Відео

You are not wrong... I should make one!

@vinceb5985 To be fair, I need to make one too lol. I have some 12V CPU fans that I'm thinking about using

I use about 300 and 40% airflow!

I've already started it :) dont know if we will get a full pt 2 tonight (we will have to crack on from a few bits I did as forgot to press record) :) It's a lot more together than it was for sure. The next week, tomorrow until the following Wednesday I am back in the office full time for the week so it's going to be slow going. Recording and waffling away adds so much time to a build.

@@vinceb5985 it'll be awesome once done, I just know it. Thanks again mate

Taking modern screens out of things is just not fun. Did a Microsoft Surface pro recently that was a similar but longer job than this.

@@vinceb5985 I'm glad I got you to do my build 👍

Any time buddy! You know I live working on your toys!! 😊

Awesome - I will add these to the build - All we need to do now is wait for a screen!

Can't wait mate. Looking forward to part 2 also 👌

Would have been nice if the screen was what we were looking for, but never mind I have a new one ordered in from Funny Playing so as soon as it is here we will get on with PT2 :) @@keithknapp8807

@@vinceb5985 cool. Looking forward to watching it come together 👍

I am in Essex and the Garage is in Great Wakering. Give me a message on 911uk if you are after more details. As for the hard top, mine is actually very quite, certainly less crashy than the soft top. Have you checked that both ends of the adjustment nuts for the top are nice and tight. I could imagine it being really noisy if they aren't.

+sergio anderson I had similar problems with a later build of ARUnchained. What version of that app are you running?

It was a beta version. I have the official version now and it works fine. Just wish my phone screen would time out and stay active on the app radio.

Get yourself an app called task scheduler along with another called screen standby, you can schedule the screen to turn off when the mhl is plugged in or when the Bluetooth connects.

+sergio anderson can you tell me wich Version you got?

The head unit is a SPH-DA110

thanks for the reply vince. managed to get everything working pretty much the same as your setup. i used the standard usb port for the mhl/hmdi adaptor. i also bought the cd-iu201n cable for the ipod functionality for a 30 pin ipod connection. this is where the pin usb connection is required to be used to allow the ipod to playback and have direct control. had my friend install in my car as some bits where tricky with it being a astra. he just soldered the brake cable to the earth wire. seems to have done the trick.

This is the kit that comes with all the required cables: www.pioneer.eu/eur/products/25/299/301/CD-AH200/page.html It is basically Pioneers own MHL adapter.

Glad to be some help. The custom launcher that I am using is called Apex launcher, it allows you to scale things better when the phone is in landscape adding more rows/columns and scaling icons. It just works better than HTC's sence standard launcher. I didn't change anything to get it connect so quickly, although I do run AR unchained as a service, giving it access to boot time supersu rights. This means I don't have to launch the appradio app and get things connected, its ready to go the second that the phone is booted and connected to bluetooth. I have had a look at the G2's specs and there doesn't seem to be all that much of a hardware difference between it and the M8 so I guess the speed of the phones hardware shouldn't be an issue. I did have some teething issues and spent a few weeks messing about though.

Thanks for the answer. The G2 uses a slimport adapter rather than MHL, and suffered from lots of screen cut out and snow even with the official adapter. Apparently MHL just works a lot more reliably. I bought the official Pioneer adapter too to be sure. I have ARU set to start on boot but even so it takes about 20 seconds with the app icon showing it is syncing before it cuts to the phone screen, and then it shows just a blank desktop screen with a home and back button that doesn't respond. I have to press the power button on the phone a couple of times and swipe unlock the screen before it does anything which is a bit annoying even with no security setting switched on. I tried using different lauchers such as Nova an Apex and it doesn't make much difference.

Also will it work with a Galaxy Note 4 considering its quite a new phone, Thanks

Hey buddy, no problem. I will have a little look around and try to work out what my one is. I read a shed load of samsung related info (seems to be most of what is available out there on the web) and people seemed to get this running without that much issue. Ill see if I can dig you out a link.

Hi Mate, yes I did install the GPS antenna, the unit comes with one and your phone can pass off to that antenna to save battery, with android you can use an app called arinjector to use the unit gps rather than the phones.

Radio reception is also good on the unit, no complaints so far. Certainly better than my old unit.

HI there, I have had a look and can't find any people that have confirmed it working with the moto x 2014, but in theory, it runs android, is mhl compatible so there is no reason it shouldn't work, the adapter I am using is this one: www.pioneer.eu/eur/products/25/299/301/CD-AH200/page.html - I can see this on amazon but for some reason the pics don't show the full kit. Wiring for it is simply hdmi into the back of the unit and into the back of the adapter. Then there are a couple of usb's off of the back, plug one of these (can't remember which one but it is a certain one) into the back of the mhl adapter. then route both of these to somewhere for the phone.

Vince B Is the USB just used for power? Could I theoretically plug the HDMI into the adapter, then the adapter into the phone... and then route the usb micro input into a cigarette lighter?

***** Hello mate, sorry I missed this message. There are two usb's on the unit and one is specifically to provide power to the adapter. There is no reason that you can't route cables as you suggest.

If your new to rooting phones then you should use a walkthrough, something like this link to guide you through the process: htconeroot.com/htc-one-root/how-to-root-htc-one-m8/ It can be a bit daunting but take a backup of the phone and its rom before you get going. Standard carrier roms are also available from HTC dev center at this link: www.htcdev.com/devcenter/downloads/P00 You will need appRadio Unchained, I donwloaded this apk: www.mediafire.com/download/tq6udw3tewtuyll/arunchained0.15.apk

Yes mate that is the right adapter.

The note requires a different adapter, I was reading on the net and came across a site apparently there is a samsung adapter that you use along with a standard usb cable. The pioneer cable will not work with the note. I think this is the one you need: www.mobilefun.co.uk/samsung-galaxy-s5-s4-note-3-4-mhl-2-0-hdtv-hdmi-adapter-p38702.htm?referer=PLA&Bproducts&Bproducts&currency=1&gclid=CjwKEAjww8eiBRCE7qvK9Z7W_DgSJABfOjf2hfqUnIxTnFsXdIx9vxQ_GhxRliSAKSby9YxBWN4aVBoC3ofw_wcB

This is the wallpaper, although I found a higher res version somewhere on google: mkalty.org/porsche-logo/

Anything specific that you would like to know, just post up here and I will reply the best I can.

I'D recommend getting a bypass. To just get rid of annoying messages.