Відео

600 👍

Walker razors where kinda lacking in the deadening department. I used poly fill for pillows from the fabric store, cut it in about 8" x 1" long strips and got it behind the speakers and really packed it in with a flat head. This worked wonderfully. Thank you! poly fill is also great as a cheap fish tank filter..

If you take the slide off the MSH pin is much easier to install. You don’t need the hammer.

Parallel to perpendicular was nit the words ro use lol great video though bro. Thanks for the help!

Video is correct, but did leave a bit out. Need to pre draw the screws and cams for the furniture thickness. Too loose, it will spin all day, too tight it will not secure. Aluminum and polymer are different, so be careful.

Thank you so much

Thanks for this. Worked well.

Thanks for this helpful video. I bought one 👍❤

Thanks Brother big help

Thank you buddy. Got a badly stuck barrel nut off only to realize the barrel itself was also stuck in the upper. Your tip worked! Now the upper’s clean, undamaged and ready to be re-barreled. Saved me a bit of money!

Helped me , thanks

I wanted to see you struggle getting that first iron sight screw off, I am having a time with mine. You made it look easy!

Enjoyed this video and honesty. ✅🙌🏼

I cannot for the life of me get the original sight/plate. I have stripped the Allen key…hopefully I haven’t stripped the head of the torx screw smh

Thank you very much, I tried it with my MK4 placard and worked flawlessly

Thank you! Great tip

Tried this with a wooden dowel yesterday, hitting it waaay harder than that, barrel didn’t budge a millimeter, and the dowel broke over and over until it was too small to use. I think I need a vice.

11:10. Those are the frame rails.

Sounds Good! I think I'll listen.

Lol i did this with my OpsCore Amps, which has pretty bad dB protection. Super weird since they are $2k+

These Ones? You mean these or this one.

Man, this video was 3 years ago but I just did this trick in my razors and it was night and day. I actually used extra dense sound proofing cut with an exacto knife and shooting with out my suppressors is very comfortable now. With the suppressors it’s perfect.

Very nice explanation. Good camera and sound too. Mine's a G2c but it's the same. BTW, I use a $3 cafeteria tray when I clean my guns. Cheaper than a gun mat and none of the parts can get away because of the rim.

When I took the old Mattel off the back end of my grip module shot off? Now my grip safety won’t work, what am I missing here? Is there any pieces that could’ve flown out?

This magwell it’s not good and it requires that screw to be very thigh if not it won’t support the front part of the magwell the problem is that the mags don’t have a free drop that’s why I don’t recommend this one

Don't go cheap with your hearing. Once it's gone, it's gone for good.

This did not work for me at all. It is way way too hard to pull the magazines out when the Velcro straps are wrapped at the top. Update: Using a lighter, I was able to reshape the KYWI inserts to have a perfect amount of tension.😌

Best video 🤝

Cut up yoga mat works wsh better

Thanks!

Best video on this, short and sweet. Thank you! The method Works great

thanks buddy wass exactly what I was looking for. My C2 just arrived man its a nice pistol.

you lost me when you said you think it's a myth pushing a boar brush both ways through the barrel because it affects accuracy and wears the threads inside down because of the way they are cut into the barrel learn some more about guns brother you might be lucky but probably just haven't noticed it will change accuracy over time.

Holy fuck we shoving the single action 2011 into our pants with the safety off? Jesus CHRIST

Always clean the breach face upside down to prevent debris and solvent from entering the firing pin channel.

I don't understand how everyone is keeping it at 2 o clock with handle facing strong side, i have a tiny ass glock 43x and it prints like crazy on all my holsters. If i put it at 11 o clock with grip face to noon it isn't near as bad.

I removed my pin and the back side of the grip came out of alignment and its almost impossible to put back

Is this compatibale with G47?

i installed mine and used my stippling tool to melt in into the frame on the inside of the well, very strong and works well, doesnt move at all

Looks like a good opening into the trigger from the underneath

The BELT clips are supposed to mounted to your BELT. Not your pants…

I'll stick with my sig

Thank you for your vid. I received the magwell for my C2 from Staccato today and I might add the hammer needs to be down before taking out the mag pin.

sped up part sounds like laser guns "pew pew pew"

Nice video! Can I attach this magwell if I have the beaver tail on my Glock 19 gen5? Thanks and more power to you channel!

If you got to go that far extensive work to make them better my new pair and get rid of the f****** garbage you've got

do all magwells flop on the gun or just this junk

Good advice for that trigger bar. I just dropped some oil in that section you mentioned and it does feel smoother after working it in.

I always give the spring a once over especially if it's new. For whatever reason, new gun springs sometimes come with corrosion on them already. Cleaning that stuff off and getting some oil on it takes care of that long before it becomes a bigger issue.

This is exactly what I am looking for, thank you!