Target Forge
Target Forge
  • 156
  • 549 464
🔫 The Godfather of Airguns: Exclusive Interview with Tom Gaylord on Airgun History & Marksmanship 🎯
Join us for an exclusive interview with 🎩 Tom Gaylord, the Godfather of Airguns! Recorded live at the 2024 PA Cup 🏆, we dive deep into the fascinating world of airguns. From rich airgun history and expert marksmanship tips to the sheer joy of outdoor fun 🌲, this is a conversation you won't want to miss!
👉 Don't forget to LIKE 👍, SHARE 📢, and SUBSCRIBE 🔔 to The Airgun Geeks Channel for more exciting content!
🔗 Affiliate Links: Using these links supports our channel at no extra cost to you. Thank you for your support! ❤️
Bass pro basspro.rockporch.com/mlink/246?userId=141557
Cabelas app.rockporch.com/mlink/245?userId=141557
Airgun Depot app.rockporch.com/mlink/372?userId=141557
#Airguns #TomGaylord #GodfatherOfAirguns #PelletGuns #AirgunHistory #Marksmanship #OutdoorFun #PACup2024 #TheAirgunGeeks #AirgunEnthusiast #ShootingSports
Join this channel to get access to perks:
ua-cam.com/channels/nEWK-YykT9-uf1F49Xnqig.htmljoin
Affiliate Links That Support The Work We Do Here!
Use our link and visit Airgun Depot! app.rockporch.com/mlink/372?userId=140361
CS2 - amazon.rockporch.com/prdlink/UBed3CCDvC
CS2 L2 (Battery Powered)- amazon.rockporch.com/prdlink/DLgZx6QxCT
CS3 - amazon.rockporch.com/prdlink/nYp6zRhSOu
CS3i- amazon.rockporch.com/prdlink/JNULlImjtd
CS3 L3 (Battery Powered) - amazon.rockporch.com/prdlink/UVZP8sYOVV
CS4 - amazon.rockporch.com/prdlink/DPZTX4fHQM
CS4i - amazon.rockporch.com/prdlink/JQbFdsXagP
The “i” versions have the AC power supply built into the chassis and can run on 12VDC as well.
Support me on Patreon to help fund the work done on this channel:
Patreon Link: www.patreon.com/targetforge
Visit us today and see what innovative home range equipment setup looks like! targetforge.net/
Переглядів: 74

