Відео

First thing that comes to mind… you’re not running it with the choke still engaged are you? That would for sure cause that.

Hmmm. I’ve never had a jam I couldn’t clear by hand via the access door you see me do my next chipper video, carefully turning the blade backwards and forwards to free the material, then carefully pulling the chunk out of the chute. Sometimes just using the recoil/starter rope to move the blade will free things up. When chipping, make sure the engine is running at full throttle. And since you’re new to the machine, maybe start with smaller material while you learn its quirks and tolerances? I feel like now I’m familiar with it I haven’t had a jam in ages… like I can’t remember the last time I jammed it.

​@@lumberingshenanigans every time I jammed it was when I was feeding a large 2 to 3 in piece that it would grab and then I would pull back grab and pull back and when the end got all the way to the top of the Chute to where it was unsafe to grab and pull back cuz it became too small I would let go of it and then it was running to the shoot and jam. That jam was so stuck in by the blades I had to take the whole thing apart I could not twist it could not turn it could not pull the cord and the piece is that got stuck or about 2 in longer than the shoot itself

Thank you for saying so. I have a couple of episodes in the can, which is just as well because it’s 100° here again today! 🥵

Thank you for your support. It means a lot. 🥹

Oh good tip! “Think like water” Thank you. 🙏

Thank you 🙏. I actually filmed a new video about two weeks ago and this little guy made a cameo, started easily, chipped wonderfully, and that was after being left outside under a tarp all winter. So it’s still going strong. - I’d say green wood is easier to feed and chip than seasoned wood and the chips are a little cleaner with less dust. - Top shredder isn’t something I’ve had a need for, I just don’t need to do that kind of yard work and leaf clean up or mulching, but it seems to shred as expected. Thanks for watching!

@@lumberingshenanigansthat is great! Thanks for sharing your experience it’s been very helpful for me!

Oh it’s just 1/8th inch foam weather stripping (amzn.to/45MOsql - sponsored link) - I wanted a nice clean seal with a little wiggle room for potential structural movement/settling. And I didn’t want to use caulk or putty which felt a bit daunting for my first time doing a project like this. Since these particular windows are completely protected from rain it seemed like a good solution.

@@lumberingshenanigans I see. Two of my three windows will be exposed to the weather on the bottom, should I consider putty or caulk instead? Thanks a bunch!

@GMindset89 Putty would be the traditional method, but honestly I’m no expert, so I’d hit the UA-cams for more specific info.

😂 yup, you would definitely not be the first person to use hand tools to make something out of wood. Fun fact, while carpentry has been around for 780,000 years according to archaeologists, the hand saw wasn’t invented until about 3,500 years ago, power tools started appearing in the early 1800s with the first electric drill in 1889, and the first electric miter saw wasn’t released until 1966.

For sure there are many gauge options. And you could make a few for different uses. In my case, in a wild forest setting, I’m only looking to separate sticks, twigs, roots and bigger stuff to quickly make the soil a bit more even. Thanks for watching. :)

Are you talking about a mixer valve? I've never seen a shower with an actual single source valve, but wouldn't have chosen one if they exist. The choice to use hot only, cold only, or to set the temp on the fly was why I chose the separate valve version. Plus I like the look of the basic industrial style plumbing.

@@lumberingshenanigans ​ I'm talking about something like the Dundalk Economy Shower. Do you think a single supply through a camp heater like yours will be too weak? Heater spec is 1.32gpm.

@obstruksion The heater I have is a full-size heater not a camp heater, it and my pump could definitely supply enough water, but the idea of having no control over temperature while I’m in the shower seems like a major negative. I lived with a tankless heater in my house for about a decade and did manage to get the temperature dialed in to my personal preference eventually, but there were still times when I wanted it hotter or cooler… and that’s just me. If you’re catering to several different people, at different times of the year, then running a dual feed would definitely be my choice.

@@lumberingshenanigans I was planning to mount the camp heater (with controls) outside and within reach of the user. I have a cover for it when not in use. If I were to mount it inside away from the shower, I would certainly agree with you. Thanks for all the advice!

