Відео

finally！

Can I use 8000mah battery with this ? How many flight time will it get with 8000mah ?

oldguyFPV; Kool! Fly safe, fly free!

Cool. I just got an x4 today and I was thinking of trying this. How did the drone handle with the weight?

Good and tight on those housing screws is all well and good, but Gutund-tight ist besser😂. Source: I worked for BMW Manufacturing and a host of other German companies most of my career.

Great smooth flying and the gaps well done

Pls pls pls tell me that is a public field anyone can go flying pleaseeee lol I have been looking for a place like thaT IN GA

Hey how did you mount the gopro 11 on there?

Great review, would you know what angle is the O3 camera set at?

On one of your setups, you have the monitor mounted on top and it appears you have hdmi to mini hdmi cable into the camera. If so, is that a 90-degree mini-hdmi end? If so, can you provide a link for that cable? The 90-degree option is ideal. Also, in a reply you stated you use the NP750, but the link you provide is for NP970, which amazon shows as a battery for Sony. Will the NP970 work?

Isn't this going to damage the camera since you are putting 12 volts into it through USB-C? Out put on those batteries is 7.2V, bot sure if the plate has a transformer in it to bump it up to 12V? Do you know. Thx

what software do you use for the through the wall effect?

Thank you great info, I just went ahead and got a spare tire kit, to me it makes more sense. Shame that these manufacturers are cutting cost by removing the most important safety device in cars now a days and piling up more "safety" features that don't really make your car any safer! What will happen to the TPMS sensor after filling the flat tires up with this goo stuff? Will they need to be replaced?

A GPS from RDQ or Pyrodrone is like $15-$25 depending on size and functionality. No real need to buy a whole new quad. They even sell GEPRC GPS units if you want it to all be GEP. Just saying.

Good to know. Thank you!

great video, thanks for the infos

nice explition and flight, i want to know... its possible to mount a Walksnail moonlight on these frames??

Great video, really enjoyed your content! I'm eyeing this one and am VERY tempted to add it to my fleet : )

Why not BF 4.5 with all the GPS stuff corrected?

So a question from ignorance. What is the slime for and why cant it just use the air like a regular pump?

A great video, I've been interested in the two quads for a long time. At the moment I'm well taken care of, but if I were then I would choose the larger of the two.Always have a good flight 🫡

Good video on the pump tear-down to get the canister out, but I have some concerns about the product you are showing and its use. So far the only Slime "2 in 1" sealant I see says to NOT use this on highway passenger vehicles. Are you sure you are using the correct stuff? This product appears to be for bicycle tires and farm equipment tires (e.g.: tractors). The one you show at 3:10 popping up appears to be for highway vehicles but that doesn't appear to be the same one you show in your hand in the video. Am I seeing this wrong? You don't want to be using the non-highway version in a motor vehicle. I also have concerns about using it as a flat preventer as you suggested. Yes you mentioned you did it on tires on implement items (wheelbarrow, etc.) but I don't think it's even a good idea to mention it here at all in the context of a motor vehicle as it could be misconstrued as OK to do so. The highway product version contains various warnings about it possibly causing vibration, and I would have concerns about its effectiveness if it's in the tires for thousands of miles and heating up and cooling down, etc. over and over when it's meant for a temporary tire fix only. Also, the tire rotation pattern is that the rears go to the front, but the front go to the rear and get swapped side to side. This means that if the tires also are directional, the front-to-swap-side-rear tires must be dismounted from the rims and swapped. This negates the use of the sealant in those tires in a preventive manner as they will be breached when doing a rotation properly, and will also be a mess for a tire shop to deal with. It will be a waste. Lastly, the product you linked to is no longer available. Amazon lists a replacement version which is in a pressurized can and you won't be able to even do this procedure. Yes the genuine Ford product is 3-4x the price (appears to be part number KR3Z-19554-B) but this is tires and safety...not a place to prioritize by price.

An other pineapple !

Is the only reason to replace the kit (as Ford recommends) is due to the sealant decaying?

nice info.. thanks

so i just stick double sided tape in the mounting bracket to reduce vibration? does the drone camera shake because the mount is shaking also?

The prints you made under the engine also fit on the Tinyhawk lll plus Freestyle HD

Had plans to buy a mini 4 pro. I won't dump my $ in a drone with overheating problems.

DJI should totally pay you for this :D

Duuuude this video save my life, I accidentally turn On my googgles at the first time and put it on chinese, hahaha, Thaaaaanksss!!

Hello. I bought Mark 5 and I have this question: Have you had any problems with the connection between the DJI 2 remote control and the drone? was there rx loss?? Thank you!

My 2016 Ford fusion got a flat today ,I was surprised to find what I alway thought a silly little gadget actually worked!, it got me going again, and to the tire shop. Thanks for the refill info!

nice glider

that was awsome, so i just ordered the GEPRC LR Tern40 and i cant wait to get started. you mention you are in GA, do you offer classes? I have only flown DJI and this will be my first FPV. there are so many videos out there that is a little overwhelming starting with betaflight lol. jeez

hey I just got the geprc mark 5 and the dji FPV controller 2 and I can't get it to fly the drone when ever I hit the top back right botton on the controller the drone starts beeping and the motors twitch a little tell I hit the botton again and that's it nothing else works could you give me any insite into this problem

I only have a low tire. Can I still use the compressor just to put air in the tire without using the sealant?

How long did the camera run with the KONDOR Blue and the NPF-750? Did you shoot @ 8k60?

Links aren’t working

Muchas gracias, me has resuelto el problema

Nice flying! Is it the 6s version? And what’s the takeoff weight (drone+battery+gopro)

Thanks so much for this! Your ideas were so spot-on. I immediately went to order a plug kit to carry in the car, and exactly as you suggested, added my oldest pliers and a pair of old gloves to the kit. A reminder for people who use the plugs... The plugs (depending on brand) can harden up a little over time, and they may also be worth replacing every couple of years.

God bless you! I could not figure how to open the device without your video

For anyone wondering... The reservoir is 16 ounces. I got a 16 oz bottle of slime at O'Reilly's for about $15.

Even my Ford fusion from 2015 uses the same kit. It's been sitting empty in my trunk for like 2 years! 😂😂 Thanks for the video. Good tip on the repair kit. Not like it's gonna help me sitting in my tool box at home!

You totally are the best. Thank you

🌟The more you know🌟

Awesome!

You really solved my problem, thank you!

Love your videos, im gonna buy the GEPRC MARK5 HD O3 soon but I got a quick question. I also have the dji fpv controller 2 and the dji goggles v2. in the geprc app witch option do I use for the dji controller and goggles. like 6S PNP or 6S TBX NANO RX or 6X ERLS 2.4G. Im really confused about this part.

Is that the radio that comes with the dji racer?