King Tuned Garage
King Tuned Garage
  • 14
  • 55 770
2012-2017 Ford Fiesta Dual Clutch FIX
This video is intended for informational purposes only. Attempting any repair on a vehicle may result in injury or death when done improperly. Proceed with caution when attempting any repairs on your own. If you are unsure whether you can perform a repair safely with the proper tools, consult a professional.
Переглядів: 4 115

Відео

Turbo 350z Clutch Replacement
Переглядів 201Рік тому
This video is intended for informational purposes only. Attempting any repair on a vehicle may result in injury or death when done improperly. Proceed with caution when attempting any repairs on your own. If you are unsure whether you can perform a repair safely with the proper tools, consult a professional.
S10 2.2 Starter Replacement
Переглядів 999Рік тому
This video is intended for informational purposes only. Attempting any repair on a vehicle may result in injury or death when done improperly. Proceed with caution when attempting any repairs on your own. If you are unsure whether you can perform a repair safely with the proper tools, consult a professional.
E46 Vacuum Leak Test
Переглядів 1,7 тис.Рік тому
This video is intended for informational purposes only. Attempting any repair on a vehicle may result in injury or death when done improperly. Proceed with caution when attempting any repairs on your own. If you are unsure whether you can perform a repair safely with the proper tools, consult a professional.
Clapped 350z Turbo Install
Переглядів 3,3 тис.Рік тому
This video is intended for informational purposes only. Attempting any repair on a vehicle may result in injury or death when done improperly. Proceed with caution when attempting any repairs on your own. If you are unsure whether you can perform a repair safely with the proper tools, consult a professional.
C230 1.8 Alternator Replacement Overview
Переглядів 1,3 тис.Рік тому
This video is intended for informational purposes only. Attempting any repair on a vehicle may result in injury or death when done improperly. Proceed with caution when attempting any repairs on your own. If you are unsure whether you can perform a repair safely with the proper tools, consult a professional.
Nissan Laurel Timing Belt Overview
Переглядів 119Рік тому
This video is intended for informational purposes only. Attempting any repair on a vehicle may result in injury or death when done improperly. Proceed with caution when attempting any repairs on your own. If you are unsure whether you can perform a repair safely with the proper tools, consult a professional.
VQ35 Gallery Gasket Replacement Overview/Oil Pressure Comparison
Переглядів 1 тис.3 роки тому
Busting out 2 Gallery Gaskets and re sealing rear timing covers back to back. Also I do a cold start oil pressure comparison between known good and failing gallery gaskets. This video is intended for informational purposes only. Attempting any repair on a vehicle may result in injury or death when done improperly. Proceed with caution when attempting any repairs on your own. If you are unsure w...
2006-2010 BMW M5 M6 Alternator DIY
Переглядів 2 тис.4 роки тому
Alternator replacement on a buddys M5. Like and subscribe to keep the channel going. Drop some comments! Alternator - amzn.to/2rp974Q Stubby Wrench - amzn.to/2OIhn7S This video is intended for informational purposes only. Attempting any repair on a vehicle may result in injury or death when done improperly. Proceed with caution when attempting any repairs on your own. If you are unsure whether ...
Acura TL Odyssey MDX J35 Transmission Filter
Переглядів 6 тис.4 роки тому
Replacing the transmission filter on a 04 Acura TL. For the transmission fluid I recommend draining it, filling it, then driving it. Once the transmission has shifted though all the gears doing one more drain and fill will help introduce new fluid in the system. Transmission filter - amzn.to/2r9Eccy Transmission DW-1 fluid - amzn.to/337Kqa9 OEM Filter Kit - rover.ebay.com/rover/1/711-53200-1925...
G35 350z Vq25 Knock Diagnosis
Переглядів 8 тис.4 роки тому
G35 engine knocking diagnosis. Drop some comments and subscribe to keep the videos coming. Disclaimer: This video is intended for informational purposes only. Attempting any repair on a vehicle on your own may result in injury or death when done improperly. Proceed with caution when attempting any repairs on your own. If you are unsure whether you can perform a repair safely with the proper too...
Drifting then pulling the Honda SR20
Переглядів 344 роки тому
Totaled the S14 so pulled my Sr out. Disclaimer: This video is intended for informational purposes only. Attempting any repair on a vehicle on your own may result in injury or death when done improperly. Proceed with caution when attempting any repairs on your own. If you are unsure whether you can perform a repair safely with the proper tools, consult a professional.
G35 350z Vq35 upper oil pan
Переглядів 21 тис.4 роки тому
Replacing the upper oil pan on a Buddys G35.Zoom makes a appearance and a booty shot of the 240sx before i decide to part it out. Links to the gaskets required below. Upper Oil Pan Gasket - amzn.to/2OkqCuY Lower Oil Pan - amzn.to/2CTmrkm Lower Oil Pan Gasket - amzn.to/33YXG1V This video is intended for informational purposes only. Attempting any repair on a vehicle on your own may result in inj...
Honda/Acura p1739 Transmission code Part1
Переглядів 6 тис.5 років тому
Pricing Probe: www.amazon.com/Power-Probe-PPPPSET-Piercing-Set/dp/B000RT9BNQ/ref=sr_1_5?crid=2EIOGTR8PSJ1X&keywords=piercing probe&qid=1564720565&s=gateway&sprefix=Pircing pro,aps,205&sr=8-5 Pressure Switch: www.oreillyauto.com/detail/b/import-direct-ignition-4488/engine-sensors emissions-25132/engine-switches-25047/transmission-fluid-pressure-sensor-switch-11941/88cea462fa5e/import-direct-1-te...

