Turbo Malibu V6
Turbo Malibu V6
  • 53
  • 981 021
Holley Pro Dash 12.3 - Create Analog & Digital gauges on a new background
This video assumes that you have acquired or created an ALL-NEW background for your Holley Pro Dash. Once you have one loaded on a USB drive, you can follow this video to set up the gauges on it.
Переглядів: 32

Відео

What's on my Holley Pro Dash 12.3"
Переглядів 14814 днів тому
I go through all the different dashboards on my car showing the way I have them set up. #holley #prodashboard #holleyefi #gbody
Turbo Malibu
Переглядів 2282 місяці тому
#malibu #turbocharged
Dual Fuel Injected Buick Grand National Engine
Переглядів 1523 місяці тому
Way back in 2004, I designed a dual fuel system for my car. I designed it to automatically switch from 87 octane pump gas to 116 high octane race gas. It's a system that does not allow the fuels to mix. Forget high dollar aftermarket ECM's....this can work with factory ECM's regardless of the engine size. It still works flawlessly after all these years. Video of it switching... ua-cam.com/video...
Turbo Malibu on Cruise Control
Переглядів 853 місяці тому
Turbo Malibu on Cruise Control
PADDLE SHIFTERS - G-Body with a 4L80e Transmission & Holley Dominator ECU
Переглядів 1983 місяці тому
DETAILED INSTALL HERE - www.turbomalibu.com/malibu-paddle-shifter.html Here's a short, to-the-point video about how I made paddle shifters to work on a stock steering column. This is a mid-80's GM steering column on a G-Body car from 78-88. I'm sure other GM columns are exactly the same so this procedure will still work as long as your steering wheel has enough room on the back side of it to al...
HOLLEY Pro Dash - How to set up SHIFT INDICATOR POSITIONS.
Переглядів 2854 місяці тому
Follow this easy software set-up procedure to get them working. A 0-5V sensor must be installed on your shifter or on the side of your transmission.
4L80e - G BODY SWAP - How to Column Shifter Linkage Set up
Переглядів 5604 місяці тому
Here's my solution for hooking up a column shifter to a 4L80e in a G-Body. #gbody #4l80e #montecarlo #grandnational #cutlasssupreme #grandprix #malibu
Holley Dominator Dual Boost Solenoid Response
Переглядів 347 місяців тому
This DEMO shows the responsiveness of the wastegate solenoids controlling *commanded* dome pressure. I have it set up using the throttle position sensor to increase and decrease the pressure on top of the wastegate. A steady 100psi of air pressure is coming from a C02 tank. You will not be using a *commanded 100psi* of dome pressure to control 20 pounds of boost in your engine. I'm using 100psi...
1978 Malibu - Turbo Intercooled V6 - Rear View
Переглядів 302 роки тому
1978 Malibu - Turbo Intercooled V6 - Rear View
Wide Open Throttle
Переглядів 9172 роки тому
Wide Open Throttle
Turbo Malibu V6 - 6.59 at 107mph - Dragy Pass
Переглядів 2272 роки тому
Turbo Malibu V6 - 6.59 at 107mph - Dragy Pass
3800 V6 FAST START Ignition RETROFIT on a Grand National Engine
Переглядів 1522 роки тому
3800 V6 FAST START Ignition RETROFIT on a Grand National Engine
Buick Turbo V6 with late model FAST START Ignition System
Переглядів 1532 роки тому
Buick Turbo V6 with late model FAST START Ignition System
FAST START IGNITION on a Turbo Buick V6
Переглядів 2933 роки тому
FAST START IGNITION on a Turbo Buick V6
Dual Fuel Injection - Automatic Switching - Turbo Buick V6 nudging 30psi of boost
Переглядів 2704 роки тому
Dual Fuel Injection - Automatic Switching - Turbo Buick V6 nudging 30psi of boost
FYI - L5P Duramax MPG while EXHAUST REGEN is active. 75mph Cruise - 2019 Denali HD - 2500 4x4
Переглядів 10 тис.5 років тому
FYI - L5P Duramax MPG while EXHAUST REGEN is active. 75mph Cruise - 2019 Denali HD - 2500 4x4
FYI - L5P Duramax MPG at different speeds - Not Towing - 2019 Denali HD - 2500 4x4
Переглядів 6 тис.5 років тому
FYI - L5P Duramax MPG at different speeds - Not Towing - 2019 Denali HD - 2500 4x4
Vector Robot - No Music - No Editing - Just sit and watch what he does.
Переглядів 7 тис.5 років тому
Vector Robot - No Music - No Editing - Just sit and watch what he does.
Snap On VERUS Wireless - Upgrade Your WiFi Card for FASTER SPEEDS!
Переглядів 2,1 тис.6 років тому
Snap On VERUS Wireless - Upgrade Your WiFi Card for FASTER SPEEDS!
Snap On VERUS - How to install Windows 7 & Diagnostic Suite 17.2 on your older VERUS!
Переглядів 20 тис.6 років тому
Snap On VERUS - How to install Windows 7 & Diagnostic Suite 17.2 on your older VERUS!
Snap On VERUS Wireless - 1 Minute Boot-up Into Diagnostic Suite using Windows 7 Embedded!
Переглядів 5426 років тому
Snap On VERUS Wireless - 1 Minute Boot-up Into Diagnostic Suite using Windows 7 Embedded!
Snap On VERUS Wireless - 90 Second Boot Up into Diagnostic Suite with Windows XP
Переглядів 8676 років тому
Snap On VERUS Wireless - 90 Second Boot Up into Diagnostic Suite with Windows XP
Snap On VERUS Wireless - 90 Second Boot Up into Diagnostic Suite - Windows 7 Ultimate
Переглядів 4127 років тому
Snap On VERUS Wireless - 90 Second Boot Up into Diagnostic Suite - Windows 7 Ultimate
[4K] Snap On VERUS Wireless - Windows 10 Pro - 24" Touch Screen
Переглядів 4,8 тис.7 років тому
[4K] Snap On VERUS Wireless - Windows 10 Pro - 24" Touch Screen
Snap On VERUS Wireless with Windows 7 & Windows 10 installed
Переглядів 5 тис.7 років тому
Snap On VERUS Wireless with Windows 7 & Windows 10 installed
Damn! That KUKA is fast! - 55 Seconds from start to finish
Переглядів 25 тис.9 років тому
Damn! That KUKA is fast! - 55 Seconds from start to finish
1978 Turbo Malibu - DYNO 555HP 517TQ
Переглядів 7039 років тому
1978 Turbo Malibu - DYNO 555HP 517TQ
1978 Turbo Malibu - DYNO 600HP 530TQ
Переглядів 8129 років тому
1978 Turbo Malibu - DYNO 600HP 530TQ
1978 Turbo Malibu - DYNO 580HP 579TQ
Переглядів 4919 років тому
1978 Turbo Malibu - DYNO 580HP 579TQ