@obstruksion oh for sure, there are camp heaters specifically meant for that, the dial on the until does essentially the same thing as a hot/cold mixer tap while saving propane (or electricity) by reducing the temp of the hot water itself. It’s a good solution for that kind of setup. If I were starting from scratch that might have been my choice too. But I was gifted this structure, and the heater. I could probably have built three showers like the one you’re describing for the cost and time of building this one. 😂

Ah! That’s a very good but if info. So if I do take it off, then I’ll have to replace it with a grill of some kind to allow for airflow. Thank you. 🙏

Glad someone learned from my mistake. I haven’t solved it yet, but the solution would almost certainly be to staple weed barrier fabric to the underside. In my case though, I’m not sure that will be enough. This grass is epic.

@@lumberingshenanigansI’m now thinking about renting a dingo for the day and shaving off the top layer down to dirt. My area is not wetlands. So get down to dirt, then as you suggest; put down some roundup perhaps then a weed barrier.

Oh thank you. I’m definitely not a carpenter either. So… gosh it’s been a while, but by the time I made the frames I’d measured those angles several times during the build, and most accurately when it came time to order the custom cut glass. So I have a few tools for measuring angles, but mostly I use a digital protractor like this: amzn.to/3V57Da1 (affiliate link) - But I don’t think I was using the glass as a guide, I would have used the cabin itself as a guide, as a final foolproof check, while allowing a little bit of a gap for movement and expansion etc. I hope that helps. It was a nerve wracking project that ended up being less difficult than I was expecting.

Thank you. 🙏 Luckily I get pleasure from the challenges presented by both. It’s all creativity at some level.

Thank you. I’m glad the video helped. I recently had a conversation with a friend about chipper capacity. One thing that came up was to think of the stated capacity like the top speed on a car… sure your car might be able to go 150 miles an hour, but it probably won’t do it for long if you drive that fast all the time, and if you do you’re definitely asking for an accident. Safer not to test the limits.

Exactly. And I couldn’t find one locally that wasn’t made of plastic.

Oh interesting, I wonder why. Maybe to reduce back flow when you have to change the filter? 🤔 May be a smart move.

Right!?! Soil is heavy! 😂

I stand by it. For the cost, it’s exactly what I needed. Is it perfect? No. Is it as powerful as a machine three times its price? No. But I’ve had no issues with it beyond what I discussed in this video, and it fits my needs and my budget. About to head into my third spring using it and I don’t anticipate any issues.

Leaks on the bottom of what part?

@@lumberingshenanigans of the water heater, sorry lol

It’s at the connections we have tried tightening with a wrench and with our hands and it’s still leaking

Did you use plumber's tape on the connections?

@@lumberingshenanigans yes we used tape and the pipe connected glue neither worked

Hi, thanks, I'm glad it was helpful. The Brush Axe I use here (and in many videos) is my favorite outdoor tool of all, this exact model I bought 15 years ago isn't made anymore, but the new version is here: amzn.to/3LF6elS - It's concept of combining a hooked pull-knife, a nicely weighted chopping tool, with a blunt hammer style tip is very useful in the forest. It’s based on the Woodman's Pal: amzn.to/42vTLaY which is a WWII era design and is still made in the USA today, but is considerably more costly. I do own a Woodman's Pal, but I prefer the lighter stainless steel Elk Ridge version as my everyday carry. These links are Amazon affiliate links, purchases made through these links may result in a small contribution to the channel at no additional cost to you. Thank you.

That’s a great idea. I always pile extra branches and logs on the outside of fences to dissuade deer from trying to jump even a 6-8ft fence. Plus it’s a great way to create habitat and sequester carbon. 👏

That’s a great suggestion for a garden or micro-farm setting, but I have a feeling my canopy is too dense for them to compete with the blackberries. And if they might thrive, I would be hesitant to introduce a potentially invasive self propagating species into such a wild setting. There are some horror stories of holly and bamboo invasions in the area and I don’t want to be that guy. 😏 So dead hedges are probably a safer option in my setting.