КОМЕНТАРІ

  • @BrokeG37
    @BrokeG37 7 днів тому

    dyno numbers? how much psi? stock internals??

  • @bassguy1945
    @bassguy1945 2 місяці тому

    So much info not really

  • @tironebowlyn8634
    @tironebowlyn8634 3 місяці тому

    Part number for that belt

  • @kylefarrell2841
    @kylefarrell2841 4 місяці тому

    Informative video. Thanks!!! And where them headkights come from?!?!

  • @terrybo5924
    @terrybo5924 9 місяців тому

    how much did you charge to do this? a local guy here only asked for $400 for both the valve cover and upper oil pan gaskets. provide the parts and he just charges for labor. i did the lower oil pan gasket myself.

  • @vardy1643
    @vardy1643 10 місяців тому

    are Cadillac converter required??

  • @brianshanley8264
    @brianshanley8264 Рік тому

    The link for the switch doesn't work.

  • @madmikescustomDaily
    @madmikescustomDaily Рік тому

    Thanks save the day

  • @maddida
    @maddida Рік тому

    What did u use to tune this thing ?

  • @bernardotorres-delgado668

    What year this???

  • @Kennethshepherd999
    @Kennethshepherd999 Рік тому

    Would you or could you do my car , it's a 2017 focus and I need clutch forks replaced I'm pretty sure.

  • @aimless-drifter
    @aimless-drifter Рік тому

    the fitment looks really tights but I like that the kit is reusing stock manifolds.

    • @Kingtuned
      @Kingtuned Рік тому

      Yes fitment is extremely tight.

    • @Kingtuned
      @Kingtuned 10 місяців тому

      Heat is well managed. I was able to fit a pipe to pull air from front of radiator directly behind bumper. @@user-fo1zc7tp6w

  • @dahliasalgado6130
    @dahliasalgado6130 Рік тому

    We're r you located I'm so tempted to fix mine that's how I came across you

    • @Kingtuned
      @Kingtuned Рік тому

      Seattle aria. You can reach me through Instagram @KINGTUNED

  • @radiorestauracion96.3fm6
    @radiorestauracion96.3fm6 Рік тому

    Where you located I need that done to my car how much u charge

    • @Kingtuned
      @Kingtuned Рік тому

      Im in the Seattle aria you can message me through Instagram @kingtuned

  • @jpeg.eric1
    @jpeg.eric1 Рік тому

    Rev 9?

    • @Kingtuned
      @Kingtuned Рік тому

      Yes, originally was Turbonetics supper 60 kit.

  • @staticnezuko240sx9
    @staticnezuko240sx9 Рік тому

    AE86

  • @jimh2074
    @jimh2074 Рік тому

    Good work mate, well done.

  • @tylerhilton03
    @tylerhilton03 Рік тому

    I was wondering what temp it was outside when you did these cold starts ?

