Відео

What recoils more 9mm or 38 special

😮😮 😊😊🔥🔥⚡⚡ I from THAILAND 🇨🇷 patlung พ 16 ตค 67

These are cool. & agree the P17 is a fun one too. But seeing stuff like this makes me want to skipp them & buy a old S& W trade in. (Apples & oranges regardless of $ ,I know. )Older the better. Saw some nice ones from the 70-80s not too long ago for around 300 .wouldn’t have mattered if they were $99.99.9999 at the time.budget has been too lean to think about wants lately. Like guns,like bullets but Like& need food .+ it’s election time. Generally stop shopping for a while every 4 years. just came across the first polymer ones of these recently online. Have 365xl & it looks something like one with some CZ + a grip safety ,now this metal one. & Yes,a gen 2 & 3 ect will come like the 2000s. Like to know exactly what the “patents“ are specifically. They will expire soon enough. Anyhow,have fun..but these ned to be built with good stuff to be good. Def not getting $500 worth out of this if that’s even what the cost. Sub & like. They add up & get Enough & free bullets & stuff eventually .free is good. Ps. Could go the rest of my life without seeing a mandatory optic cut being added on every single gun .rather go back to sending slides off IF you wanted to. Get it done where & how you want. PSs. Good holsters & belts don’t care about 2-3 pounds of steel. I know where some 1911s from 1911 are.where is that thing going to be in 113 years?its a shame to waste good ideas.

If you drive it out on the right side, you drive it in from the right side. This can't be your first time.

I bought the Security-380 hoping for it to be a replacement for my S&W Shield 380 EZ because it holds twice the number of rounds, however I have not been won over by its reliability. I have about 1200 rounds through it and have replaced the firing pin and spring, the recoil spring, and the hammer spring and that fixed my light strike problems but I still am getting some failures to go into battery and some occasional FTE's. I've had hand surgery and have arthritis in both hands so a pistol that's easy to rack and doesn't punish my hands is what I need. I think you are right about them using the 9mm mag from the Security 9 and then putting in that funky short follower with the gap in it and that may be why mine hasn't been as reliable as it should be. Maybe I have been spoiled by the Smith as it always works 100% of the time no matter what kind of ammo I toss in it, but then I'd rather have an 8 shot gun that will always work than a 15 round one that may or may not always work. Sure wish that someone like Mec-Gar would come out with some mags for this gun as they always make excellent mags that you can depend on working every time, and supply the factory mags for a number of reliable name brand guns. Really wanted to love this gun but am quite disappointed with its overall performance, definitely wouldn't rely on it for a carry gun. Unlike a fine wine, we generally don't get better with age.

If I used a vortex crossfire 3-9x32 and CCI stingers with this rifle would it be good for coyotes?

First time viewer. New sub. I just bought a gx4 today. Havent even got to shoot it yet. Excited to get to the range. God bless ya.

KelTec JUNK

Wow that’s more than the Ruger even costs!!!! But glad you did it so we don’t have to n thank ya much for the advice and good information!!!!

Believe it may be the magazine disconnect. It's keeping it from engaging.

I have Hogue Monogrips on my Taurus 856 +P Defender three inch snub nose and even though the grips are comfortable these particular Monogrips have an open backstrap unlike those you have. Why these don't completely cover the backstrap like those you have I don't know. I would prefer complete cover. These came with the revolver and I don't want to switch to the small Taurus rubber grips that give complete cover and came extra because I don't get a full grip. If I don't get a full grip then I don't have good recoil control regardless of concealability. I will just stick with these unless they become uncomfortable with +P ammo or heavy for caliber. Thanks for sharing.

Good evening, this bulldog is using anabolic steroids, hahaha, magnificent revolver, congratulations and thanks for the video. A hug from Brazil 🇧🇷

Charter arms does not make a quality revolver.

Do you own most of the guns you reviewed ?

The bodyguard 2.0 does have a version with a thumb safety. Just like the shield they offer versions with or without a thumb safety (unlike Glock) Personally I prefer a thumb safety for a striker fired handgun or any gun without an external hammer. My first choice for larger guns are sa/da guns with an external hammer that I can cover the hammer when I draw from appendix cc but pocket carry guns generally are better without an external hammer that might snag so I prefer a safety version that I can train with so taking off the safety when drawing becomes muscle memory

I would like to see someone do a test of the S&W SD40 2.0

Just recently bought a mag pug 3".. Tooo much recoil. Shooting +p for carry. Its definetly on the light side. It would be a liability for me to carry full load 357...5 yds an under ...lol I need more time out with it for 357 loads for CC.

what is the typical trigger pull weight on this revolver ?

I bought one of those when they first came out. Mine came with two magazines. Yes, it does take 10/22 mags, BUT, the 10 rounders are tough inserting and removing them. No problems with 15 and 25 round mags. And unfortunately, the rear sight flew off while I was shooting it earlier this year. And it appears that the set screw was stripped, so I had to put an optic on mine, which is exactly what I DIDN"T want to do. But it does break down easier for cleaning than the 10/22. Good luck with yours.

