- 9
- 43 567
J. Rohleder
Приєднався 11 гру 2015
TV REPAIR | eMMC replacement | NO POWER or BOOT LOOP FIX
In this video I'm going to replace a faulty eMMC memory IC that prevents a Sony TV from powering on.
You can find the part I used in this store over here:
www.mjkelectronics.com/en/11-emmc-mjk-electronics
Since this is my first attempt soldering BGA i want you to be part of it. Maybe i can help someone who has the same problem with the same or a different brand.
The TV model in this case is btw. a 55" Sony KD-55XE9005, but other models and brands suffer by the same problem.
Don't be confused since at the end it's not shown how the TV boots into it's OS. I lost some video footage, but the TV works just as it should.
if you have any questions or suggestions feel free to comment down below.
You can find the part I used in this store over here:
www.mjkelectronics.com/en/11-emmc-mjk-electronics
Since this is my first attempt soldering BGA i want you to be part of it. Maybe i can help someone who has the same problem with the same or a different brand.
The TV model in this case is btw. a 55" Sony KD-55XE9005, but other models and brands suffer by the same problem.
Don't be confused since at the end it's not shown how the TV boots into it's OS. I lost some video footage, but the TV works just as it should.
if you have any questions or suggestions feel free to comment down below.
Переглядів: 38 802
Відео
BeamNG.drive downhill drifting Initial D
Переглядів 444 роки тому
RCC Real Cockpit Connector | Assetto Corsa | Arduino Mega 2560
Переглядів 1,5 тис.7 років тому
Eine kurze Runde auf Monza in Assetto Corsa geht immer - vor allem mit dem richtigen Feeling durch ein Tachocluster aus einem alten BMW-E36! Angesteuert wird das Ganze mittels Arduino Mega ganz einfach über die USB-Schnittstelle. Stromversort wird alles über ein altes ATX-Netzeil aus einem PC. Das ganze lässt sich natürlich noch bis auf's letzte aufrüsten (Anzeigen für Reifentemperatur, Reifenp...
Bilster Berg für Assetto Corsa
Переглядів 4347 років тому
RTB Nachbildung Bilster Berg V0.5 für Rennsimulation Assetto Corsa
Festplattenmotor als Lautstärkeregler
Переглядів 3947 років тому
In diesem Video zeige ich einen umfunktionierten Festplattenmotor, mitdem man die Lautstärke eines geschlachteten Kassettenrekorders verändern kann (als Ersatz für den Inkrementalgeber). Verwendeter OPV ist in diesem Fall der LM358. Es sollten aber auch andere Typen einsetzbar sein. Q0 und Q1 einfach an die ursprünglichen Eingänge anschließen, und es kann los gehen!
Ampelsteuerung mit CD4060 (verbesserte Version!!!)
Переглядів 5757 років тому
Dieses Video zeigt die verbesserte Version der Ampelschaltung mit dem Conrad Adventskalender 2016. Hinzu gekommen ist die Möglichkeit, einen "Haltewunsch" abzugeben. Genauso wurde das Problem gelöst, dass die Rotphase der Fußgänger zu spät einsetzte.
Ampelschaltung mit dem Conrad Adventskalender 2016
Переглядів 9717 років тому
Diesees Video zeigt eine Ampelschaltung bestehend aus den Bauelementen des Conrad Adventskalenders 2016 Mehr dazu hier: www.elektronik-labor.de/Lernpakete/Kalender16/Kalender16Contest_3.html
DIY LED Audio Spectrum Analyser
Переглядів 5818 років тому
Sound mal anders! Relativ einfach aufgebauter Spectrum Analyser bestehend aus knapp über 250 Led`s und ein paar OPVs, welche bei dunklem Raum recht gut performen!
Hi, my sony is stuck in footloose, KDL-55W800C, how to find out the eMMC I need to replace -thanks
This was so satisfying to watch for some reason. Thanks.
You didn't have to program the emmc IC? Worked with no coding?
Next this tv will have another problem: a purple double image.
After the tsop is replaced netflix doesn't work and you get an error code ui-800-3 and ui-113. I think it has something to do with bytes of information stored on the tsop for the user name and password on the netflix account that can't be transferred to the new tsop. If anyone has and information and would like to chime in on this subject it will be interesting to hear what anyone has to say on this issue 🤔
First of all, congratulations on the repair. I have a question. After cleaning the tin and adding flux to place the MMC I don't see you apply tin again. How is that? Greetings.
Hello my friend, where did you purchase MMC, is there a Sony part code?
If I’m not wrong you sound like you’re German, I tried ordering from MJK but they seemingly don’t ship to Germany? How did you get one? 😊
we ship to germany, no problem.
As often as these chips seem to fail or go bad, why in the world would the TV manufacturers make this a soldered chip on the board? Why isn't this chip set up as a user/technician replaceable item that can simply be ejected and re-inserted from a slot or socket on the side of the TV? If this is just a MMC (Multi-Media Card) weren't those originally designed to be used as consumer memory/storage cards that you could easily slide in and/or eject from a device? Why can't that same thing be done on TVs then? Wouldn't that cut way down on repair times and costs?
Probably because it makes them money if you can’t easily replace it as user, I mean hot air soldering isn’t necessarily the hardest thing you could do but it’s also not easy as well
@@seesikopter I'm sure it has to do with cost of production, too. It's the cheaper way to do it. I'm just saying that it would potentially save a LOT of people a LOT of aggravation, hassle and frustration if that particular part could be easily field replaceable.
