Відео

Awesome tutorial, all I have to do now is order my parts , thanks from Tokyo for posting the step by step .

Awesome tutorial

Could you maybe explain to me what tools would be required to replace the door lock actuator?

Thank You - You walked me through the whole process. I've become a weekend wrench turner due to everything costing so much. I do have a ? --- there is no torque anywhere for tightening the window clamps ???

Thank you for the suggestion to cut up the old regulator, which is what I had to do. My job is half done. What's haunting me is, do I have to somehow synchronize the motor to the regulator while re-installation is in progress?

Hello Sir, do you have the link for the regulator? The one that I found it states only fits convertible model; but my car just like yours, hatchbacks.

Thanks. Save mutch Money for my mother in law, so i can fix the Problem. ❤

I replaced my 2001 vw beetle driver's side regulator and motor in 20 minutes..one of the most easiest to do

Did you put the white clips back on? I didn’t see that in the video.

We got the new regulator in and the window goes up and down but when you shut the door and the window raises up it’s still 1/4” too far down from sealing. Any ideas?

Thanks mate ! You are so calm and relaxed and cool. So nice to watch !

Question you know the back window at the bottom has the rubber trim could that get covered up or replaced without removing the entire glass?

Great Tutorial, for some reason folks can't be bothered to do these videos over here in the UK, you just saved me a lot of hassle ........ many thanks indeed from London England.

where can you get the part cheaper? im having that issue rn :( help

Very well done and well captured video. Thanks for the share!!!!

Excellent video. I have the same issue and have taken it down to the motor and regulator. Wondering if you have part numbers for the regulator. I checked the motor and it is good. Our bug is also a 2015. Thanks again

tqtq😊😉

Very good video. Was able to replace my wife's window regulator using this tutorial. Thank you very much for posting it

Great help, thanks!

I would have liked to see how you cut the wires.

Awesome video. Saved a fortune on labour costs following your guide. Thanks.

HELP! My 2015 needs a new regulator & window is stopped a couple inches down. How can I get it up until I can get a regulator? Can I just insert something into the regulator to crank it up so I can just leave it up until I can fix it? Desperate to know before I take off the panel wires & motor only to mess something up, find out I can't, & be clueless how I might do it :o(

Great video as I am just doing this job! I do have a problem, though. As I was putting the window back it I didn't here the click so I pushed down on the window causing it to go down about 6 inches so the alignment is now off and I can't tighten the window closest to the side view mirror. I tried using the motor to hopefully bring it all the way up but it stops exactly where I pushed it down to. Any suggestions?

Thank you very much for this tutorial… got my daughter’s regulator replaced using your guidance!

Hi there. I have a 2015 VW Beetle Classic. It does the same thing here in NYC. I have a quick fix for this issue, which seems to work for me, is to spray window washer fluid on the glass. Make sure the washer fluid is for cold temperatures. The solution avoids getting stuck outside of the car. The washer fluid keeps the windows from freezing, Secondly is having the car warm up with the heat on pointed to the windows. (With a remote start system installed). I think the problem is the pinch sensor for the glass windows; VW should remove that piece of tech.

Thanks man. I just did this on my wife's bug and this is the ONLY video or anything that tells you what to do. I almost lost my mind when I took the door panel off and saw all metal and couldn't even see the window. Luckily I found your video. Thank you so much!

You make it seem so easy! Can you tell me how can I remove the side mirror for beetle 2012? Please! Thanks!

Hi there, thanks for putting this video together. It’s very helpful.

hey bro, is it normal for the window lift to break down on the 2015 beetle? it's the second time it breaks. would like to know if there is any way to repair that detail once and for all and that it does not happen again, any tips? Here in Mexico it costs very expensive to repair it Volkswagen dealers

This is an incredibly helpful and well done video; thank you so much to Urban6969 for posting it. One piece of advice: the yellow electrical connector that is unplugged at the 4:00 minute mark is the side impact airbag sensor. If you turn the car on with this connector disconnected, it will trip an airbag fault that does not clear automatically. My advice is that if you want to test the window operation prior to reassembling the door, be sure to reconnect this plug at least temporarily before you turn the car on. To clear the airbag fault light I bought a BlueDriver ProScan Tool at Amazon. Many cheaper scan tools only do engine codes - this one explicitly supports airbag codes for VW. I used the "common dash lights" scan (took about 10 minutes) and reset the code - all fixed. Another piece of advice, we had to actually pull the window up in its mounts before tightening the window retaining bolts. The first time we installed the window, it was about 1/4" to low to close completely. Thanks again to Urban6969, I never would have attempted this without his video and I never would have figured out that I had to cut my cables as well to get the window out (my window was stuck in the down position). My VW dealer wanted $600 for this repair, but it cost me about $240 (including the BlueDriver tool).

awesome video

Can the door latch be removed without removing the outer door skin?

Bro great vid I had to do one on my gf car n it was a life saver good you were very informative and explained everything keep it up

It’s absolutely beautiful!