    • @Kingtuned
      @Kingtuned Рік тому

      Was a chilly morning here in Washington I would say somewhere around 50°

  • @46god
    @46god Рік тому

    what codes was your car throwing for the vacuum leak? i have both p0171 and p0174 the lean bank on all cylinders and my car hesitates from idle when i give it alot of gas rpm goes up then drops real quick then will accelerate. i’m gonna do a smoke test first im thinking a vacuum leak but many ppl said could be electrical idk

    • @Kingtuned
      @Kingtuned Рік тому

      Vacuum leak will definitely cause lean codes. I’ve also had bad o2 sensors stuck lean causing similar issues. Consider subbing. Good luck.

    • @46god
      @46god Рік тому

      @@Kingtuned just subbed bro got you to triple digits! keep up the good work can never get enough e46 content and learning material

    • @Kingtuned
      @Kingtuned Рік тому

      @@46god My first mile stone! Much love. If theres anything specific you want to see LMK ill try and incorporate into future content

    • @46god
      @46god Рік тому

      @@Kingtuned well right now i also have code p0440 generic evap code that im trying to diagnose along with the lean bank codes. i replaced gas cap and just did purge valve still need to clear the code see if i fixed it. if you ever had that code or any evap problems maybe that vid would be cool. this is my first bmw and my first time working on a car so im trying to soak up everything like a sponge lol. i knew id have to fix stuff myself i enjoy it but some of these codes can be mysterious and i cant afford to throw parts at it. but ill tap in and watch whatever e46 stuff you put out brotha

  • @REALONES76
    @REALONES76 Рік тому

    My ac on my e46 stop blowing air any ideas.?

    • @Kingtuned
      @Kingtuned Рік тому

      There’s a lot of reasons why your ac might be failing…. Quickest thing to check would be to see if the system is charged. Best if luck

  • @goyopequeno4428
    @goyopequeno4428 Рік тому

    I have at 2011 Ford fiesta and they have the same problem you know how much Is for fixing because samebody tell me they cost $5,000 dollars

  • @DTUFINOPhotography
    @DTUFINOPhotography Рік тому

    My 2010 FX35 is in the shop right now getting head gasket, valve cover gaskets, water pump and timing chain done, i told them to do the gallery gaskets as well while they're in there.

    • @Kingtuned
      @Kingtuned Рік тому

      Preventative maintenance is key.

  • @christiansupnet5975
    @christiansupnet5975 Рік тому

    After removing the bottom motor mount bolts to remove the front subframe, did the engine hang off an engine support bar or is none required? Currently doing this job at the moment. It is mighty hard without a lift lol

    • @Kingtuned
      @Kingtuned Рік тому

      Engine support hoist is required. Once subframe is removed there's nothing to support the engine. It's a time consuming job even with a lift. Thanks for watching

    • @christiansupnet5975
      @christiansupnet5975 Рік тому

      @@Kingtuned Thank you for your timely response, I have made wood chocks as a way to hoist the engine. I ended up stripping the nut that holds the brace below the passenger compression arm. Now I gotta wait on the deep nut extractor before proceeding.

    • @Kingtuned
      @Kingtuned Рік тому

      @@christiansupnet5975 best of luck!

  • @jacuzzi1971
    @jacuzzi1971 Рік тому

    Did you upgrade you MAF sensor and fuel pump?

    • @Kingtuned
      @Kingtuned Рік тому

      Yes high flow FP along with a MAP sensor.

  • @dontbestumped
    @dontbestumped Рік тому

    Nah u speaking in my left ear had me tripping

    • @Kingtuned
      @Kingtuned Рік тому

      LMFAO, my bad i need to buy a mic.

    • @dontbestumped
      @dontbestumped Рік тому

      @@Kingtunedare you in usa or Canada?

    • @Kingtuned
      @Kingtuned Рік тому

      @@dontbestumped USA

  • @Banana69999
    @Banana69999 Рік тому

    I need to get this done since one of the bolts got overtorqued onto the upper pan for a q60. Body shop said they needed to drop the engine, are they bSing me?

    • @Kingtuned
      @Kingtuned Рік тому

      When bolts get overtorqued the threads will pull out. Drilling and tapping is the fix. Usually they'll be in really tight spaces so yea i would say engine more then likely has to come out. Good luck.

