Відео

i think so speeduino.com/forum/viewtopic.php?t=5602

but it seams like its a bit tricky

@aftereartharcade is it a new frontier or is everyone being secretive someone announced on hp tuners forum they had a breakthrough last year stand by for updates I text the guys company the day before Halloween they replied keep checking up on social media

Gotcha so if i like keep a brick on the break peddle and then use the pump would that create the pressure needed?

Hell ya bro you are a BEAST!!!

You will. When you are comfortable try scapula retractions every day you are not resting. This greatly helped me get to a pull up. I also had to do negatives using a box to get above the bar and lower myself down for weeks before i could get one :D . You got this!!

Hell ya!! Love to hear it koopa :D you gotta teach me some day rofl

Sick you are so strong for 14! I'm hella inspired i want to be able to do 100 pull ups some day. Good luck to you too keep the grid up <3

Its less then 1 hour job for the shop... $200 per hour QQ crazy. I'm sure you know this but its good to check the battery before you replace the starter. Junk yards will sell very cheep tested battery if you are in need of something inexpensive.

Thanks for the comments! :D This U4C has 4 channels and can do up to 8. You pair 1 channel to 2 cylinders. dropbear from my understanding has 8 so you should be able to do a v12 with a drop, but v04 boards like the one the u4 is based on have 4 channels. more info in link wiki.speeduino.com/en/boards/Dropbear

Hey! i get most my stuff from harbor freight. They are affordable and worked out for me. The extension is the first link and the red breaker bar "extension " is the handle from the jack in the second link. www.harborfreight.com/wobble-socket-extension-set-9-piece-67971.html www.harborfreight.com/automotive/jacks-jack-stands/3-ton-floor-jack-with-rapid-pump-red-56624.html

The break like goes into the wheel cylinder. Sometimes if the line is old or you over tighten it can leak. check to makes sure you have a snug connection after its bolted to the drum back plate. Post a video if you want ill try to help.

is it a 180sx? love the hatch s chassis! You got this dood :D

Hell ya!!! I'm still working on it. This summer has been brutal, but its more that I got pulled away from this project due to work, and some other personal things, but it should be out before the end of the year. Shooting for sooner rather then later...

Well I can't say how good it is vs other ecus, but you will have options on how you want to run the K24. Depending on how you want to set up the spark and what kind of injectors you are running. This U4AC has 4 channels for spark so you can run each cylinder, but for 6+ you need to set up the spark in pairs. wiki.speeduino.com/en/wiring/Injector_wiring. The big thing here imo is you can us MAP to get your fuel tables and thus adjust for boost levels. A speeduino does the same thing as a megasqurit or something but for less. As for the BMW canbus thing. I'm not exactly sure. From my understanding canbus is a protocol bmw seams to have some of its own other protocols too. medium.com/@chairface/talking-to-your-bmw-tapping-into-a-cars-communication-bus-4adff7ac640d It doesnt seam like the canbus is fully implemented for broadcasting functions for the speeduino yet. So ide image you would need to do some custom things if you are trying to control things over can with this ecu, or if i was you i would join the forums and ask there.

@@aftereartharcade that wiki link was helpful, it looks like speeduino can work with the analog bmw's before 1999 when they went to canbus system. Thanks bud!

wiki.speeduino.com/en/CanBus_Support2 Yes it looks like you can.

Awesome! Ill for sure look at that! Its been difficult to find where that leak is coming from. From what Ive been reading it could also have a leak in the valve train too like the stem seals. Thanks for the comment :D

I did end up breaking the dry ice up when i tried to use in the car. It worked, but it cost a bit and is hard to work with, but its satisfying when you do get pieces off with it.

You got it Fred! Thank you for the encouragement! I've been dealing with some personal issues, but we are working on the next few videos still :D

Sick, Good luck with yours! AW11s are sweet, glad I could help out!

Yooooo i got mine 3 days agoo

@@aftereartharcade thanks!! glad there's recent stuff on the aw11, imma edit when i finish the oil change

I think kind low due to how the diesel engine works. They don't fire injectors or spark the same way. but if you understand how DE work you can probable adapt the code to do it, as it is open source.

speeduino.com/forum/viewtopic.php?t=657

@@aftereartharcade super helpful! Thanks man!

