Відео

What year SP?

Does the fuel quage and ecerything work also?

What size are they

Where did you get that speedometer setup? I have an 1987 fourtrax 250 I am rebuilding right now. Would be cool to add that

Make a video on how to fix it when not working pls

Where did you buy those tires from? I got the same wheeler and I need some new ones that will do good in mud 😂

I feel you I have the same quad

What’s the display off of?

Yes

Quick question, does the hour metre record minutes/hours when the bikes engine is on but idling or only when u give it power and Ur moving ?

What if I wiggle the starter solenoid connection and it starts up would that be the connection to the solenoid

Make a sofa and a satnav that u can watch netflix on

I have a gas bike and my spokes have been ripped out but i cant find a hub for the adapter mine is mostly straight than it curves at the very end do you know if one like mine could work or if i need a new hub i actully had spokes break with out the hub mine also twisted the bolts holding the sproket in i have 3 of the bolts at 90 degrees

Yo I found you from tiktok you and the sunf tires

I did this so i can see after building it will work

That valvoline ATV oil is good stuff.

🥶

How deep is that😮

Sorry

Do I need to pump the brakes or just do what you did?

You ever figure this out ?

does contct cleaner work, instead of break cleaner?

When you spin the wheel in the clutch in or no?

Probably the most street 250 I’ve seen

where did you get the parts

Ive used mobil1 10w30 car oil in my 2022 honda trx90 For 2 years. Did an oil change. Doesn't burn oil. What you are really doing is slowly wearing down the clutch not really the hole engine. The top and bottom ends of the engine are fine because you have the Molly. I ride this ATV almost everyday and I'm not feeling any signs of clutch slippage when I'm driving it. For being a 90cc, I don't think the engine has enough torque to make the clutch slip. Most of the time my little siblings ride it at quarter throttle. 👍🏻👍🏻

I swear hondas are indestructible. The sound of a honda 4 stroke is ingrained in my memories forever.

Comb over shift

Did you have to do any modifications to fit the big red side panels ?

Lol so true 😂

Kind of want to see what it look like outside.😊

Does this work on the kawasaki kfx700? Also, does the water temperature sensor and rotating speed sensor need to be purchased separately?

Did the tip, holding the ignition and tapped the starter, fired right up.

I am installing a speedometer on my quad and was wondering what the anode and cathode was for and I am wondering why they didn't label the switched power and ground

Only thing I cared about or needed to see was how the magnets attached. You didn't address that and said they would likely Fall Off?, but they hadn't yet. So is it using double-sided tape?, JB Weld, or what? Frankly they look like they're meant to attach to Spokes so..... I still have no idea. And do you program your tire diameter for an accurate reading? I'm sure once I get it it's easy to figure out but I don't want to spend money if it's something I can't really use. Otherwise I'll spend a little more and go with GPS. If it's just double-sided tape. Then JB Weld would likely be better. It's capable of holding on through all types of extremes. Just don't have a clear I idea. thanks anyways.

nice

Do you turn it to decrease first and then increase or increase then decrease

Did you hook up the red and black jumper cables? Different colour ones or the same colour?

I've seen u on tiktok

Hi! If i give you a email you can help me to connect to my gilera dna? I start to go mad! I have the same but i cant connect! Cabling is so hard!

Thanks for this post. Simple easy and straight to the point. 👍👍👍

Great video. Quick informative and to the point. I can’t stand these guys that spend 10 mins talking and not even getting the fix on camera. No waste of time here. Thanks.

How do you take the small bevel gear off

You don't need an air filter and that foam is 15 bucks and you can buy a nice looking k&n style for about 8 bucks

YOU MAY NOT NEED NEW PADS!!!! I've watch several of these videos of changing the clutch pads. In all the videos the pads seem stuck in the clutch pad gear. It seems to me if they're stuck in the gear, the spring loaded outer sheet metal disc is not going to be able to push the pads against the inner flywheel disc. This being the case, the only friction you're going to get is against the outter sheet metal disc and it's no wonder the clutch is slipping. I have not tried this but most likely you could remove the clutch pads, sand the edges so they fit in their recessed slots easily, button it up and it would run fine. There's a good chance they're not wore out but just stuck in the gear and can no longer be pushed against the inside flywheel. ; )

I dont know about making it more fuel efficient....if you increase air-flow, you can increase power, for sure, but its because you also must increase fuel usage to compensate for the added air-flow, which means, in four-stroke engines anyway, that you get a mix with a stronger explosion. what could offset that is how that power is used....to carry you farther, faster, or to do burnouts and drag race with your motorized bike. to truly achieve better fuel consumption, adjust your gearing along with tweaking air flow.

Best jet ski out there is that seadoo XP generation, you go to any jet ski race you'll see them

Seadon't

You just need to weld the adapter to the hub and it will never slip off again. The adapter is eternal, and the stars can be changed as much as you want.

Why does my bike squeak when I try to start it up