Відео

And this video was 2 years ago. You can find these pcs for $300-$400 on Ebay! Thanks for watching!

@@bradfordskeldorado Thanks dude appreciate the response, i'll sub for that.

@JaredGenesis444 Thank you, sonmuch for the support!

@@bradfordskeldorado I got you fam. Stay killin' it! 💯💯💯

I wouldn't recommend the 3060 just because the amount of power to run that GPU. The 4060 is great and efficient at 110W

A lot of it comes down to preferences in brand or design. Most of the performance is pretty even if there are the same series card

92mm fans work great for the side and the rear if you wanted to replace that one too. I haven't measured or tried to find one above the side fan.

You've only had it for about a week? If that's the case, sound like it could be a manufacturer defect. I would try to contact HP. Possibly try to reinstall your old ram and see if you have any different result.

@@bradfordskeldorado No, Im saying the Rx 6600 did this to my pc, I bought it since june 5th and does what i said above.

So a red light can be an indication of the gpu not reading properly. Have you tried reseating it?

@@bradfordskeldorado Yes, it like i said, it worked for days, i reseated it, its the psu 350 w is not supported for me because the wattage rx 6600 used.

@@bradfordskeldorado No you dont under stand, for me the gpu started working for a couple days, around the 3rd day the gpu kept powering off like the drivers and stuff and i had to put it back on in device manager, after around the 6th day, the gpu just wouldnt work, then it showed a red flashing light signal.

Did you use the same cpu cooler? Your cpu temp should display on your task manager regardless of the cooler you have.

update must of been alil to tight temps are down cooler is rgb and dope first pc i ever upgraded if u need psu dont buy L5 something 800 get the L77487-001 same size and bolt pattern has 350w that comes in and its 500w 80 plus plat works way better looks way better everything is working

@@bradfordskeldorado yeah man must of tightned to tight could get display called my pc guy told him i had no pic but before i took it over i loosened the top just a tad and tightned a tad on bottom left took to pc guys and it booted right up looked at me all crazy lol

but all is good just so u no brad i found a psu the is the same size and bolt pattern has the 350w that comes in it i no u case swapped ur but for future people that ask u tell them to get L77487-001 same size and bolt pattern currently in my victus and its 85 bucks of ebay 80 plus plat but love the vid help me alot im tech savvy but no pro and a console gamer switch to pc my victus has that 500w with a 4060 veetroo lp shadow gskill ram but i think its hindered by bios push 155 fps in the finals

psu is 80 plus plat too man trust me works like a dream my guy

The gpu I used fits perfect and uses the factory power supply!

@@bradfordskeldorado does that mean I could use it or no

@Flipix6000 yes this gpu is great for the victus. The size fits in the case and the power supply has an extra cable that works great for the RTX 4060

@@bradfordskeldorado thank you

I have a short testing an RTX 4060 and its perfect for this pc! Here's is a link for the one I have. amzn.to/3x4UBkL

@@bradfordskeldorado thank you so much

For the gpu you will just need to make sure you have the correct amount of pcie power connectors from the power supply and you will just install the new gpu in the top pcie slot and secure it with the mounting hardware and plug it in! Let me know of this isn't what you needed

@@bradfordskeldorado update.. swap went amazingly well. thank you for this video my dude

Awesome! Thanks for watching!

70 under a load is perfectly normal. 70 for cpu under a load is normal too with a passive cpu cooler too.

What ram did your computer come with? So you want a white mobo, cooler, case and gpu?

@@bradfordskeldorado it came with 16gb ddr4 but I was planning on possibly buying dd4 32gb corsair white ram

@@bradfordskeldorado I don't need a new gpu my 3060 is fine and works great

Ok, i can post some links for a new case, mobo, ram, and aio that should get you going to have a white pc build. I'll try to keep it under $500

@@bradfordskeldorado that was what I was planning on doing I got tbe price down to 500 but don't know if I could get it lower

I believe it will. I had room for a bigger size and I'm pretty sure I have had another person mention adding a 92mm fan in the past

@@bradfordskeldorado oh ok thanks! I want to get this pc for like a workstation that I will have to leave on continuously for a long period, and the pc will be in a small room, so I’m trying to add as much cooling and airflow as possible

Yes it can. I have a 92mm fan installed on the side mount.

@@CargoPantsLuvr ah alright man thank you

It is smaller but would take up some room in a carry on. The case is 6" deep x 11" wide x 13" tall

@@bradfordskeldorado thanks appreciate it

Nice! How are the temps in that?

Rtx 4060 all day long!

Ok thank you

@@bradfordskeldorado also how much fps in Fortnite

@Teyto7 any time! Let me knownif you have any other questions!

@@bradfordskeldorado how much fps will it get in Fortnite with rtx 4060

Yes sir. I did a full vid reviewing this pc and cs:go was one of the games I tested. CS2 isn't much different in performance.