Відео

🔧 Ultimate Upgrade! Transforming the Caldwell Stable Table with Truck Bed Liner 🚀
Переглядів 51821 день тому
Discover how we revolutionized the Caldwell Stable Table using a super durable spray truck bed liner! 🚚✨ In this video, we dive deep into the prep, mixing, and application process using a paint roller to dramatically enhance the usability and feel of the Stable Table. This is our third and most impactful upgrade yet-don't miss out! 💪 Affiliate Links: Adhesion Promoter - amzn.to/3AyyFjL Raptor W...
🚀 Revolutionizing Airguns with Carbon Fiber! Interview with Black Arts Design's David 🎯
Переглядів 292Місяць тому
🚀 Revolutionizing Airguns with Carbon Fiber! 🚀 Welcome back to The Airgun Geeks Channel! In this exciting episode, we have an exclusive interview with David from Black Arts Design, a trailblazer in the world of airgun accessories. 🛠️ David shares with us his journey into pioneering carbon fiber solutions for common airgun challenges, bringing innovative and attractively priced accessories to ai...
Airgun Range DIY: 3 Easy Ways to Mount Targets on Cinder Blocks
Переглядів 585Місяць тому
Looking to enhance your airgun range with secure target mounting solutions? In this video from The Target Forge, we demonstrate three simple methods to install threaded studs into common cinder blocks-perfect for attaching your airgun targets without structural hassles. We'll explore a purely mechanical approach using common wedge anchors and two different epoxy techniques to set studs securely...
🎯 Unlock Precision: NateChrony & Airgun Accuracy Secrets 🏹 | Exclusive Interview with Nate himself
Переглядів 7292 місяці тому
Get ready to dive deep into the world of airgun accuracy! In this exclusive interview with Nate from NateChrony 🇦🇺, we explore what makes his chronograph a must-have for every serious airgunner. 🛠️ Discover how reliable measurements and pellet speed tracking can fine-tune your shooting game like never before. Whether you're into marksmanship 🎯 or tuning your gun for ultimate performance, this v...
3 Simple Hacks to Upgrade the Caldwell Stable Table: Make It AWESOME! (Pro Tips Inside)
Переглядів 6142 місяці тому
In this video, we take the Caldwell Stable Table from "just okay" to absolutely AWESOME with three simple and affordable upgrades! I’ll walk you through adding the Caldwell Carry & Storage Bag for easy transportation, upgrading the legs with heavy-duty swivel feet for better stability, and finishing it off with plastic caps for a clean, polished look. These quick upgrades improve both the funct...
Exclusive Interview with Rossi Morreale! Announcing The American Airgunner Challenge 2024
Переглядів 3582 місяці тому
I caught up with Rossi Morreale, host of American Airgunner and The American Airgunner Challenge, at the 2024 Pyramyd Air Cup in Ohio for an exclusive interview! Rossi shares exciting details about the upcoming season of The American Airgunner Challenge, the biggest airgun TV show out there. Get a sneak peek at what’s coming in 2024, along with insights from one of the most recognized faces in ...
Ultimate O-Ring Tool Kit for Airgun Maintenance | Must-Have Tools for PCP Airguns & More!
Переглядів 9342 місяці тому
In this video, I dive into my complete O-Ring tool kit, featuring three different sets of tools that make airgun maintenance and O-Ring replacement easier than ever! Whether you're servicing your favorite PCP airgun, working on automotive or industrial projects, or tackling any task involving O-Ring replacement, these tools are essential. I’ll also show you the perfect zipper case that keeps ev...
Meet Birds of Prey with Joe Dorrian at Pyramyd Air Cup 2024 | Support The Airgun Geeks Podcast!
Переглядів 882 місяці тому
Get ready for an unforgettable experience at the 2024 Pyramyd Air Cup! On Friday, September 13th, from 10 AM to 12 PM, The Airgun Geeks Podcast is thrilled to host a special event featuring the legendary Joe Dorrian of the Ohio School of Falconry. Joe will be offering exclusive photo opportunities with his majestic birds of prey, and all donations will go directly to support The Airgun Geeks Po...
Caldwell Stable Table Review: The Ultimate Shooting Bench for Precision and Comfort
Переглядів 2092 місяці тому
Looking for a rock-solid shooting platform that you can take anywhere? In this video, we dive into the Caldwell Stable Table-a highly durable, portable shooting bench designed for firearm and airgun enthusiasts. I’ll walk you through the easy assembly process and demonstrate why this table is perfect for hunters, shooters, and preppers alike. Whether you're sighting in your rifle, practicing on...
