Відео

Saved my sanity...thank you

🍿

Is it necessary to flush the factory fill port? My grub screw hex recess is a bit stripped so I've been leaving that port alone over the years of flushing my brakes,

Good lord after replacing the belt we thought we were crazy because it wasn’t working still. Duh! Thank you!!

Witam jaki klucz do korka wlewu oleju do wału napędowego.?

What size of blessed did you use?

it is weird the dealer gave you that oil, because my workshop manual recommends it should be 75W-90 , from what i hear W80-90 would be ok aswell

Thank you! Thank you!

Great video. Had no rear brake after installing Spiegler lines and new pads. Bled the abs with this video, worked perfectly. Appreciate your efforts here, ya done good.

Thanks Kontor for the video. I have an issue and I hope you still monitor these comments. New pads and Spiegler lines on my 04 K1200GT. Bled front left, front right, and back per video. Seemed to work fine. Bike on the stand, front and rear brakes activate with key on and pressing the front hand brake lever. However, rear brakes will not activate with key on or off using the rear pedal. I have not bled my abs unit yet. Is this normal? Thank you for the help.

Sorry... How many oil change for the gear transmission? ...thanks 👌

thanks for the video. Here is where you can improve: The camera work is shaky, making it difficult to see what you're doing.

Why don't you just run a 12 volt battery cables and use the pump to blend abs

Very European friendly, thankyou. My K1000RS SE 2002 was originally from Atlanta America and brought over to Northern Ireland

too bad the I-BMW forum crashed and disappeared years ago.

Good idea with the screws card !!!

Why anyone would remove this stuff is beyond me. Not necessary for virtually any type of standard maintenance.

Thank you for this video!!

Every time I hear a little snap I think , .. there goes the little tabs on that fairing !

Thanks for uploading this! You saved my day!

Excellent

hey man I just took my tank off and it worked great and then it started to leak fuel from one of the rubber hoses... is that normal/ how do i prevent that?

My bike had it’s ABS removed before I got it. My rear brake reservoir is empty but the brake still works.. how? And should I bleed/fill it?

Just got a 1200rs for free! Need more videos on UA-cam to help me with the maintenance, wiring, etc! Thanks for the vid

5 years later and this video is still helpful. My son must have hit the button and didn't realize it. I thought the system was done for. Thanks.

Hi, please, I've bought a BMW K 1200 RS 2005 96kw machine and I'm having a bit of trouble finding the service manual and I need to know what oils I need to replace. Could you advise me and specify and possibly supplement with a specific product? Some sources say that the same oil can be used for both the drive shaft and the gearbox, while others say otherwise. I'm confused about that. 1. Engine oil 2. Oil for the drive shaft 3. Oil for the gearbox Also, I have a few additional questions: 4. What coolant do you use? 5. Air filter 6. Brake fluid 7. Spark plugs Thanks a lot. BTW. thanks for the video!!!

Thank you!

A very useful video, will be tackling this the weekend as I'm replacing pipes. Just one question, where can I download the doc version,(bit easier than balancing my tablet on my bike), the link in the description does not work.

Absolute legend. Done this process myself on my 2004 K1200GT made the wrench just as you described worked a treat with some extra grinding around the 7mm end. Crazy just how wobbly R3 and F3 bleeders where I was frightened all the time one was going to snap off. Doing this myself including the wheel circuits will save me approx £200 every two years compared to the stealers. Thanks for the video.

Nice video and colour of your bike. Wkat is the colourcode ?

Its a pain in the ass and i cussed the engineer loud enough he should have heard me from across the pond!,🤬

thanks, doing a new paint job on my 98 K1200RS and wondered if the 2003 fairing would fit the 98 model (the fairing looks better and eliminates the indicator pods) - Chris

My 2004 k1200rs. Needs a good service. . Thanks

Very helpful video .Can you send me copies of your drawings and or the pics showing the correct order/sequence ,or tell me where you got them from. I can not absorb and memorize🙃 all the information .

Excellent video... thank you!!! Bought a 1999 BMW K1200RS 3/2021 and after riding all last summer and the start of this... I'm thinking WTF was I thinking :(! I don't have a garage, the smarts and or the tools to even do a freaking oil change. Never will I buy a bike again w/ gosh-forsaken fairings :(. Anyone with the skills, brains or money to pay others for service... I'd like to get rid of this bike and buy a scooter w/ no fairings :) Bikes in Lake Geneva, WI

Bought a 1999 BMW K1200RS 3/2021 and after riding all last summer and the start of this... I'm thinking WTF was I thinking :(! I don't have a garage, the smarts and or the tools to even do a freaking oil change. Gotta take hours just to pull the gosh-forsaken fairings :(. Anyone with the skills, brains or money to pay others for service... I'd like to get rid of this bike and buy a scooter w/ no fairings :) Bikes in Lake Geneva, WI

Hey, well done and to the point. Thanks! Hope the knee is doing better.

Thanks for your diligence in getteing the tutorial out.I added Stainless Speiglers to our 04 ABS III and your instruction really helped.It took two full cycles to get the circuits bleed but bike is back together and brakes as good as ever.Don't get the spacer but I can see if your adding new pads all around it could help

I've got a 1999 BMW K 1200 RS (K1200RS) w/ 30k miles +/-, that I bought 3/1/21, and enjoyed many a ride on it over the past 12 months. I'm slightly handy but no mechanic and worse I have no garage or tools at this time. It's got some minor knicks, scuffs on the saddlebags in particular but looks very good otherwise. A previous owner broke off a piece of the fairing, about 1.5" in, and half-assed glued it back on (left side, at the top front corner just below headlamp). After seeing this video I wouldn't mind selling and getting something easy to work on like a KLR or older GSA. My previous bikes were KLR 650, FZ1, ll50 GSA, RT 1150... all but the RT, and current K, were easy to maintain. Hit me up if interested in looking / buying >>> 1999 BMW K 1200 RS (K1200RS) w/ 29k miles, 2500 +/-, Lake Geneva, WI 53147

BLESSED. BE. SIR. TNKS. I AM. RESTORING. ONE. OF THOSE BIKES. FROM 1998..REALY. TNKS. FOR. ALL YOUR HELP😇

Thanks for this. I don't own a K1200 but I occasionally consider one - out of curiosity I did a search for this process as I suspected it was a time-consuming aspect of doing any engine work on this bike. Your video affirms my appreciation for the half-fairing on my Triumph Sprint RS. :-) One standout tip is the use of cardboard screw organizers - genius! Cheers!

THANK YOU! After watching a half dozen 10 minute + videos on how to fix my Genie, your 50 second video did the trick.

Great video at KLVK. Used to see them all the time when I was flying at Ahart Aviation (now defunct).

Hi. Is the sound coming from your module or from garageband?

Thanks a lot for the video. I bought a special bottle instead the funnel and followed your instructions carefully. After 1h everything done, no fluid anywhere on the bike or the garage, just perfect! Cost for the bottle plus the fluid was about equal to having it done at BMW once. Greetings from Germany.

Thanks for the video !

What about using silicon brake fluid?

Thank you . Simple

Lol OMG THANK YOU!!!!!!!

Do you have trouble sending tracks to others, trying to send as a project?