КОМЕНТАРІ

  • @itskamel
    @itskamel 7 годин тому

    Is this possible to do straight to the Pro Dash?

    • @TurboMalibuV6
      @TurboMalibuV6 6 годин тому

      Yes. The dash has a 5V supply and a sensor ground. You can configure the input on the dash itself using input io.1 through io.13. Just scale the sensor in the settings like in the video. Then you can make a gauge to show on the dash.

  • @ONEG360
    @ONEG360 День тому

    Thanks!

  • @nz715
    @nz715 2 дні тому

    Video on how you setup the sensor?

    • @TurboMalibuV6
      @TurboMalibuV6 2 дні тому

      ua-cam.com/video/wQzRWogXpeg/v-deo.html

    • @TurboMalibuV6
      @TurboMalibuV6 2 дні тому

      1:20 also shows you what the settings are for setting up the INPUT in your ECU.

  • @seanadams9924
    @seanadams9924 4 дні тому

    Nice Camera work.

  • @parsnipdream
    @parsnipdream 6 днів тому

    My grandfather is rolling in his grave laughing at you new age country people with your fancy pants truck. bet it even has an espresso machine.

  • @seanadams9924
    @seanadams9924 14 днів тому

    That is Awesome!!!

  • @gregzmanson
    @gregzmanson 24 дні тому

    Very smart and clever way to add paddle shifters to an G-body..