Caldwell Stable Table Review: The Ultimate Shooting Bench for Precision and Comfort
Переглядів 9022 місяці тому
Looking for a rock-solid shooting platform that you can take anywhere? In this video, we dive into the Caldwell Stable Table-a highly durable, portable shooting bench designed for firearm and airgun enthusiasts. I’ll walk you through the easy assembly process and demonstrate why this table is perfect for hunters, shooters, and preppers alike. Whether you're sighting in your rifle, practicing on...
Spika Binocular Chest Rig Review: Compact, Secure & Ready for Action | Hunting & Birdwatching Gear
Переглядів 3422 місяці тому
Spika Binocular Chest Rig Review: Compact, Secure & Ready for Action | Hunting & Birdwatching Gear
Thrilling Iguana Hunt & Airgun Adventures Exclusive Insights from Sunset Aquatics
Переглядів 3592 місяці тому
Thrilling Iguana Hunt & Airgun Adventures Exclusive Insights from Sunset Aquatics
Ultimate 7000 LM LED Flood Light Review | Energy Efficient & Easy DIY Install
Переглядів 1552 місяці тому
Ultimate 7000 LM LED Flood Light Review | Energy Efficient & Easy DIY Install
Dead Lead Air: 10-Meter Champ Christine Larson & Jason on Airgun Innovation | RMAC 2024 Interview
Переглядів 4383 місяці тому
Dead Lead Air: 10-Meter Champ Christine Larson & Jason on Airgun Innovation | RMAC 2024 Interview
Overcoming Adversity in Competitive Shooting | RMAC 2024 Insights with John Rupple, Bill and Pat
Переглядів 2144 місяці тому
Overcoming Adversity in Competitive Shooting | RMAC 2024 Insights with John Rupple, Bill and Pat
Ultimate Shootout at RMAC 2024! New Airguns Unveiled & Exclusive GX Compressor Tips
Переглядів 1,1 тис.4 місяці тому
Ultimate Shootout at RMAC 2024! New Airguns Unveiled & Exclusive GX Compressor Tips
Uncovering Scheels: The Ultimate Online Store for Dads & Outdoorsmen! 🌟🔍 #GiftsForDad #OutdoorGear
Переглядів 2055 місяців тому
Uncovering Scheels: The Ultimate Online Store for Dads & Outdoorsmen! 🌟🔍 #GiftsForDad #OutdoorGear
INEXPENSIVE DIY Bench bags! Let's look at some fill options! Part 2
Переглядів 2,1 тис.5 місяців тому
INEXPENSIVE DIY Bench bags! Let's look at some fill options! Part 2
🔌 Top Test Leads for Every Toolbox! | Target Forge Tests Budget-Friendly Flexibility 🔥
Переглядів 1696 місяців тому
🔌 Top Test Leads for Every Toolbox! | Target Forge Tests Budget-Friendly Flexibility 🔥
🏹 Ultimate Backyard Target Solution | Zip Range by Zip Targets Review
Переглядів 5886 місяців тому
🏹 Ultimate Backyard Target Solution | Zip Range by Zip Targets Review
Shots & Giggles with PJ Clarke! 😂 | Behind the Red Panda & Covering Key Media Events as a YouTuber!
Переглядів 2906 місяців тому
Shots & Giggles with PJ Clarke! 😂 | Behind the Red Panda & Covering Key Media Events as a UA-camr!
🚨 Urgent Update: GX CS4-I Compressors Back in Stock! Secure Yours Now! GREAT PCP Airgun Gear 2024
Переглядів 9936 місяців тому
🚨 Urgent Update: GX CS4-I Compressors Back in Stock! Secure Yours Now! GREAT PCP Airgun Gear 2024
The Urban Airgunner Rides Again! | Exclusive Comeback Interview with Rick Ward
Переглядів 2656 місяців тому
The Urban Airgunner Rides Again! | Exclusive Comeback Interview with Rick Ward
FX DRS Reveal: Exclusive with Johan Axelsson + Giveaway & DIY Maker intro #FXAirguns #FXDRS #airgun
Переглядів 1,5 тис.7 місяців тому
FX DRS Reveal: Exclusive with Johan Axelsson Giveaway & DIY Maker intro #FXAirguns #FXDRS #airgun
2024 Airgun Hunting Explored! Chris Turek & Rick Rehm Break New Ground Airgun Geeks Podcast
Переглядів 2988 місяців тому
2024 Airgun Hunting Explored! Chris Turek & Rick Rehm Break New Ground Airgun Geeks Podcast
Breaking Barriers with the Red Panda Inside Karma Airguns Journey to Triple Crown IWA 2024 Exclusive
Переглядів 1,1 тис.8 місяців тому
Breaking Barriers with the Red Panda Inside Karma Airguns Journey to Triple Crown IWA 2024 Exclusive
Install the Essential Flow Indicator Kit on Your CS4-I GX Compressor: A Step-by-Step Guide!
Переглядів 1,5 тис.8 місяців тому
Install the Essential Flow Indicator Kit on Your CS4-I GX Compressor: A Step-by-Step Guide!
Introducing the ALL new GX CS4-I High Pressure air solution for your PCP!
Переглядів 9 тис.8 місяців тому
Introducing the ALL new GX CS4-I High Pressure air solution for your PCP!
Giles Barry Unleashed Inside Airgun 101 & Beyond Airgun Geeks
Переглядів 3008 місяців тому
Giles Barry Unleashed Inside Airgun 101 & Beyond Airgun Geeks

