- 10
- 7 243
MadSpastic RC
Приєднався 23 лют 2013
Rc bashing focused channel.
Team Corally Kagama Big Sends
I forgot to mention I also threw on 6s ARRMA shocks and a GPM steering assembly. I say it every video, but I am still very happy with the handling and durability of this rig.
Переглядів: 98
Відео
ARRMA Kraton 6s EXB Torture Test
Переглядів 195Місяць тому
I didn’t intend to go this hard on it, but it took the abuse very well.
Team Corally Kagama Takes Hard Hit
Переглядів 1332 місяці тому
The GoPro doesn't do a good job showing how big of a fall it took. It took no more than 5 minutes to beat the cvd straight and it was back to running again.
Traxxas Rustler Ultimate Durability Test
Переглядів 2 тис.3 місяці тому
Pretty happy with it so far. I think for $529 it should have come with a hardened steel pinion, and a heatsink.
ARRMA Kraton 6s EXB vs Team Corally Kagama
Переглядів 8563 місяці тому
I'm still new to editing videos, but I think this one turned out solid. Hope this video was helpful. Leave a comment if you have any questions or suggestions. How I strengthened the rear arms was by cutting steel 4mm punch pins to the right length and using those instead of the stock or any aftermarket hinge pins. They seem to be way stronger so far.
Breaking New Kraton 6s EXB & Kagama
Переглядів 2945 місяців тому
I am a little disappointed with both rigs this video. Sure it looks like the kagama took the harder hit, but we have launched about 8 or 9 rigs on that jump before. And before now, my typhon 3s was the only other one that had been damaged from that jump (bent shocked shaft). Let me know if y'all think I am being too hard on them. Thanks.
New ARRMA Kraton 6s EXB Skate Park Bash
Переглядів 7255 місяців тому
First break on this rig. Didn't look like a bad landing, but plastics can only take so much in the colder weather. Still very impressed with it so far. I plan on taking it to a bigger skate park and pushing it's limits in the future.
Team Corally Kagama Bash Gets Cut Short
Переглядів 4586 місяців тому
Was surprised to see that nothing was broken or cracked, just a lost wheel nut. They were loctited on so I am not sure how one came loose that easy...
Bashing New ARRMA Kraton 6s EXB Big Sends
Переглядів 1,9 тис.6 місяців тому
Everything held up great. No breaks, very happy with it so far.
Team Corally Kagama Skate Park Bash
Переглядів 5346 місяців тому
The wing is the only thing damaged this video. So far pretty impressed with the durability and handles great.
Massive air wow!
It’s landing nice and soft
I've been very happy with the suspension so far.
Never had any other trucks than arrma oh maybe 1 sledge but still sick sends bro pleasure to watch
Thank you!
Your having to much fun! Nice job. You build that ramp? Probably say in another video but I just came across your channel.
Appreciate it! The ramp is a Fresh Park quaterpipe I had in storage from when I used to skate.
Nice sends, I just order tons of ADU for this rig. I love M2C but they are crazy expensive.
Thanks! I agree, I love to buy American if I can, but their prices are insane, but I still buy from them from time to time. I have a lot of adu stuff coming in too that I'm looking forward to testing out.
@@MadSpasticRC The channel DO RC got tons of ADU parts on the Kagama and beat it up. All the parts held up, no bent parts. I may go with the M2C SHOCK STANDOFF KIT because it’s one piece, thick harden steel. I did get the ADU stand-off, but they use a hex screw. It probably won’t hold up, but it was cheap.
@@jagergerg9771 Have you had issues with your stand-offs or you just upgrading them to be safe?
Perfect skate park
I like the Kagama, it’s different from the usual. Just got the roller, going to upgrade it from the start.
Team corally are better build than the ARRMA! My Asuga takes a beating !
I do like the design a bit better on the Kagama, but I find them both to be very durable. Along with my XRT, these 3 are my favorite truggy bashers that can all take a beating.