    • @TurboMalibuV6
      @TurboMalibuV6 23 дні тому

      I'm an expert at over-complicating stuff with additional costs and labor to get things to work like I want. I should stop thinking out-of-the-box so much. 😅

  • @maradallibya5791
    @maradallibya5791 Місяць тому

    Does the relearn free or not on this tool I ve bought a used verus edge 23.2 And when i tried to do the relearn function its asked for wifi connection And i could not connect and the massage Restrict appeard

  • @MarkVanWey
    @MarkVanWey Місяць тому

    You are not a "car guy". You are an automotive artist.

  • @michaelchambers9971
    @michaelchambers9971 Місяць тому

    Brilliant !

  • @District_57_Toastmasters
    @District_57_Toastmasters 2 місяці тому

    Smooth, man. Always liked the looks of this car

  • @212rain
    @212rain 2 місяці тому

    Cool car. What is it?

  • @wattsperformance
    @wattsperformance 2 місяці тому

    This is sooo cool!

  • @caplife3558
    @caplife3558 2 місяці тому

    One of a kind special built not brought car.

  • @caplife3558
    @caplife3558 3 місяці тому

    Whats your plans with her now? Do you take it to car shows ?

    • @TurboMalibuV6
      @TurboMalibuV6 3 місяці тому

      I've done a few car shows with it when I restored it back in 2005. It's showing it's age now as far as how clean it is. I'm doing a drivetrain upgrade at this time. Engine and transmission. Hope to get upwards of 800hp to the rear wheels. That's not a lot by today's standards...even with a turbo V6.

  • @caplife3558
    @caplife3558 3 місяці тому

    You got me inspired to build something like your car , came across your video a while ago when your parents were driving with the turbo 6 in it . Nice to see you still have it

    • @TurboMalibuV6
      @TurboMalibuV6 3 місяці тому

      That was long time ago. I've had the car since 1986. It's been though some good times and some bad.

  • @michaelbradley1137
    @michaelbradley1137 3 місяці тому

    I just popped a chub! 😍

  • @GodlikeGTZ
    @GodlikeGTZ 4 місяці тому

    Holy shit! Nice setup

  • @dandan821
    @dandan821 4 місяці тому

    Can I still update the software with out changing the windows because the windows can’t be changed to windows 7 or 10 so all I’m asking can the software be updated to 17.2 with out changing the windows?

    • @TurboMalibuV6
      @TurboMalibuV6 4 місяці тому

      No. The only way I've heard is if one of the old dealers didn't sell a copy of the 17.2 with the REQUIRED key. There could be someone out there in the software programming field that could hack the software and not require the key to install.

    • @hotpackjay
      @hotpackjay Місяць тому

      @@TurboMalibuV6unlikely, snap ons cryptography methods and embedded security measures are pretty damn tight. Remember, they charge the most. They can afford to have beefed up security. If your tools already bricked I don’t see why trying isn’t an option!

  • @TurboMalibuV6
    @TurboMalibuV6 4 місяці тому

    I can't believe I have 14K views on this video. There's literally no content in it other than me going around in circles. However, when I posted this video 11 years ago, Google was paying me for placing ads on it, so I did get some money out of posting it. Since then, Google took the revenue away from us unpopular channels so I make no money at all on any of my video's anymore due to "lack of subscribers". Companies like to "hook you" and reel you in when they're a growing business and when THEY'RE in need of customers. Then, when they reach their goal, they cut the little guys off. Rant over.😁

  • @joefair3391
    @joefair3391 4 місяці тому

    How did you get the OBD2 engine to play nice with the OBD1 car?

    • @TurboMalibuV6
      @TurboMalibuV6 4 місяці тому

      I used a 1999 Pontiac Bonneville SSEi as a complete donor car. It's using an OBDII ECM from the Bonneville. I took the entire drivetrain out of it (including the OBDII engine wiring harness) and adapted the harness to the LeSabre under-dash harness.

    • @joefair3391
      @joefair3391 4 місяці тому

      @@TurboMalibuV6 that makes sense. I hate electrical work, otherwise, I have an itch to L67 swap a GM A-Body. Ideally an AWD Pontiac 6000.