КОМЕНТАРІ

  • @bretshivers8352
    @bretshivers8352 6 годин тому

    what an amazing person to meet and talk to!! Tom is a plethora of knowledge and its good to see him again

  • @ianbrown5682
    @ianbrown5682 6 годин тому

    Always enjoy listening to the God Father of Airguns. Keep up the great shows. Ian UK

  • @joshuagibson2520
    @joshuagibson2520 6 годин тому

    Tom is the man. I hope to meet him one day.

    • @joshuagibson2520
      @joshuagibson2520 6 годин тому

      His writings are by far my favorite. Better than videos or anything else. His blog on Pyramyd Air website is hopefully backed up somewhere. Digitally and Physically.

    • @joshuagibson2520
      @joshuagibson2520 6 годин тому

      And there is zero bullshit when it comes to his articles. He is a very straight shooter in more ways than one.

  • @DonAsk-ks2qy
    @DonAsk-ks2qy 10 годин тому

    Exactly the information I've been searching for. I bought several fittings thinking the 1/8 npt threads were bad but I didn't know about the bspp threads which is why I couldn't get the 1/8 npt to screw on. Thanks.

  • @TimZyx
    @TimZyx День тому

    There's no way that's 7000 lumens (probably pushing to hit 1500-2000), but looks like a decent light for smaller areas.

    • @wruehl
      @wruehl День тому

      Have to disagree with you Sir, it is like daylight and covers a huge area.

  • @Jeeper1378
    @Jeeper1378 День тому

    The little block the plenum screws to has a small transfer hole through it. Open it up to 4mm and gain 40-50 FPS.

  • @deweywaddell-waddellwildli8867
    @deweywaddell-waddellwildli8867 6 днів тому

    I bought my compressor about 18 months ago and after 6 months I noticed a squeaking noise so I contacted you after seeing your maintenance video. I purchased the two syringes of lubricant you recommended and performed the required maintenance on my compressor which stopped the squealing. I've performed maintenance twice now in the past year on my compressor and it's been working absolutely flawless. I own several air guns and shoot almost daily. I'd highly recommend this compressor and the lubricant you recommended.

    • @TargetForge
      @TargetForge 5 днів тому

      Thank you for the kind words! Nice work!

  • @RonaldPutnam
    @RonaldPutnam 8 днів тому

    Too heavy, and took too much time to put up & take down, sold mine.

    • @TargetForge
      @TargetForge 8 днів тому

      Mine is right around 50lbs, does not seem heavy at all and seems really well planted. I love mine. Thanks for the comment!

  • @dvpzy
    @dvpzy 8 днів тому

    I love this! I want to save the moderator. Most people just destroy it.

    • @TargetForge
      @TargetForge 8 днів тому

      Thank you! Love the comment!

  • @adriankim6618
    @adriankim6618 9 днів тому

    Hi 👋 This can fill my 100 cu ft 4500 psi scuba tank? Without any problems? Currently I have 3300 psi.

    • @TargetForge
      @TargetForge 8 днів тому

      Yes, I demonstrate it in several videos. Thank you for your comment!

  • @michaelgalloway914
    @michaelgalloway914 10 днів тому

    Thanks!

  • @ronaldjones4569
    @ronaldjones4569 10 днів тому

    What do I need to do if I think I put to much grease in it by turning the grease know too much

    • @TargetForge
      @TargetForge 8 днів тому

      Open the burst disc fitting and remove the disc and the bolt that secures it. Make sure you have good water flow (My light kit is great for this) and let it run for an hour. Carefully use a cotton applicator and clean all the excess gook out of the burst disc port and carefully reassemble. Should be good to go now. Don't do that again! Lol.

  • @WolverineBlue17
    @WolverineBlue17 11 днів тому

    Nice video! How would you rate this compressor when planning on filling 68 cubic inch / 4500psi paintball tanks vs the Yong (assuming good one). I’ve seen the Yong fill a tank like that from 0 to 4,000 psi in 5 mins.

  • @Mudring76
    @Mudring76 12 днів тому

    Do you suggest using a inline air filter with these to reduce moisture?

    • @TargetForge
      @TargetForge 12 днів тому

      On the CS2? Definitely. Less so on the CS3. On my CS4, I use the onboard separator only and it has works great. The big question is "What filter?". The simple cotton plug is not really effective, once saturated it is just a humidifier, it cannot remove anything once its wet. A TRUE coalescing separator is perfect, but not inexpensive. I have videos on this topic, let me know if you need a hand finding them. Thank you for your comment!

    • @Mudring76
      @Mudring76 12 днів тому

      @TargetForge sorry I didn't specify I'm new to the PCP. I purchased a CS4 and the filter is a 30mpa/4500psi High Pressure Air Filter, from Amazon doesn't really say what's inside for the filter material it stand up and has a drain valve.I'll be using for a Megalodon and a harpoon and I also a separate tank

  • @panchopachangas4450
    @panchopachangas4450 13 днів тому

    You wouldn’t happen to have a CS4 rebuild video? Mine will stop working at around 1000psi and I have to shut it off.

