

@JIPPERR_1 That's what's up! I felt like you got over the 30mph mark (about 50kph) a few times. But it also felt faster, which I'm sure is due to the scale of the rig. I'm gonna GPS mine next time I go to the track and see what I can hit on the straight.

@@rcautoball the narrow track makes it feel fast for sure. About 3 or 4 ft wide 👍This rc should top out around 65-70kph when it's got proper traction.

@@chrisginoc that's correct. Perfect fit 👌

@@JIPPERR_1Do you only run it on 6s or do you ever run it on 4s? I’m trying to decide between a Mojave, Fireteam or Kraton.

@@Johnny6ex stock suspension 👍I might have put in thicker fluid, 1000cst. I think stock is 500

@JIPPERR_1 uh dono bout that man i prefer faster

@@ChaddRainsFPV thanks my dude 🙏

It's getting easier all the time. The caddx/xf/heq gimbals look to be very good and will save a ton of work. This build was different for me as I usually build off the chassis. This one has the fpv stuff tucked into the body roll cage, it's not perfect but definitly very good. The install was as easy as it gets, also maintenance cleaning etc is straight forward with the fpv out of the way.

@JIPPERR_1 have you ever looked into using a steering wheel and screen over the goggles and control??

@@ztmanalansan1512 thanks my dude 🙏

@@leonelmolinajr2 proline baja bug for short course 👍

@@boccatxrx5023 the fx gimbal is going to be the way to go, I'll be getting some myself 👍 just waiting for the dust to settle a bit and I'll get a 2 or three axis. In a way this is what I've been waiting for. What I'd like to see are more of the control boards and motors available so I can work them into the custom builds.

@@ChaddRainsFPV 🙏

@@twistedyogi hey this isn't the 03, we're using an original dji airunit with the caddx camera on this rc. All the stabilization you see is via a two axis gimbal I've built. That being said I feel the latency is tolerable on this equipment, I do notice it at times especially if I run analog for a while then switch back to this machine. I've been told that dji is still best for range and penetration. Hard to know without back to back testing, wish I had my goggles recording here cause it got quite mushy at the far ends of the course.

@@MUSICPLAN777 this is a 10th scale so about 325mm from axle to axle

@@JIPPERR_1 thanks mate, you from US?

@@mackmcd8725 the Google maps hunt is lots of fun. In my area open street maps also shows a lot if walking paths so I look at both quite a bit 👍

check out Qlite osd 👍

@@chriscord6524 I see what you mean, I was more interested in what it feel like for someone having the rc go past at the typical speeds I was driving. It's pretty not scary as long as you see it coming along. Average speed is like 25 to 30kph. So about like a bicycle

@@JIPPERR_1 I use mine as more of exploration and perimeter security

@@JIPPERR_1 don’t get me wrong. I really like all your work. I’m just a data geek and like all those numbers crowded up on screen. But I’ve also lost more than 5 drones learning

@@chriscord6524 I'm with you 100% love having the gps and other data on screen 👍