    • @Banana69999
      @Banana69999 Рік тому

      @@Kingtuned we did the drill and tapping but it got cross threaded. I found another guy that is doing it cheaper, he said that the rear subframe has to come off and engine be held in position

  • @ArtemisArtz
    @ArtemisArtz Рік тому

    🤣🤣🤣

    • @Kingtuned
      @Kingtuned Рік тому

      Clutch replacement on the street shredder is coming up.

  • @obwoyobwoy5515
    @obwoyobwoy5515 Рік тому

    Poor lighting and angles and lack of verbiage identifying what he’s doing smh

  • @justhere4721
    @justhere4721 2 роки тому

    Nissan makes it really hard to tell if it's low pressure. The factory service manual says it should be over 14 psi at idle and over 43 psi at 2k rpms with the engine warmed up. Which to me seems low but Nissan says it's normal. Also, the dash gauge uses voltage to calculate pressure, so using a pressure tester will be more accurate. Having experience like this guy is good though. He knew what to look for.

  • @samuelmeza1072
    @samuelmeza1072 2 роки тому

    Is this a all wheel drive

  • @eltiburon17ify
    @eltiburon17ify 2 роки тому

    Nice video! Is this the same for 2009 acura mdx? I would appreciate your answer pls thanks.

  • @ginvesto8370
    @ginvesto8370 2 роки тому

    how long does this job call for?

  • @PrincipalDBA
    @PrincipalDBA 2 роки тому

    Where is this filter on the Ridgeline Engine?

    • @isnowyazn
      @isnowyazn Рік тому

      Did you ever locate it? I did this change on a 9th gen ‘14 Honda Accord V6, and I had to access the in-line trans filter from underneath the car, rather than from the top of the engine bay.

    • @PrincipalDBA
      @PrincipalDBA Рік тому

      @@isnowyazn I abandoned the effort. I'll try again since I still have the parts.

  • @bv1199
    @bv1199 2 роки тому

    did it give you p0011 ?

  • @benjaminmadran8163
    @benjaminmadran8163 3 роки тому

    how much times does this take with the right tools and the knowledge?

  • @ZXXpilot
    @ZXXpilot 3 роки тому

    Can you update with HOT 5w30 oil pressure readings(with new gaskets) at factory idle speed and at 2k rpm? thanks!

  • @andresandrade5963
    @andresandrade5963 3 роки тому

    Bro right when you said you're gonna show where it goes you cut that part of the video out! And skip to the location without showing how to get there 😐😩

    • @velezf216o
      @velezf216o 2 роки тому

      Bro it’s under the engine in the front driver quadrant

    • @andresandrade5963
      @andresandrade5963 2 роки тому

      @@velezf216o it's still really helpful if he shows exactly how to get there but I did end up finding it bro

  • @rushdiishmail9686
    @rushdiishmail9686 3 роки тому

    Thanks great video. Need to change my lower control arms and oil pan gasket. Very helpful.👌🏾

  • @911Estyle
    @911Estyle 3 роки тому

    The best when you have all the right tools. ✅

  • @itsjustaguy27
    @itsjustaguy27 3 роки тому

    Great job showing where it goes i still dont know exactly where it goes

  • @EntertainedOrNot
    @EntertainedOrNot 3 роки тому

    What program is this?

  • @redturtle242
    @redturtle242 3 роки тому

    Did your check engine light come on??

  • @TheRebuilt1
    @TheRebuilt1 3 роки тому

    I did this for a nephew car and regretted I would do for him. It's much more accomplishable with a lift vs at home on jack stands. I am not sure why Nissan wouldn't use some top grad sealant on upper pan from the moon or something. Maybe crank case pressure in these vq35's contribute to oil leaks ?? Great upload and setup my man. Respect.

  • @Rayvon89
    @Rayvon89 3 роки тому

    Did you need the washer?

  • @davidkillian5023
    @davidkillian5023 3 роки тому

    Where do I connect the chains from the cross support above the engine . I have to do the same thing but I can't figure out where to bolt the change to I have the exact same engine brace as you

  • @daudimn
    @daudimn 3 роки тому

    went off curbs, woman thing.

  • @jeromereese6605
    @jeromereese6605 3 роки тому

    So how you fix it

  • @richardsavila
    @richardsavila 3 роки тому

    great video. thanks for sharing

  • @sergioramos9655
    @sergioramos9655 3 роки тому

    What’s your ig

  • @justinmcclure5484
    @justinmcclure5484 3 роки тому

    Where did you hook up your engine support bar to?