    • @TargetForge
      @TargetForge 8 днів тому

      I do not, please contact Jason at GX via Amazon. He is supposed to be the support guy, let's make him work. Let me know how it goes. I wanted to do a cylinder exchange managed here in the US, could not get the factory to support it. That cylinder assembly is a HUGE PITA to disassemble and put back together correctly.

  • @freddybanuelos9039
    @freddybanuelos9039 15 днів тому

    Haha I shoot my air guns in the Mojave Desert

  • @freddybanuelos9039
    @freddybanuelos9039 15 днів тому

    Will this fill a 6 litter scuba tank?

    • @TargetForge
      @TargetForge 15 днів тому

      Absolutely, fills my 12 ltr just fine. Add my coolant light and hour meter to make it even better!

    • @freddybanuelos9039
      @freddybanuelos9039 15 днів тому

      @@TargetForge sir… thank you so much, you’ve earned my subscription and likes 👍. I still haven’t bought one but , I been watching your videos . I really like this cs4 model .

  • @RedLetterVisions
    @RedLetterVisions 18 днів тому

    Any way one could add an auto shut-off mechanism as well? Thanks!

  • @NateChrony.
    @NateChrony. 19 днів тому

    A+ work - really smart to go grey & keep that heat down - NateChrony approves!

  • @slingingsteel9744
    @slingingsteel9744 20 днів тому

    Yes! Thank you god we have been unburied from what has been! I like the mods you have done to the table. I don’t have one yet. Been looking at this one though. My guess as to what the top is made from would be polypropylene plastic.

  • @mobilemiall
    @mobilemiall 20 днів тому

    I wonder if you could use friction tape like they use on stairs in wintery climates.

    • @TargetForge
      @TargetForge 20 днів тому

      I would image it would be challenging to get a reliable bond to the plastic. Also, many of those products actually use sand in the surface to increase traction. If my nice gun slid across that surface it would likely make me cry...lol. Thanks for the comment!

  • @Riyame
    @Riyame 21 день тому

    Looks like they are only making the Alpha filter I guess. 500 for the filter and 80 for each replacement cartridge... oof.

    • @TargetForge
      @TargetForge 21 день тому

      Apparently Joe is VERY proud of them.

    • @Riyame
      @Riyame 21 день тому

      @@TargetForge So it would seem lol. I am looking at getting a PCP and pump and was doing research on various filters when I came across his. The sticker was quite a shock.

  • @theairgungeeks5106
    @theairgungeeks5106 21 день тому

    Great mod for the shooting table.

    • @TargetForge
      @TargetForge 21 день тому

      Thank you! Feels almost... luxurious! Lol.

    • @TargetForge
      @TargetForge 21 день тому

      Did you happen to notice the shirt I wore at the very end?

  • @gregkirby
    @gregkirby 23 дні тому

    For anybody wanting to know, there are two dowels on the end of the suppressor that if you punch out, you can remove the inner baffles. Perhaps someone with a 3D printer can print some that will go into the stock moderator housing that will perform better.

  • @gregkirby
    @gregkirby 23 дні тому

    For anybody wanting to know, there are two dowels on the end of the suppressor that if you punch out, you can remove the inner baffles. Perhaps someone with a 3D printer can print some that will go into the stock moderator housing that will perform better.

  • @cesarmoura2374
    @cesarmoura2374 24 дні тому

    ola voce envia para o brasil?

  • @precision_Air
    @precision_Air 24 дні тому

    The tank valve gauge needs to show tank pressure constantly and have an adjustable regulator with a secondary gauge showing the set regulated pressure.

    • @TargetForge
      @TargetForge 24 дні тому

      Let me know when you find one at a reasonable price! I'd love to see your video.

    • @precision_Air
      @precision_Air 24 дні тому

      @TargetForge I'm pretty sure they don't make one. I just wish saber tactical would have At least made a live gauge like the original these replaced. And a reg would be a nice touch.

    • @TargetForge
      @TargetForge 24 дні тому

      I have units with dual gauges and ones without. A single gauge still works fine as I simply use a dead head and crack the fill valve if I want to see how much is in the tank. Some manufactures (might have been AirHog), told me they do not recommend dual gauges as it doubles the failure points, I dunno, never had an issue either way. I think a regulator would actually frustrate me as the spread of fill pressures on my guns is pretty wide, it would likely never be set correctly. Now for a guy using a tether, or a single fill pressure, I could see it. That would not be me though. Thank you for your comment!

