Відео

Congrats on having your jeep almost as long as I've been alive! The point of the Slip Yoke Eliminator kit for the transfer case is to swap out the weak factory output shaft for a shorter and stronger CV style shaft/yoke. This style of yoke requires a double cardon joint set up on your new driveshaft to bolt it together. With the main purpose of smoothening out driveline vibrations, taking more daily abuse from the lift kit, oversized tires, etc. This upgrade is a must if you plan to lift your jeep more than 2 inches. I hope this information helped!

Unfortunately, the quarter panels were rotten, the rockers had holes, the windshield was about to fall out with how much rust was around it, and who knew what the underbody looked like.

There definitely was some water damage, most t tops leak from factory, lol.

Me too. If only I had the land to do it, lol.

I agree 100%

Regardless of it not being standard, it is still sad to see a car like this in this state.

Lmao, unfortunately, I discovered that off the camera, there was an insect infection under every seat, and in every door panel 🙃 😅

@@WestCoastConnectionGarage ah thatll do it

The real question is, which version is better? The original by Fountain of Wayne or the cover by Bowling For Soup?

@@WestCoastConnectionGarage Bowling For Soup because I first listened it from them. Greetings from Germany ✌

@thomashoppe5436 that's awesome!!! It's great to make your acquaintance! I only discovered the Bowling for Soup version back in 2022. My friends and I, back in high school, used to sing the song regularly. We changed the lyrics to "Biancas Mom" as we had a friend whose mom was like Stacy's mom, lol. Good times.

Hey, thanks for the comment! I ended up tripling my investment by scrapping the body, figuring out there was a second cataylic converter(then scrapping that), scrapping the battery, selling the wheels, and listing some smaller parts on my ebay page! This was definitely a fun vehicle to mess around with.

That's awesome 👌

Unfortunately, it's been abandoned in my grandmother's apartment for 10 plus years.

No, not that I can recall!

Hahaha, this same vehicle had an insect problem as well 😅

@@WestCoastConnectionGarage lol

Hello, 2000- early 2004, the first variation of the duramax came with no emissions this is known as the LB7 (no egr, dpf, no def), then 2004.5-2005 duramax LLY which came with only an EGR, then 2006- early 2007 duramax LBZ again only came with an EGR (this is the most desirable version of the duramax). Any variation after 2007.5 has an EGR, DEF, AND DPF system. Lastly, I have not seen any video about overfilling these trucks with oil. I simply would not risk it. Be precise and confident when adding fluids.

Thank you, I was thinking of paint matching the bumper and mirrors. It's on the list of things to do, lol.

Thanks

Well said. The 90s cars are the next upcoming classic. Grab them while you can!

Thank you very much. They are actually from a 2002 Corvette Z06. There was a limited production of these wheels, as they were a custom order. They are made of magnesium. I'm able to carry two wheels with 1 arm with how light they are. Made in Italy also. Lastly, the sizing is actually staggered 17x.8.5 in the front and 18x9.5 in the rear.

Lol, unfortunately, this car was far from a parts car, lol. The underbody was so clean, it was a former Texas car. From what I remember, it needed carburetor work, front bench seat re upholstered, and the headlamps were stuck open. When I get a chance to travel Europe I will most definitely be going to visit this car!

Wow, that's quite the story! I'm happy the car is in your hands now! That's also good news with your transmission. A full rebuild may have been 2-3 thousand easily. My original plan was to modify my current t56 for my LS swap, but the amount of extra money it would cost to adapt it I could just buy an ls1/t56 car and be good to go!

Yes, indeed, it is. It was pulled from an 05 TJ

Haha, more like 1.5

Unfortunately, this video was from last year. This car was crushed a while back for sure. It was located at Standard Auto Wreckers in Scarborough, Ontario, Canada.

Ceco Racing Series 70 8 spoke in white 15x7. They are getting hard to come by, I've been looking for a spare for a year, and it's been difficult.

@@WestCoastConnectionGarage god dammit. Well good luck with the search!

Thanks

Thanks for the information! I still reflect on this video and laugh about it 😂

Haha definitely!

The smell resembled more of a low-budget maple syrup with green food coloring 😋 🤣

Haha, Lt1s are great till they break! I do have one sure fix for any lt1. it's called The LS-Juan 😂

Thanks

Thanks for the correction! It goes to show how little I know of these cars. I shall rewatch the fast and furious as punishment 😂

I wish he wasn't actually real.

I never knew maple syrup came in green!? I'm gonna put some on my pancakes next time 😋

*correction time for an LS swap 🤣

@@WestCoastConnectionGarageor just change the coolant hose or not over tighten it ?

Unfortunately, it's actually a pinhole caused by the heat that emits from the engine and the bend that goes into the fitting.

@@black_sheep_ls7620 I had a 2008 Lexus that came stock with a plastic thermostat housing, looked a little like this video before I had me a nice latte coming out my oil drain

@@WestCoastConnectionGarageovertightened n pinched the line?

@busystuff23yearsago15 that gear clamp has been on there for years. Unfortunately, it swelled at the elbow and finally blew. I thanked it for its 29 years of service and then tossed it 😂

Hahaha, as a matter of fact, mine is the first. I shall notify the Guinness Book of Records ASAP 😄

😂 I’m sure my Subaru will never have idle air control valve issues!

​@@sonikmystiqueI may be experiencing this

Thanks for the tip! This car was sold to a good friend of mine, and both the clutch and timing belt will be getting done before the winter starts!

Thank God for editing. Between the actual job, filming it, and editing it, this took about 8 hours, lol. It's so worth it after rewatching it.

Thanks

Morgan Wallen is a Silverado fan, so I thought, why not?

Hello, thanks for your feedback! I took a gamble with this truck, thinking its uniqueness would pay off. So far, it has not played in my favor, lol. So it's gonna be posted on eBay in the hopes it gets to someone who is able to get this truck to its full potential!