Team corally is the best bang for your buck !!
I do like how the EXB comes with more aluminum parts, which (to me) gives it more value for your money, however the Kagama can take as much of a beating without the extra fancy parts, which really shows how well TC designed this truck.
Just got mine an hour ago. It's a little beast.
Been happy with mine so far, it's warmed up since I made this video so I had to add a heatsink and fan to the motor.
😊[Arkdw,biqd]…?!
Nice sends . Has anything broke on 2tf high lawn dart ? Man , it was depressing @ 5days old, still is kind of
Mine needs a front center dogbone but it still runs . Looks a little wobbly in the cup . I know it will eat away the cup if I leave it there slightly warped . Mines a 6s BlX v5 amd the servo went and that shaft from the tiniest lawn dart from a tiny mound of dirt . 😂 I m giving it another chance . Servo is in
Cool , I made my own version of the rustler ultimate by adding some of the parts onto my existing car. I also put in a spectrum motor and esc , quite happy with it , pulls wheelies with the 17 tooth pinion
Right on! I've been considering going up to the 17t, I might order one in the future to see the difference it makes, but so far I'm really happy with the 12t.
Hello! how do you play with the throttle trigger like this, it can cause overheating, because every time you press the trigger, the capacitors charge and discharge very quickly Just as an idea
I've been asked about that a few times, idk why I do it. I just think it's muscle memory at this point. If I end up cooking a motor I'll look into trying to break the habit, but I haven't had any issues so far.
Today my arrma Kraton 6s v5 brand new 4 days ago acted up this Sunday after running 4 s , not hard at all . Some speed runs , some grass , very little dirty gravelly stuff . I stopped to let a dog and when I came back to the car I heard the start up noises and it wouldn’t co pledge the cycle . Seemed like the servo couldn’t find center and then after a couple tries all together quit . Wouldn’t turn on . But if I have the remote off , the car powers up like normal sounds and beeps . Then when I turn in the transmitter and try to go right or left the fan slows like it’s accepting a signal or power but no control whatsoever , no throttle . I tried to reset it but I couldn’t get a green flash . I don’t think it’s the esc but maybe it is . Seemed like it couldn’t get past the steering part of startup to move on to throttle . Can someone offer some advice ? It has to be servo or esc or controller ?
Did you buy it online or from a hobby shop?
Finally a video of the blue one. Thanks bro things a beast
💭🤔Out of 12:42 the Kagama only gets about 3,1/2 what’s up with that?🤨
I think I started bashing the Kagama a little over 7 minutes into the video, I would have sent it more, but I didn't have any spare hex hubs. You're right tho, the Kraton did get a little more screen time in this video.
Hey MadSpastic😎 have you got some Arrma 6s 17mm wheel nuts🧐 spare 😳😳 those are the cheapest and easier way to lock your wheels on and forget about doing it On the Kagama
I cant remember if they were ARRMA nuts, but they were serrated and I used blue loctite. I think once I get stronger hex hubs the issue should be fixed.
If you had to choose. Which one would be the better one you would keep?
Sorry for the late response, I like them both in different ways. I think the Kagama is more enjoyable to bash because it drives like a truggy, but once you get it in the air it handles like a stunt truck. However I think the Kraton is definitely the better value, once you upgrade to stronger hinge pins it's good to go and will take the abuse. The Kagama is a durable basher out of the box, but I have already put some money to the side for a few upgrades it's going to need (better tires, aluminum bulkheads, and stronger wheel nuts/hex hubs). I know I didn't pick one over the other, but I hope this helps!
@@MadSpasticRC vielen dank
Those both broke pretty easy, especially the kraton. Makes me want to go with the Kagama, what do you think?
It's hard to say. So far in my experience the Kraton only has one weak spot, which are the rear arms and there isn't really an upgrade to fix that. For the Kagama I have broken a knuckle off camera, which you can upgrade and fix, as well as the bulkhead. The chassis on the Kagama also bent from that hit, but I wouldn't call that a break, I was able to bend it back.
