Відео

Sorry but it aint a Range Rover with a Numb TDI Farm Tractor Engine !. V8 3.9 or 4.6 makes it a Range Rover with Finesse to match the Body Design

Great video. Really appreciate you showing all of the steps. How’s the vehicle working out for you so far?

this is definitely not 20 feet length garage, the fact you have all that space in front and behind to open the hatch, the math aint mathing :)

You more than likely have wires coming off your P leads through 400Mohm resistors. This is not my preferred way to integrate is using the UMA tach sensor that screws into the base of the magneto. They work better in my opinion

I got a 2025, only 2 wires going to plug for light, none for outlet. I guess they're really not going to have a 12V plug in the frunk. any idea where the original outlet wire start at?

Hello, I have a similar setup on my J model. I recently removed the magneto from the airplane for its 500-hour inspection. I’m using a dual magneto by Bendix D3000. After installing a new magneto, I’m now encountering an error and a red flag whenever I exceed 1700 RPM. I’ve checked all the connections on the back of the magneto, and they appear to be secure. However, I don’t see an RPM sensor attached to the magneto. I’m unsure what could be causing this issue or how to resolve it. Everything was working fine before I removed the magneto. I’d appreciate any advice or insights you might have. Thank you!

WOW! That thing looks roomy!

Love the T-Bone, what a great airplane!!!

So beautiful airplane looking, I love your camera work, great job, keep going, please

1200 and 5 miles? Fortunately, its a CAT II T-Bone!

Did my multi commercial instrument in one of these a fine flying airplane.

smooth

this was the first plane I ever flew in! she helped me get over my fear of flights a couple years back at KGRD. hope she finds a nice home!

Nice avionics - you really enabled every RADALT callout possible :)

Awesome. Again, thanks so much for posting this and sharing.

Beautiful aircraft. Love the updated panel.

powder coating it would be cool but engine turning it would look badass love your channel by the way just came across it

I was more than horrified after my appointment with this lunatic today in Arkansas. She told me in my appointment today that she came to Arkansas because it was “pro life“. This is the most absurd thing I have ever heard anybody say. Arkansas, on the regular, puts people to death in our prison system. There is nothing pro-life about this state. It is pro birth. This woman has the audacity to come to my state under the guise of being a “healthcare provider“ with every intention to allow women to bleed out in the parking lot when they are having a miscarriage. To force them to carry their rapist’s babies. To force children to carry the babies of their Pedophile assaulters. To force women to carry to term a fetus that doesn’t have a brain. Honestly, I could go on and on. She needs to go back to South Carolina where she came from. Women in the state of Arkansas are fighting now and will continue to fight until autonomy over our own bodies is restored. She should know that I immediately left the very disturbing and disgusting appointment I had with her, and made an appointment with Planned Parenthood to take over my gynecological care. I would rather die than give her or the cornerstone clinic that she works for another penny of my heart earned money. my advice to any woman in Arkansas is to stay as far away from this lunatic, far right fringe maniac, that you possibly can. She will let you die before she will give you the healthcare you need if you have a crisis in your pregnancy.

Thanks for the video. It had been years since I was in one of these and was thinking the steer pulled in forward, and I was thinking the mains pulled back like mosquito legs, but I had to see it for clarification. Thanks again!

Super nice Mooney. You have really made this plane into a jewel sir….

Very nice

... Buddy, you need to learn how to use a tape

Hi sir. How much you selling for?

This Dr. is amazing and love what she stands for! She did my hysterectomy and honestly had no pain after!

Outstanding video!

part 2? this is great stuff

it feels so wrong seeing a cesana with retractable gears

Una delle migliori fuoristrada prodotte da LandRover…se non la migliore

Bruh be dangling like ma balls innit

Well that settlies it need one to move a jet ski around

Did you make a part 2?

Why tow in reverse? Could you use a rear hitch for long pulls, then flip around for pushing... Seems like a possibility of tensioner damage doing it this way unless you have the rear engine version. Either version you'll want to add an oil cooler with thermostatically controlled fan as these engines have a tendency to overheat their oil under high loads or slow speeds.