Yes, I absolutely carry my 30sc Shield Plus. I even own the 9mm Shield Plus and I carry the 30sc version instead because it recoils less and the 30sc HST rounds are just as effective as 9mm HST rounds. If you buy the 9mm Magguts +2 or +3 extensions and use them in your 30sc magazines, you increase the 13rd mag to 17rds and the 16rd mag to 19rds. With 19+1 rounds of HST, you're not losing anything with ballistics by carrying a 30sc. There's more of a difference between 40, 45 and 9m than there is between 9mm and 30sc. Ballistically, there's not much difference between 30sc, 9mm, 40, and 45, so capacity is always king when the ballistics are the same.

Rip Paul we lost a great man a veteran and a 2a advocate

How the recoil compared to 9mm is it more snappy or not

What about RUST , hundreds if not thousands of these Ruger LCP Max have slide rust issues. Its total bull 💩, i have guns i have had 30 years no rust, but i buy a new LCP Max and in one week it rusted . I love Ruger and plan on buying several more Rugers , but the rust problems are total bull 💩. Yes call Ruger they will send you a new slide , but half the guys said the new slide rusted also .

it seems the screws screw big time for this one. screw it.

I'm not knocking your experience with the gun as apparently it differs ,but I own it and owned the original SD9ve and there is a vast improvement in the triggers and it sits at about 5 on mines ,and shoots fairly accurate with no adjustments. I'm not sure why yours is getting a 9 on the trigger, especially when the whole focus was to improve that issue by smith! I also reviewed a bunch of videos on this before I purchased it, as well as even now that I've owned it and very few others had a malfunctioning trigger issue but not many and all seem to think it shoots decent . I myself have put about 1500k down range, and the only issue has been that it does not like Norma Ammo and locks up every time I tried .Appreciate the video and your experience.

Another handgun I’ve been wondering about. Thanks!

Good review 👍🏼 S&w shield is a fine gun , but I’m not sure what niche a 30 SC fits or what problem it solves better than the offerings in a 9mm from Canik or Glock.

Only if I had nothing better to choose from.

thanks for the content. Getting my wife this gun for her 1st real pistol.( 22 LR is not real LOL).

Smith and Wesson Shield Plus in 30 Super Carry: Yay or Nay? Nay. .30 Super Carry falls between 9mm and .380ACP. Kind of like .40Smith between .45ACP and 9mm. Both of these calibers don't have the variety of ammo or availability of those they compete against. Nor do they have the popularity and in the case of 9mm, it is a NATO round fully supported by the military that the others don't have. .30 Super Carry barely reaches 9mm velocities and if anything is a better round than .380ACP which it does better at competing against than 9mm.

I will take a 327 over the 30 super carry I can shoot 327,32 H&R ,32 long and 32 short out of my lcr ruger if not I will carry my 9mm or 380 for deep concealment but whatever floats your boat thanks for the video though stay safe

30 Super Cary will be a nay for me. 9mm works just fine. 9mm is a proven and cost friendly round.

I own a Shield in 30 SC, carry it often, and I really like it. The Shield is a great platform and the SC has great short barrel ballistics and moderate recoil. Avidity Arms recently released their PD10 in 30 SC. Hopefully we will see more handguns in this chambering soon!

After finally getting a 380 for a more summer shorts and t-shirt carry weapon, I'm not sure a new caliber in a platform that is roughly the same size as my 9mm or 45 Shield's that are my EDC is going to be for me.

You really illustrated the trigger difference!! Better than many other reviews I’ve seen!!!

I bought the 7mm Magnum synthetic version in 1984. I love that rifle!

I like the video, great comparison. But you should watch a few videos on how to use your calipers. At about 13 minutes, you stated the the calipers wouldn’t open far enough to measure the slide. Thats what the other end of the calipers are for.

The Riger .380 is not "hammer fired" it has an internal striker. I think it is partially pre-cocked.

454 casull debuted in 59' but was not chambered in any regular production firearm yet. The 5inch barrel looks to be the perfect balance for the 629

Thanks for the review! What brand/model open sights did you opt for? I find the Pmag Mbus 2 doesn't line up for me...

Henry was the first lever action rifle around 1860. Not!!! 1996

No problems at all with mine

Thank You man this video will do his memory good. God bless you and your family.

Please review the Walther PPQ. I have the M1 version. The only difference is M1 is euro mag release, and M2 is standard mag release. I'm know you will be highly impressed.

You don't want a hair trigger without a thumb safety on a budget beginner gun

Good video. Thank you for making it.

How you like the LCP II 380? I have one and had problems with mag drop when shooting, but fixed it. Mine, even with totally fixed sights is pretty dang accurate. Did you have the same problem with the LCP II mag dropping sometimes when firing?

On the barrel shroud.. If you unloosen the hex screw below, and drive the alignment pin out the entire shroud comes off.

Blame it on the meat hands.