@@michaelbeckerman7532 I know but Sony doesn’t care, so many people will no longer buy their tvs because of this
@@seesikopterthere is no tv in this world which lets you replace the emmc without soldering. 😂
@@gicugigel3790 well Sherlock, the talk was about „why it ISNT like that“ as the mmc format was meant for portable storage back then
What hot air station is this?
You friggen rock! Facing a similar fault with Hisense 55” but not sure if the firmware is available. Factory will not supply it beyond 2 years. Dirty company. I think video is only missing a quick mention of pin #1 position on the bga package. Thanks for sharing.
Nice, thanks for sharing
I have an ignition problem, testing all the power supplies and cards, the conclusion is emmc, where I would like to try a reballing first. then if it doesn't work, move on to purchasing an emmc, but I can't understand if I find it already programmed with a default Sony software or it must be programmed. Where can I find the software to insert into emmc? Thanks for your help
I have a sony android tv and I can't login to Google play store. I open the application, but nothing happens when I press sing in.
Is it necessary to program the emmc or is it enough to put a new one?
Yeah I have the same question. I believe so, and unfortunetly I cannot find an EMMC that is programmed for my TV...Unless I buy an entirely new board that includes a working one.
Yes, you have to program it or get in contact with someone who can program it for you. If you just order the barebone chip nothing will work, because the entire OS for the TV is missing.
@@j.rohleder3794 wait so that means the chip when programming gets the TV firmware put on and then u solder it on there and no need to reinstall the TVs OS? I thought you just tell the chip what its gonna be when installed so it properly works and then you flash the software file onto the Device... hm
Could you please confirm, that if the voltage is present the chip is dead? This would really help me big time.
That's true. If the voltages are present and nothing boots the IC is damaged.
1:10 Do you really mean "if voltage is present it's faulty"? Or the opposite. And could you point out the exact measuring points?
Excellent salute you.
Thank you! I'm trying to flash a Hisence 65H9EPlus TV, IC is MXIC MX25L1606E, I made the CH341programmer read the file and saved the backup to my desktop, i'm ready to do the flash.... Question: where do I find the bin file for this model? I just need the last step to complete the flash......
Thanks for the video, I was worried that I'd have to reball the chip I bought from mjelectronics, but it looks like it's already got them!
Yes, just ask him kindly if you need the reballing on the chip, so you don't have to order the stencil.
Hello Sir, can I find rt809h emmc dump for Sony KD-55X8509C ? thank you sir in advance.
I got it
Netflix not working?
You can repair it by usb or by jtag
How?
If it’s boot looping them sometimes by usb can work but otherwise jtag is the only way
and netflix ? function or not ?
Para remplazar ocupas hacer un full dump y Factory reset ala memoria y pasar el dump y montar
After removing BGA, add flux but then flood area with leaded solder, then wick off.
That’s exactly what I do, I don’t lose pads 99% of the time
Not to mention.. clean that soldering tip if you want heat to transfer correctly. Don't be tight with the braid.. new, clean braid and add flux if you need to. Flux and a clean tip are your friends. Just saying. It works - good job!
Sir do you have telegram account? Can i get emmc dump file of this sony board?? 🙏🙏
I don't have the dump file. Please refer to mjkelectronics.com. Maybe he can help you out. Link is in the video description.
i have a question sir .can we use mobile emmc if we don't have led tv emm? If yes how?? I have cleaned rpmb but not working.
Thats a nice idea, but i don't think every BGA-153 has the same pinout. If it doesn't, you have to match all data lines, cmd, VCC, ... between your mobile eMMC and the layout of the original TV PCB (just soldering it in place might not work). In addition i'm not sure how much the NAND flash controller of your mobile eMMC differs compared to the original one. I didn't tried it, so i can't help you - sorry.
@@j.rohleder3794 I Have connected all those fly lines do cmd clk short the crystal.or used directly with bga adapter but dont working with same emmc 153 pin .there may be a way we can use mobile emmc .because its just a memory.by the way thank u for your reply sir🙏🙏🙏god bless you
No you cant the firmware inside the Phone emmc NAND flash is partitioned for the phone, and there is no firmware for the TV on it so it means it must be erased and reprogrammed, if the chip has the same Pinout and voltage like the original NAND chip
You can do that but it needs to be a compatible emmc from your phone, then you need to wipe it and write the firmware and maybe also clean the rpmb which can’t be done on all emmc
Very cool, where did you get a New programmed and reballed eMMC from?
I got it from MJK electronics. www.mjkelectronics.com/en/11-emmc-mjk-electronics
Cool ich wünschte bei mir würde es funktionieren
How to make it..???
Du musst mal tanken :D
Hey das ist Hammer gei . Ich habe tacho Lenkrad und Amanturenbrett von e36 wie kann man das den mit playstation 4 anschließen. Were cool wen einer mir das mal genau erklärt. .. Danke in voraus
sehr geil habe ich auch in der naechsten zeit vor, benotige nur noch das netzteil :D
nice, kann man sich den Track irgendwo downloaden?
Kannst du mal den Schaltplan verlinken?
Klar! Ist leider auf russisch, aber dafür nachbausicher;) Link: radioaktiv.ru/shems/sound/filter/27930-10-polosnyy-analizator-spektra-400-led.html Als Stromquelle habe ich ein altes ATX-Netzteil verwendet, und für den Vorverstärker / Bandfilter kamen ganz normale LM358er Operationsverstärker zu Einsatz; es gehen bestimmt aber auch andere Typen.
vielen dank😀