I guess the short answer is the Kraton is better out of the box, and the Kagama will be more durable if you want to put money into the upgrades. I hope this was helpful!
Very Nice! I like how you control the car in the air, but can I ask you why you have this strange (for me) habit of playing with the remote control trigger like that?
Lol, I'm not sure honestly. I never realized I did that until I started making videos. I thought it was kinda odd too, but it's just muscle memory for me now.
Great flipping at a perfect launch spot! Cheers!
Appreciate the positive feedback!
What ramp is that?
Freshpark Quater Pipe
How much runtime will u get till lvc MadSpastic👋🏿😉
40-45 minutes I think
Ahhh u got it 🤯🥳🥳🤩😎
Think u could have a triple back flip outta him if u quick on throttles 😏
Which you prefer This or Gama Mad👊🏿
Not sure yet, haven't had them long enough.
My Punisher wheelnuts also came loose first time out. Fixed it with blue threadloc, it's been fine since.
Ive started using serrated wheelnuts with blue threadloc to be extra safe, so far so good!
Just bought the Muraco. Swapped out for Armma wheel nuts. Problems with shock ends and rear upper control arm. That was light bashing. Not off to a good start
Corally make some nice cars and have good designs from what I see I have not had one tho but all they need to do is make there wheel nuts serrated I recommend just getting some arrma one’s probably fit
I'll have to try that, I have a spare set from my outcast, but I haven't been able to take it back out yet. The weather here has been awful.
Yes the stock hex nuts are non-serrated. They don’t grab the plastic and come off. Happen to me also. Get a set Arrma or M2C hex nuts. 👍👊 🤘🏼🤘🏼
Yeah where I am too it’s snowy and cold and a bit rainy and muddy so I’m not bashing but really want to
Nice bash! I noticed you have both this new exb and the kagama. What do you think about them? Which is more durable? Thanks!
Thanks! It's too early for me to form an opinion on which is more durable yet. The weather where I live has been awful and I haven't been able to run the two much. So far I'm liking the air control more on the Kagama and I like the suspension setup better on the Kraton. I haven't broken anything major on either yet. Only broke the wing on the Kagama, and the servo in the Kraton was busted out of the box, but my hobby shop took care of that.
AR310449 Arrma limitless wheel nut is what will help💯 These have like teeth on one side that bite into the wheel plastic and help stay put 😎
Badass sends dude! More balls than me lol i always break shit over 15-20 feet up! M2C chassis in the mail though 😜
Lol thanks! I've been trying to get back out and see if i can send this thing higher or take it to a skate park, but the weather has been terrible. I haven't had any issues with the metal chassis yet, but if I do I'll being looking into M2C as well.
Very cool man! Good control and I think it’s easy to put max level puch..
Appreciate it! I just need to get around to updating my programmer and I should be good to go.
@@MadSpasticRCyou don’t need programmer or to even update it. Use your ESC to change your settings.
Nice air 👌✌️, subbed
Thanks! I just got my K6 exb in but it's been raining all week where I'm at. Hopefully I will have a video of that one soon. Maybe do a comparison.
@@MadSpasticRC ✌️
How have your temps been with the Max8? Sweet bash!
So far they have been fine, it was a little cooler that day so when summer rolls around I might need to add a fan.
Nice video . The kagama is a beast
Thanks! Ive been really impressed with it so far.
@@MadSpasticRC mine feels like a outcast and kraton fused into one
Fancy bash pal😎 is this stock 😁 you also may be able to just relocate the mount on some of the remaining holes
Appreciate it! Yes its stock, I bought it as a roller and installed a max8 combo, flash hobby servo, and a dumbo receiver. It's been a great rig so far!
@@MadSpasticRCit handles so well 💯💥🤩🤩