It’s still exactly the same… what a year and a half later. I’m kind of surprised.

Good idea! I’ve been thinking about adding wheel weights also, like I have on my BCS two wheel tractor. Just bolting a couple of 10lb gym plates on each wheel would make a huge difference I think.

It’s funny, I did a whole video (never posted) about how pallet wood mostly isn’t great, but “dunnage” wood can be an excellent source of good free lumber, even treated 2x4s etc. It’s the wood that lumber yards receive between and on top of pallet loads from lumber mills, used to protect the stock. Usually free if you ask. No nails. No dismantling. Just free lumber in 3-4ft lengths. I made my wooden doormat with them in a very early video.

This was my first time using pulleys. Ever. So I was in no position to be teaching anyone how to do it. But there are dozens of extremely detailed how to videos on here if you look. Good luck!

Two very good suggestions! For drainage I unscrew the filter (which is at the lowest point) open all the faucets, and everything drains easily. I’d like to do an air blast too, but I don’t have a compressor.

I know women older than me who could outpace me on this rig, and I know men half my age who’d be hopeless. It’s all up to you, good gloves, don’t rush, and get it done before the branches become hard and brittle. Or check out my dead-hedging video, that’s another way to “get rid of” unwanted branches and stuff.

I think there was oil included in the box, but honestly I have no memory of it. If they didn’t include any I would check the maintenance/instructions.

The BEST fatwood does. Even different pine types have different levels of goodness. But any resin rich evergreen will produce resin rich wood at stumps and joints. Same way Sugar Maple has the BEST syrup, but any Maple (Acer), and many other species can also be tapped for syrup. Hickory, Birch, etc.

I honestly don’t know. A lot of this shower was built around hand-me-downs, including the structure and the heater. But I probably spent $200 on electrical, maybe $500 on pump, filter, plumbing and fittings. That’s a guess though.

Good question! I put a link to it in the description.

In theory it’s supposed to reduce the cycle frequency and wear on the pump, provide a more consistent and predictable pressure, and reduce noise. But it’s one of those things, I read about it and went for it without really knowing if it was necessary in my setup, so it may be overkill. 😏 As a side note, I originally started reading up on them when I was designing an irrigation system, most irrigation timers require pressure to open the valve, and pumps need a pressure drop to know when to start and stop, so without a tank maintaining pressure the system won’t function. Catch 22.

Sure, it’s a very simple setup. One panel, one 12v 100Ah battery, and a super cheap controller. Renogy has the kit for $99 (minus battery) Affiliate link: amzn.to/4cgeAfZ

I’m glad it was helpful. Thanks for watching. :)

Thank you! Some very solid advice on both counts. And since I already have that staking tool, doing a little chamfer would have been super easy. Next time for sure! 👍

Hey thanks for watching. I’m not sure, I think the number of blades vs strength of the motor vs the angle of the blades all worth together and affect airflow in a delicate balance only an engineer can figure out. I’ve seen five and six blade fans, bigger and smaller fans, double header fan. I assume fundamentally there’s a limit to how much air can be moved by the energy created by the heat of the stove. ¯\_(ツ)_/¯

Thanks! Glad you found it useful. Before you head to the store, check out my follow up video after the first winterization. I upgraded the filter to a 1 micron carbon filter. Thanks for watching!

Thanks for sharing. If anyone else wants to check out the video @kiaya007 is talking about it's this one: ua-cam.com/video/hVTf_31NwqA/v-deo.htmlsi=uoJVmwhwqmCQnAYr - it's definitely a simpler option if you want to just throw something quick together out of 2x4s. There's nothing revolutionary about a wooden frame with a wire mesh stapled to it, and you can do it however you like. I expect mine will last a little longer than Joe's, but then again... his is simple enough you can just make a new one every year or two. Thanks for the recommendation! And thanks for watching. :)

Yay! I’m glad. Feel free to come back and share a post if you build something cool. Thanks for watching! :)

Wow. Thank you. 🙏 I really appreciate the support. :)