It doesn't help a lot. This case is not designed for a lot of air flow but I will say you can fit a 90mm fan instead of the 80mm I tested. This short was made because people asked how to install a fan on the side so I just wanted to show that you could to help push some extra air. May help to adjust your fan speeds.

I will say that a case like this is easier to upgrade parts and add proper cooling. This is if you already have the pc and was to spend about $300 to get it swapped over.

The rear fan mount is 92mm. The side fan mount supports up to 92mm. The OEM cooler is 80mm fans.

@@CargoPantsLuvr thx so much that really helps

I recommend running the DDU from GURU3D.COM and uninstall the display drivers. Then reinstall amd adrenaline and the current drivers.

@@bradfordskeldorado I’ve done that twice then the adrenaline software won’t open after the initial time it opens after install

I honestly prefer nvidia. Amd has given me issues every time updated drivers. Any time I ran into this I would continue to uninstall and re-download the program. Are you doing the auto driver or going to the website and downloading the specific driver for the rx6600?

I’ve done both but I’m not sure which is the best one to download…

There are 4 usb ports on the back. I believe 2 2.0 and 2 3.0 ports

@@bradfordskeldorado Thanks!!

Thanks for the feedback. It is primarily for those that have been asking what it would take to change the case so I figured I would make a video vs constantly answering the question in comments 🤣. I appreciate you watching and glad I could provide something for you. Let me know if you have any other questions! Have a great day

Plug and play. Just make sure youbhave internet because your login pin may need to be reset. It's a simple task but if you're using wifi and the new mobo doesn't have wifi then you'll need to hard ware it.

You've done a lot to that thing! I bet it runs great! Did you find an HP power supply or an aftermarket option?

@@bradfordskeldorado I found an HP power supply on eBay.

Thanks for taking time to watch and thanks for subscribing!

If it's an aftermarket motherboard. Look up the manufacturer site and search software, or Drive download. There should be a wifi driver available

@@bradfordskeldoradohow do I download the driver with no wifi

@@bradfordskeldorado I got the same motherboard that was in your video

Do you happen to have an ethernet cable you can plug into pc to temporarily have internet and download it?

The motherboard comes with a set of hardware. The case c9mes with standoffs to mount a motherboard.

Nice! For the price, it's a great deal! Do you have any plans for it in the future?

@@bradfordskeldorado id like to upgrade graphics and the ram sticks

@neongamin-ok8qb Crucial makes a great kit that's specific for the Victus, and I highly recommend the RTX 4060 for a gpu! amzn.to/4dubUfv <gpu amzn.to/3y3xnvt <ram

@@bradfordskeldorado ok ill check into it ty

support.hp.com/us-en/document/ish_4123786-2338478-16 The second section shows you can update the bios from within the bios. Just hit the "delete" key when you're HP screen comes up on boot up and there should be an option to update it from HP.com

@@bradfordskeldorado thnx

?

Is it a blue screen? When you select continue to windows 11 does it take you to your login?

@bradfordskeldorado it said windows 10. But i figured it out turns out the hp victus M.2 was improperly seated in the new motherboard

@@mariomontana74 I see. I'm glad you got it figured out!

You said it was a 13 gent i7 with ddr4?

@@bradfordskeldoradowould the ASUS rog strix b55o -f work?

No, that is for an amd cpu. If you need an intel you'll need something like a z690. If your pc has ddr4 ram then this motherboard would be good. amzn.to/3UqnYWj

Is it good can it run games ?

@@Hazza_gaming ye it can

@Hazza_gaming I wouldn't say like high-level games on high settings I have them on low like fortnite I have it on performance mode so I get more fps

Ok thank you

The size and shape of the motherboard with the usbs on the front will prevent it from fitting. I also, don't know if the holes will line up with a different case. Also, the power supply from the victus won't mount in a normal case. The power supply and the hp motherboard are meant for each other so if you change one, you have to change both

@@bradfordskeldorado okay that makes more sense, in that case would i be able to just put a 6750 rt in the original case? Im not sure if itd actually fit i saw a video of someone putting in a 6600 and struggling to make it fit

I love the look of the bottom fan on the H5. Another I would like to try out would be the H6

Absolutely! I have a short testing the 4060 on this pc and it's my recommended pick for this pc. I have just had quite a few people asking if it was possible to swap it and what it would take. Realistically l, now you can get a @cyberpowerpc with a 4060 and 16gb of ram for $800 so it's a better deal than buying a victus and doing this change.

I thought about getting a case with a swing open side panel so I could still access the front USBs. 😂

@khoward1033 it's kind of odd how they would integrate that into the case and mother board vs having a hub and wire 🤣. I like the convenience of having the many usbs on the front but that can't be efficient for manufacturing over an matx sized motherboard. These are great pcs in my opinion but limited to upgrades lol