  • @irvingferginspud2070
    @irvingferginspud2070 5 місяців тому

    I have this exact model. Over the years I have had to replace the starter twice, The gear at the bottom of the steering shaft (because I left it in the weather and didnt grease it) re-attach the wiring to the PTO because i let it get tangled in the belts.. three batteries. and now the Differential is making a popping sound it reverse. I think its jumping teeth. Oh im still on the original drive and deck belts. And The Kohler engine starts easy never had a moments problem with it.

    • @TurboMalibuV6
      @TurboMalibuV6 5 місяців тому

      The popping you're hearing is the reverse engagement coupling. The tips of them get rounded off and then it will slip out of the mating coupling and then re-engage in the next groove. That's the pop you're probably hearing. I took a die grinder and shaved them both enough to remove the rounded edges. Also, the forward one also needed the same thing done in mine. On top of that, they really don't engage very deep anyway. I still have my mower but I only use it to tow my utility trailer around the yard.

  • @tyreegreen1496
    @tyreegreen1496 7 місяців тому

    👍

  • @ClutchKickerNation
    @ClutchKickerNation 7 місяців тому

    cant download the win 7 17.2 starter file any chance you could uploade a new link

    • @TurboMalibuV6
      @TurboMalibuV6 4 місяці тому

      drive.google.com/drive/folders/12-nxEfjC5ULZoRpQWHbcL_1faWn-Qnll?usp=sharing

  • @austindove2320
    @austindove2320 7 місяців тому

    Where did you get those rims? With the spinners?

  • @WiPri0371
    @WiPri0371 9 місяців тому

    I used to work at Michelin. We had these exact same robots in operation before I left. But it wasn't for anything but repetitious motion. They cleared out a whole dept. Went from 25+ ppl to less then 5. Yay progression. 🤨

    • @ElvargMovies
      @ElvargMovies 8 місяців тому

      Which Michelin Plant? In Germany?

    • @WiPri0371
      @WiPri0371 8 місяців тому

      No. In the States.

  • @markhellman-pn3hn
    @markhellman-pn3hn 10 місяців тому

    it barely looked good on a Monte ... this car is 100% HORRIBLE !!!

  • @johnnysprocketz
    @johnnysprocketz 10 місяців тому

    DOPE

  • @mrcease211
    @mrcease211 10 місяців тому

    Can you do a video where you hit the gas so we could hear that baby purr?

  • @PInkSlipMyGSXR
    @PInkSlipMyGSXR Рік тому

    Bro I actually drop a tear when I seen this bike,I have a similar looking one,not as nice but still clean!

  • @kalshark2917
    @kalshark2917 Рік тому

    Is something wrong with your server I have downloading your verus img on different devices and networks and can never get over 5gb until it fails ?

  • @nathanwalden224
    @nathanwalden224 Рік тому

    Does anyone have a license for a Verus Pro? Version 16.2.1 or later. I upgraded, and I guess the program they have on their website to update diagnostic suite doesn't update the license file, so I'm having problems with updating the OS

    • @TurboMalibuV6
      @TurboMalibuV6 Рік тому

      You can't use anyone else's license on your Verus for Diagnostic Suite. You'll have to use your original license to activate the version that your Verus originally had.

    • @nathanwalden224
      @nathanwalden224 Рік тому

      @@TurboMalibuV6 The version I originally had was 15.4 I updated to 16.2.1, but the license is still for 15.4 Have you ever tried rolling back? I've tried a few things but no luck

    • @nathanwalden224
      @nathanwalden224 Рік тому

      @@TurboMalibuV6 any ideas? Not trying to bug ya, just curious what you had tried before.

  • @baileyscream4044
    @baileyscream4044 Рік тому

    has anyone got a link for the image and files as nothing opens when i click on the links

    • @TurboMalibuV6
      @TurboMalibuV6 Рік тому

      I've got the files in a ZIP folder that you can download directly from the link I provided in the description. You can RIGHT CLICK on the link and select SAVE LINK AS. After you hit SAVE, you might have a pop-up if you're using Microsoft Edge browser. If you do see it, it may say the file is unsafe. Just hover your mouse over the file and select KEEP....and then select KEEP ANYWAY. The file will start downloading. That's how I just downloaded it. The Licenses that are in the download WILL NOT work on YOUR VERUS.

