Відео

You dont put anti-seize on spark plugs especially ngk, this alters torque and you dont want to remove head to fix this, ngk plugs already have special coating on the tread

I have a 2022 and yup I found the tool lol . Thanks buddy 🙂

I'm about to put a Mechman in my 14 JK, thinking I would attach the 1/0 ground to the lower alt mounting bolt - between bolt head and alternator. I see you put your ground behind the alt between it and bracket - does that not kick the alt slightly askew and not perfectly inline with the belt path? Mechman says ground to alt but I'm trying to figure out the best way to do that.

Lmaoo

does the lights constantly flash?

Looking to put the HMF Titan QS pipe on my ‘23 Kingquad. Thanks for this!

How are the East lake axles holding up for you?

Run your EQ lol set it how you want it before you set your gain. Why didn't you show how do you set your gain with it?

So the original cable stays with the new 0 gauge 😮 No problem?

Wait , So the stock Positive is still connected? 😮

Its only 30 on sw because its on +10

Awesome tires run them on all my Hondas here in Florida swamps they pull really good

How did you like this exhaust snorkel? Wondering if it did well in deep water vs the floating and water wheelies??

Thanks for the video. Squeezed mine out with minimal plastic removal with the help of your video for replacement after puncture. Not for a first time mechanic I would say, but most ATV repair is like that.

Nice video. For the electrical clip on the alternator, does yours click in or is it more of a suction and pressure clip. Mine does not click and is seated well but if I forcefully pull it, it will unseat.

SO that exact oem belt worked out good?

So I ordered my new “plug”and was looking for technical advice on changing the deep one as well as gap. Very helpful video. I never even thought to look in the tool kit, and now I’ve learned that there’s actually two plugs 🤦‍♂️

Was you pleased with the axle replacement from east lake? Thinking about getting one for mine but a little hesitant

I notice you use the RCA for the DD1 to tune amp.. in the manual it explains to put the NEG probe on the amp's ground and the POS probe on the POS speaker terminal.. is it the same thing? if that makes any sense.. very nice video though. i actually tuned my amp how you tuned your amps.

Thats an oreion Reeper4.... I own a 2016 1100cc and these things are a blast.... I've had mine in the dunes, in boulder fields, climbing mountains, and long distance trail riding (my favorite thing to do) and I take my daughter and son-in-law out a lot.... I also take my great grandchildren out in it, and they love this thing..... I always hear from people that they like it a lot.... when I bought this it had 165 miles on it, and the previous owner did something to the transmission (I heard he was jumping it) and 3rd and 5th gear wouldn't go in.... I did the research and got a brand new transmission for $1000.... changed it out and haven't had any problems in over 3000 miles now.... and we've been all over Nevada with it.... we go for all day trips and have come home in the dark.... I didn't like their headlights so I swapped them out for some great led headlights.... I didn't like their stereo so I swapped that out for a low dollar Walmart stereo.... the next thing on my agenda is the shocks.... and possibly building my own a-arms and longer axles so the shocks will sit slightly tilted inward for a smoother ride.... with everything that I've spent on it, and what I purchased it for, I have less than $6500 into it.... a big difference from a $30K price tag on any other 4 seater side x side.... these things come from the factory street legal with blinkers, windshield, mirrors, turn signals (with some mounted in the mirrors) car seat belts, an actual 5 speed transmission, brake lights, and it has been a blast owning it.... and the best part is that the whole family likes going out in it.... if you're going to beat on it, you'll need to do upkeep on it.... and the nuts and bolts should be checked on a regular basis.... I plan on getting a motorcycle towable camper to pull behind it when we decide to travel the great western trail, from Williams Arizona north as far as we can get in a weeks time and then turning around and coming back the following week.... can't wait.... if that $30K price tag keeps you from buying a side x side, take a look at one of these.... and save yourself close to $10K.... and have a great time riding.... tomorrow, my daughter and son-in-law and I are going on a close to 160 mile round trip on desert trails.... and crossing over two mountain ranges.... and I have no doubt we're going to have a great time, and the Reeper should do just fine (been on this trail before)....

Thanks for sharing

I put the multimeter on the blue/red and orange/white wire. I get 7 volts when in N/H/L and 12.9 when in R. Seems like it should work but not sure why im getting 7 volts when not in R? Thanks

Gotta love the Suzukis man they get the job done, I love what you've done with your king

This video is definitely old because nowadays that's all I see is the big 7 for Jeep. Tons and tons of Jeep videos. Hell they even made premade wires all pre labeled to make it simple. All for Jeeps. And you don't need to put a fuse in between the alternator positive. Especially with that thick wire. I mean anything can happened regardless of thickness but you don't need to. If you're OCD then you will. Lol Other than that, good job my man

Gear reduction?

Very nice video. Where did you launch from? Thanks for sharing.

Looks great!!

I wired mine basically just like this. My center screen that blinks function (bt) doesn't display anything now. Ideas?

Do you know if Oreion bought out Duruxx? These are identical to Duruxx, but all I can find is Oreion. Thanks

Just bought and installed the Twin Air today based on this video. It’s expensive but the fit is perfect.

Wow, thank you so much for this video highlighting the basics of this bike! I pick mine up tmrw & also as a steal of a deal! So excited, especially after reading these comments.

I’m 99% sure the pioneer has two studs under the hood, that are only hot when the key is on… thats the “better way” if there was one, but the switch is nice too.

In the future, you’ll sell this, and that fuse behind the switches will piss the next guy off. Lol

good job! Keep it up

Where did you buy that very nice motorcycle?

Very sharp Motorcycle !

Love this thank you so much for sharing!!!

Question. Here’s my scenario. 8 channel amp with a combination of 6.5s, 6x9s and 8 inch speakers all mids and highs hooked up. Once I know my max vol at the head unit before distortion, then I set the gains for each channel using the dd1 until the red light comes on? It doesn’t matter what size of speaker is connected to the channels or if there’s a pair bridged? I’m just to simply go based off the red light going on and back off the gain until red light goes off?

What tyers are those

There is a dip switch below the middle fan that switched from OC mode to Game mode, toggle it with the PC off. Sounds like the clock is unstable, or try msi afterburner to reduce the clocks a little. Still gonna be a lot faster than an R9 280.

youtube randomy recommend your channel

Old-school Computer Remember Storm Trooper Case I use run my old AMD FX Bulldozer with old Radeon 5700 crossfire cards on 16 gb 😀 corsair vengeance 1600

Change your bios to pcie gen3, then run your 2080s again, bet you it fixes it.

Make an updated video on your build! Are you still using the CoolerMaster case?

❗ 'promo sm'

Have you tried facing the subs towards the rear?

Exactly what spark plugs is needed for replacement?

Date: 5/25/2023 A 2020 Suzuki DRZ200 "same bike as above" w/only 255 miles for $4550 close by me. A tad to small for me at 5'-11" 200 lbs. I'm guessing.

I just bought those subs an have them in a sealed Atrends Bbox, can’t wait to hear them!

Love the setup bro ..I'm thinking bout getting the same amps