  • @morgb2321
    @morgb2321 25 днів тому

    Where to get the lubes for this compressor ?

  • @morgb2321
    @morgb2321 25 днів тому

    Where to get that lube kit?!

  • @airgungreenie2844
    @airgungreenie2844 25 днів тому

    Where to buy the seal? Mine is damaged

  • @gregkirby
    @gregkirby 27 днів тому

    Was the barrel already threaded for the moderator?

    • @TargetForge
      @TargetForge 27 днів тому

      I have to ask...Did you watch the video? Lol.

    • @gregkirby
      @gregkirby 27 днів тому

      @TargetForge That's why I asked. I saw you thread the moderator. But what about the barrel?

    • @TargetForge
      @TargetForge 27 днів тому

      In the video I cut the moderator off the plain barrel because it is NOT threaded, the plenum kit comes with a threaded adapter (one of the purple bits I add to the Notos in the video). From the factory the barrel is NOT threaded, hence the moulded on moderator needs to be machined off. I wanted to "save" my Notos moderator so I could use it on any 1/2"-20UNF thread. So, is the barrel on a Notos threaded? No, not as delivered. Can you make it that way? Yes. Can you actually save and repurpose the otherwise "scrap" moderator? Heck yes. Have an awesome day!

    • @gregkirby
      @gregkirby 27 днів тому

      I see. So the shroud is already threaded?

    • @TheDIYMaker1
      @TheDIYMaker1 27 днів тому

      @@gregkirby no.

  • @kapaul1584
    @kapaul1584 29 днів тому

    Is the Vevor the same as the yong heng?

    • @TargetForge
      @TargetForge 27 днів тому

      Personally? I would avoid ANYTHING from Vevor. They are a terrible brand and support is non existent. Check out the tool bear's video ua-cam.com/video/69OHLIKYJb8/v-deo.htmlsi=lpH1Kw4ar9W5C7Gk

  • @jimragan9432
    @jimragan9432 Місяць тому

    very cool!!!!!

    • @TargetForge
      @TargetForge Місяць тому

      Thank you!

    • @jimragan9432
      @jimragan9432 Місяць тому

      @@TargetForge i just ordered the plenum kit. i have a few donnies laying around to try. i wish i had a lathe but now i think i can do it with a dremmel thanks to you.

  • @ajp368
    @ajp368 Місяць тому

    Can you still shoot pellets in it ? I have way too many tins of .30 pellets to switch to slugs. Lol

    • @TheDIYMaker1
      @TheDIYMaker1 Місяць тому

      I have heard that you can absolutely configure this as a pellet shooter, one just did VERY well at EBR in Arizona.

  • @KirkDeshotel-c8c
    @KirkDeshotel-c8c Місяць тому

    I purchased a GX 4 compressor. This is the first time I run it. I set my two needles at 4000 psi I did not hook it up to my gun. I just ran it like that. It only goes up to 3000 psi then it stops pumping, but the fans keep running. Is that normal?

    • @TargetForge
      @TargetForge Місяць тому

      Without seeing the needles in the pressure gauge, hard for me to say. What is telling you it is at 3000psi? Do you have an external gauge to test it? Consider booking a session to look at this with me via targetforge.net We likely will not figure this out through comments on UA-cam.

    • @KirkDeshotel-c8c
      @KirkDeshotel-c8c Місяць тому

      @@TargetForge no I don’t have one of those gauges

  • @even7steven
    @even7steven Місяць тому

    This was an excellent video! I followed it to a T and ended up smoking the 30A DC converter, but it works fine on the 40A that replaced it. 😂😅

    • @TargetForge
      @TargetForge Місяць тому

      Did you use the DC/DC from my links? I have used many of those and not had an issue. The 40A I got actually would not work and failed quickly. Continuous current is ~22A on a CS2 but the inrush on start up can briefly touch 60A but only for a few milliseconds.

  • @spclarryy
    @spclarryy Місяць тому

    My cs-4 is very slow up to about 3000 psi, then it runs normal. It will take 15-20 strokes for the needle to start moving.