You’re 400 degree CHT warning, do you have surefly?

A drawer for your Colt 1911?

R1S owner here, also in blue, love the color -- my phone charger works fine while I'm driving... perhaps I have an more recent model or something? (iphone 11 pro)

The number one problem IMO is the door handles. They stick out when unlocked, no secret when's it's unlocked. That design is horrible, cheap, and it looks awkward. Love the R1S though.

I love it. I think the problem with the turning comes from the direct drive axle in the rear. Im not aware of anyone doing this but it should be possible to modify a lawn mower differential to fit and replace the stock axle.

Thanks for the great video Evan, I appreciate the conversation because it adds more context. Couple questions: 1. Regarding the relay; did you use it because you were planning to add a third horn? I was thinking that, if the Rivian had two originally, a relay wouldn’t be necessary. 2. Does the relay add a delay to the second and third horns? I sort of hear the clown horn go before the other ones. 3. I doubt there is any noticeable difference but do you feel that your placement of the horns would make their sound be dampened by the frunk’s container? 4. Did you set the Rivian into any mode before working on it? Idk if it should be in “service mode” or else for safety purposes.

Didn't even realize the SUV version was out as I haven't seen one IRL yet. I see the pickups here & there - which is great. What do you mean the OEM wireless charger didn't work? It was, by design, not supplying power to the charger when the vehicle is in motion or your phone would just fall off so it didn't matter either way?

Does it have a security camera system similar to Tesla's? Does the heated steering wheel warm the entire wheel or just areas, like the 3 and 9 o'clock positions?

You've got to stop saying A-a-a all the time.

Outstanding video! I have found that the factory charger only works with my iPhone 15 pro (with a cover) if I lay it parallel to the dash, rather than perpendicular. This should not be the case, but I just wanted to pass this along to those who want to use the factory charger. Keep up the videos Evan!

sorry, just too long. Detail is good, but too much babble. Thanks for taking the time.

No thanks. I stop watching as long as you mention the Chinese horn.

found it, thank you. Although it could definitely fit in a 20x20 garage, I have to agree with the other comment. If you have about 2 feet behind the R1S, then you'd only have 1 foot left to spare in the front, since 2 feet + ~17 feet for the length of the Rivian would give you 19 feet, leaving you with only a little over 1 foot in front of the Rivian. Thanks though anyway. Pretty cool that the back opens even with the limited space in the back.

Thank you this is useful. You have more space left in the front compared to the back, so your garage depth has to be more than 20 foot. 201” (rivian length) + 23” (space in the back) = 18.5 foot.

Can you please link us to the cup holder system you have in the lower console?

Hope you enjoy your R1S. Fellow owner here, and I love mine. One of Rivian's best unexpected (for me) features (among many) are the regular OTA updates to the software that controls many aspects of its performance. Ride quality was initially one of my few dislikes about the vehicle, and the OTAs have made regular improvements on that. So much so, that it's approaching excellent status imo. Enjoy, and may it serve you as well as your RR apparently did.

This video and the horn video you did later are both spot on. Seeing the engineering that went into Rivian’s charger mat - that thing has to cost them $1,000 and you’re right - it has never worked for anyone. I bought the same TWraps charger mat the same week I picked up my R1S and it works grt but I also hate that both USB ports are filled. I’m not going to take the time to rewrite like you did but love that you’re showing us how to and calling attention to some Rivian changes for the future, ie the little pen holder slot in front of the charger pad???? It holds a few toothpicks in my car. ;) Solid videos!

Great video Evan. I remember folks talking about the change sometime between late 2022 into early 2023 when Rivian took out the second horn and how some were complaining. When I picked up my R1S in the Summer of 2023c I was curious and couldn’t believe the clown car horn they allowed to go in these beasts.No clue how the horn decision passed any team’s approval TBH?? I had to watch your video just to see how to fix this and unfortunately I don’t have the time but grt job walking us thru it. The outlet is another changed that happened to reduce costs, so thx for doing that piece too. Love my R1 and no vehicle can be everything to everyone but the horn was for sure a hungover Monday morning misstep in Normal for someone. Cheers