Відео

Where's the filter location at

01 deville here. Had a 13mm bolt holding down the clamp.

I got similar issue on a honda. The air is actually crushing and restricting the low side hose and eventually starving the pump. Have new line, reseevoir and o rings. Hoping that solves my problem thanks.

Great Video thanks! Also, who else is working on a Pacifica in 2024 lol?

Thank you i plan on doing all new ball joints and upper and lower control arm bushings for my 74 monte carlo and this is the closest thing I found to it ,only difference is I'm pulling the coil out for air bags at the same time

Does it not have a filter to replace when u change the fluid?

Very well done and helpful video. Thanks so much.

The best video I've found doing this job! Thank You

amazing how time goes by and these vids still can contribute to the communities. I'm fixing my 97 and it is basically the same steps but I'm asking myself if do i need to add grease before the grease seals .. anybody ??

💜💚🇺🇲🌎🌏🌍👽🥊💪🧠

Yup same thing on mine

Thank you buddy

Hey man I was curious as to what the tranny was doing prior to the fix? I'm asking because my transmission all of a sudden won't shift into any gear. And has a grinding noise throwing it back into park. 1998 dodge ram 1500 4x4 5.9l

How do you take that metal pipe off the water pump

Great video. Thank you for making it. You made it very simple for me. I thought it was going to be a horrible job since the engine is so large and hardly any room.

11 years old comments and it’s 2024 and thank God this man put this video up so I can fix my mama’s truck. So thank you sir doing a great job!❤

Hey can anybody help me I have this truck it will start and run but when u take ur foot off the gas it die and will not start back up for a day or two

Part 3

2005 Nissan Maxima

AWESOME! This is the exact video I was looking for!!

great job on this upper control arm video. I'm having issues with the upper control arm ball joint not dropping. I'll have to use the hammer on the spindle method.

Absolute slapper of a video, plain and simple, thank you so so much

Anyone still in this comment thread? I need help!! My 01 Dakota had a trans leak from the Pan. Replaced the pan did the service and now when I put it into reverse it acts as if it’s in park and neutral puts it to roll forward. Not sure what I did or how to fix this please one help!!

You don't need the specialty wrench for the fan clutch. Leave the serpentine belt on it, use a long pipe wrench, and whack the shit out of the pipe wrench handle. It's been a while, but I seem to remember the thread hand was correct for it to tighten during engine rotation if you're worried about not being able to get the fan back on tight enough.

Currently preparing to do this today.

Man this is a great, well explained video. You've probably helped thousands of people with this. Thank you very much sir.

Thank you for letting me know the sizes, most of these videos on 00 to 05 caddy suck. Your's was very informative. Thanks 👍.

How to remove motor mount stud

Thank you I needed this 🙏🏾🙏🏾🤙🏾🫶🏾

Anyone know what size socket for the axle nut? I’ve searched the entire internet and alls I can find is the size for the 2500 and the 4wd which is 43mm and that’s way to big for my 2 wheel drive

is there a video on how to refill and bleed the power steering system ? we just bought a caddy and it leaks (squirts) power steering fluid badly. what causes this anyways ? thanks. like this video.

Speed sensors on these transmission control alot. Replace speed sensor 1st and go from thier. I chased my tail changing out solinoids. Which was not the issue. It was a 30$ fix

If this is what’s wrong with my 99 Lincoln Navigator then I’m going to off myself

Thanks for posting this video. Very informative and helpful!

HALF ASS.JOB USELESS VIDEO ? BY SOME OF THE LAZIEST ...

Thank u!! Bolt has broke, great vid!

Just bought me the same truck same issue . Thank you buddy

My makes a sound, but it doesn’t sound like that. It sounds the belt

I love this commitment cigarette mechanic!😊

Appreciate it

Your metal pipe that had the leak, can anyone "label" this item so i can look it up to buy a new one.... same issue on the same truck here. Thank you again for the video, really helped me out.

Soo how many qrts without changing filter?

Thank you for making this video was very helpful truck is back up and running👍💯👍

I just did this tune-up on my '05 Pacifica Touring 3.5 ltr. Same car , same engine and procedure, and in my case even the same color lol. I also changed out the pcv valve and air filter. At $45.00 apiece new, I decided all of those dedicated individual ignition coils looked completely serviceable, so they were reused , lol. The plugs are recessed pretty deep, and mine were damned near seized due to heat. I got my Pacifica used, and the plugs looked OE. They were just terrible. Be VERY careful with the removal and reinstallation of the spark plugs. If you go full gorilla on the intall, you will likely be headed into some very costly engine repairs. I put just a dab of anti-seize on the threads of my new plugs. Great video.

THANK YOU SO MUCH!

So is there a wholes for the Transmission to the radiator

How hard should it be to turn over by hand? Is it normal to have to use a wrench and a good amount of force? Even with the spark plugs out

Hit the crap out of that one

Thanks for this video. Just picked up a 2005, and had no idea where the trans fluid dipstick was located till watching this. Also, not sure why they locked it

Thank you for the video. Exactly what I was looking for.