  • @health4430
    @health4430 Місяць тому

    damn this one cant put moderator it wont let open the cap

  • @jjssnb3790
    @jjssnb3790 Місяць тому

    Aloha Bill & Aloha Dave awsum video and a beautifully made product 🤙btw thank for sneaking me in there Bill such a beautiful Owl🤙Happy Holidays Gang🙏

  • @TiredMachine
    @TiredMachine Місяць тому

    Very informative Bill Thanks for the info and the link to Black Arts Design web page. Always great to hear from the Airgun Geeks too. Please keep up the great work. Cheers from the desert SW USA!

  • @gumbystown
    @gumbystown Місяць тому

    Can it be painted if you don't like the look of carbon fiber

    • @davidbleakley7740
      @davidbleakley7740 Місяць тому

      If you want to paint it yes. Apply the same methodology as in painting any other material. I prefer wraps over paint personally.

  • @SpYucaipaSoCal
    @SpYucaipaSoCal Місяць тому

    If you buy one definitely get the warranty. They are $37 as of today 10 /18/24 for 3 years. My second unit is starting to run slow after a couple minutes. This is how the first one started to go bad. Second unit is right at 2 years old. And only fills my Marauder maybe twice a week. It sometimes goes a month without being used at all. It fills the gun from 1500 to 2500 in less than 3 minutes. As good as my Yong Heng does. There are better units now for less than $300 now that have built in inverter and automatic pressure shut off for $224. Also I tried repairing the first one and customer service was hard to acquire. This is my opinion nobody paid me to say anything.

  • @FxFanBoy
    @FxFanBoy Місяць тому

    So I tried looking up what the max tank size was for it? It really doesn’t say much. Will it fill a 12L it would be great to replace my omega air charger with something that has product support like yours. I’m looking at the one on amazon that costs $1700.00. Advice? Thanks

  • @health4430
    @health4430 Місяць тому

    today i removed air tube and removed compressor and i turn the regulator only quarter counterwise and put it all back together and las thing push the hammaer spring all the way in and now it shooting H&N field target trophy 14.66 grain at 830fps average and JTS 18.1 grain at 780fps average (24fpe) for about consistent 15 shots before fps start to drops so its solid 2 mags so im guessing if i add this plenum kit i wonder i will get even more fps over 24 fpe lol

  • @josephsaucedo8691
    @josephsaucedo8691 Місяць тому

    A drop block and regulated bottle screems gauntlet 2 for 50$ more better option in my opinion price wise

  • @gajewski13
    @gajewski13 Місяць тому

    what is the ratio of water to coolant(or water wetter)

    • @TargetForge
      @TargetForge Місяць тому

      Follow the instructions on the bottle.

  • @johnnybbgunner2136
    @johnnybbgunner2136 Місяць тому

    Putting in some target time with my pistol. So far it is running very well and feeding most lead and alloy pellets.🤠🇺🇸

  • @n-a3585
    @n-a3585 Місяць тому

    Does anyone know how long it would take to fill a 48ci tank from 1000-3000 psi? Amazon says something around 5 minutes perhaps? Thanks!

    • @TargetForge
      @TargetForge Місяць тому

      The answer attributed to Amazon is not correct. 48ci is roughly 780cc's, a 2000psi delta on that volume will take approximately 15 to 20 minutes. Thank you for your comment!

    • @n-a3585
      @n-a3585 Місяць тому

      @@TargetForge Amazing! Thank you so much for your help!

  • @emersonlovo9829
    @emersonlovo9829 Місяць тому

    Pregunta ese adaptador servirá para la go pro ?

    • @TargetForge
      @TargetForge Місяць тому

      No, no lo será. Incluso si pudiera colocar una GoPro normal, la lente de esas no es compatible.

    • @emersonlovo9829
      @emersonlovo9829 Місяць тому

      @@TargetForge gracias 🫂

  • @jimj.6412
    @jimj.6412 Місяць тому

    Putting that much money in it, why not just buy the Umarex Zelos?

    • @TargetForge
      @TargetForge Місяць тому

      Thank you for your comment, here is your answer: A. The Zelos was not available when this video was done. B. Some of us REALLY like making custom guns and NOT buying something already done. We LIKE creating and modifying. C. My custom Notos is smaller and lighter than ANY Zelos. It is also laser accurate. D. Still no purple Zelos available....LOL

    • @jimj.6412
      @jimj.6412 Місяць тому

      @@TargetForge Thank you, that is all good answers. Enjoy your hobby