    • @TurboMalibuV6
      @TurboMalibuV6 4 місяці тому

      drive.google.com/drive/folders/12-nxEfjC5ULZoRpQWHbcL_1faWn-Qnll?usp=sharing

  • @BehzadEghtesad
    @BehzadEghtesad Рік тому

    thanks for this video. i was going to buy a Verus D10 20.2 updated today ( for 1Kbox) after i scan my car and showed codes, to go forward each code had FIX IT botton and was forced to connect to web using a QR code but we did not have wifi that area. Q. the snap-on must be connected to WIFI for full scan functionality? 2. to use the tool we have to subscribe of snap on? how come some older models just work without wifi and no subscription as i see in shops around.

  • @BehzadEghtesad
    @BehzadEghtesad Рік тому

    dose the D10 works on Win 10 too?

  • @CodaCM
    @CodaCM Рік тому

    I just got a Neato VS Signature off for Mercari, I’m hoping it will arrive later this week. (I’m hopping by friday feb third. I probably will make a test between my Roomba 880 and it. I have been looking for a new one for a wile sense my D85 stopped powering on last year. (2022) I will try to add updates to this. If I forgot, just send a reply to this comment so I will remember.

  • @ironbuster
    @ironbuster Рік тому

    Great Idea! Do you have a part number for the Blocking Diodes used?

    • @TurboMalibuV6
      @TurboMalibuV6 Рік тому

      I used IN4002. This system was installed back in the mid 2000's. I've never had any to go bad and it's still working perfect after all these years. They are located at the rear of the engine in a wire harness getting all the heat possible from the engine compartment.

    • @ironbuster
      @ironbuster Рік тому

      @@TurboMalibuV6 Thanks, going to try and duplicate it on a V8 Application

  • @anthonychisolm679
    @anthonychisolm679 Рік тому

    NICE AF. But there's no way in hell that I'm doing all this to my Bike because I'm just building mine's for my weekend entertainment, HP AND SPEED. Not all this extra SHHHH! Just gonna slam it, stretch it much further out than this short extension right here with the BIG FAT 300 TIRE KIT on it and do the other workings on it and that's a wrap after that #2001SUZUKIGSXR1000👍🏽 👌🏽

  • @tmedocianis
    @tmedocianis Рік тому

    If you had done "UPGRADE" instead of trying to do a fresh install, all of your buttons would work!

  • @ariccze
    @ariccze Рік тому

    anyone successfully upgrade to a faster WIFI card (replace hardware) under windows 7 ??? that would be a great benefit to updating the OS.

    • @TurboMalibuV6
      @TurboMalibuV6 Рік тому

      ua-cam.com/video/zSZ5Z4rBL7g/v-deo.html

  • @saesae4175
    @saesae4175 Рік тому

    How can I give you my phone number or is there an email I can use

  • @saesae4175
    @saesae4175 Рік тому

    Hi I have a few questions about upgrading how can I get in contact with you p.m. maybe

  • @saesae4175
    @saesae4175 2 роки тому

    Question I know you did a scanner long time ago upgrading windows is it possible that you can help me with mine

    • @TurboMalibuV6
      @TurboMalibuV6 2 роки тому

      What model scanner do you have? Mine is a EEMS-325. If it's anything other than that EXACT model number then I can't help.

  • @devindraranjitsingh3696
    @devindraranjitsingh3696 2 роки тому

    where can I get the lighted Suzuki emblem?

  • @deepcreep9849
    @deepcreep9849 2 роки тому

    Racing toward the beautiful sky. Nice.

  • @MarcusOrciuch
    @MarcusOrciuch 2 роки тому

    nice pull

  • @kflorence7005
    @kflorence7005 2 роки тому

    Gawd daum that shit moves

  • @IntenseVLT
    @IntenseVLT 2 роки тому

    Why was this recommended to me?! Enjoyed it anyway!

  • @theProtocaster
    @theProtocaster 2 роки тому

    Why so slow? 👀👀 hope that was on a private road. Lol

  • @TurboMalibuV6
    @TurboMalibuV6 2 роки тому

    Actual time slip says it went a 6.56 at 106.9mph. This was with the trans starting off in 2nd gear with a 5psi boost launch. *That's the beauty of a 200-4R transmission sometimes* (sarcasm).