Hell ya that is awesome! I appreciate it :D I'm working on the next video in this series, but some life issues have gotten in the way.

Thanks for the feedback! Kinda reflects my personality people say I'm more helpful when muted tooo... >< Anyways I'm still learning all the yt stuff so i appreciate you telling me the music is to loud.

Yeah we can work something out! I'm still learning myself lol but maybe together we can figure it out! Im wtmk_bk#8448 still working on the After Earth Arcade discord but feel free to message me. Tuesdays would be the best time for me.

@@aftereartharcade sweet man I added you . Much thanks 🙏

Hey! Thanks for reaching out and letting me know. I tested with a multi meter and I'm getting some ac voltage when connecting to the 120 degree signal and the negative then rotating. Also it produces a RPM reading in tuner studio. If I remove the VR conditioner then jump direct and pull up as you say I no longer get an RPM reading in tuner studio when rotating. The meter test suggests its a VR and it does work seam to work in the VR configuration and described. I don't doubt that it maybe a hall signal, but why then I'm not getting a RPM reading when setting it up as you specified? What are some other things I can check to verify?

@@aftereartharcadethe ac detected could possibly be interference? Is your sensor wire shielded?

@@lundyracing I think you are right that it is interference. i realized that this is an optical sensor... so it really should be hall... that is why lobotomyy was trying to say.

I'm hopeful if you follow the videos you should be able to put one together yourself. I plan to show the full process of hooking it up to our z31. Even if it blows up :p . Sending out assembled speeduinos is a service i could provide, but to hook it up the the car you would need to do your own wiring or we would have to put a harness together for you. That could be expansive :< but what engine are you running?

Ka24de ! And I bought the exact parts as you . Having issues with tuner studio.

@@thomasjoyce8374 Oh sick! Did you install the firmware with speedy loader? If so what issue do you have with tuner studio? Do you know what injector and ignition set up you are running?

@@aftereartharcade I followed the video step by step (amazing video btw) I wrote down the error code it was throwing , something with the imi I think. And I downloaded the most current version with speedy loader . I'll add you on discord sometime soon

Thanks for the info! :D The one i bought from WTMtronics was a CH340 but that was late last year.

Hell ya! That thing is going to sound sick!!! What transmission are you using? AW11s are so coool

@@aftereartharcade LSD 5 speed from a Sentra. :) I've figured out how to adapt the axles/hubs with off the shelf components, I believe. Still need to actually mount everything and all. Just have other projects to finish first. Down the road I may try to import an X-Trail VET engine, but that's way in the future.

Glad to find someone who can relate :p

I like that name very cute :D Fitting of this car. Idk people like to talk smack about the Yaris, but its a very dependable car and i think the hatch looks cool. (The sedan is cool too lol) Ours is DD or delivery driver :p . But im thinking about changing the name to Yaurirtle and seeing if we can make it look like a Squirtle lol

We are at 201k right now! Hell ya the 1nz is really good. If its not burning oil it was taken good care of. I use Chemtool b12 every other oil change.

Appreciate you Neet! Im trying to level up!! Megan has the most economical, but lots of good reviews on the BC and they are just a bit more. I decided to go with KYC struts they are $60 and OEM like. Getting the car back on the road is my first goal. Ill probably upgrade to the ground control lowering spring kit in the future.

That is the one! --$ :D

Thanks for the information! That is kind of why i did it to see if others thought it was bad idea. We use to use wd-40 for everything, but you are correct. DON'T USE wd-40 live an learn (i did say don't quote me rofl). I was out of break cleaner. Ill go get some and and use break cleaner. I ordered a new axle and it'll be in before I drive it anywhere.

wd40.com.au/uses/whats-the-best-way-to-clean-brake-rotors#:~:text=Can%20You%20Use%20WD%2D40,No. Also the web sight says you can so idk, but ill use break cleaner anyway

Haha thanks Koopa! I'm glad i have friends like you :D I think i enjoy the chaos. If it got to unmanageable i would have.

at least you get it! 👊😁 and the music you use is always so good! just say'n lol

@@aftereartharcade 😊🙇‍♀️ thanks alot.

Yes! The U4 can run up to 8 cylinders. They also make a plug and play called a dropbear. speeduino.com/shop/home/38-speeduino-dropbear.html