- 91
- 117 570
Jackson O'Donal
Приєднався 1 лис 2017
Harbor Freight $10 Tow Hooks On The Trooper
Installing 10 dollar tow hooks from harbor freight on my 88 Isuzu trooper.
Переглядів: 163
Відео
New HKS blow off valve for my 02 WRX
Переглядів 1452 місяці тому
Installing an HKS blow off valve on my 2002 Subaru WRX. Ran into a few issues not in the video such as that whining noise heard in the driving clip. A screw had fallen off inside of my BOV and I took it apart to rebuild it. Works as it should now but I didn’t record that part. Might make a separate video about that soon.
Making A Rear Bumper For The Trooper
Переглядів 9663 місяці тому
Finally making a rear bumper for the trooper. Sorry it’s been so long since the last video I’ve been very busy. Hope you enjoy the video.
Isuzu Trooper Custom Exhaust Setup
Переглядів 1,3 тис.3 місяці тому
Isuzu Trooper Custom Exhaust Setup
2002 WRX Valve Cover Gasket
Переглядів 305 місяців тому
The valve cover gasket was leaking on the exhaust and I figured I would make a video out of changing the gasket.
Fixing Rotted Strut Towers On A 2002 Subaru WRX Wagon
Переглядів 2136 місяців тому
In this video I fix the rotted out strut towers on my 2002 Subaru Impreza WRX.
Off-road In The Isuzu Trooper
Переглядів 7 тис.6 місяців тому
Figured I would go down a trail with the project trooper since we hit 200 subscribers on the channel. I can make a much longer video if you guys are interested in this kind of stuff and I’ll get a camera man next time.
Isuzu Trooper Frame Repair
Переглядів 2418 місяців тому
I finally repaired the rotted out section of frame on my trooper that kept getting worse and worse over time. Made a body mount for it as well. Hope you guys enjoyed the video let me know if there’s a different way I should have repaired this or if you like the way I did it.
Isuzu Trooper Paint Correction and Torsion Bar Crank
Переглядів 1,8 тис.9 місяців тому
Polishing the trooper and showing how I cranked the torsion bars to lift up the front end.
1988 Isuzu Trooper Shock Replacement
Переглядів 1,3 тис.9 місяців тому
Replaced the shocks on the trooper finally. Took off the bent bull bar on the front as well.
1988 Isuzu Trooper: Rear Frame Resurrection, Finished
Переглядів 30511 місяців тому
Finished rebuilding the rear of the troopers frame and it turned out good.
1988 Isuzu Trooper: Rear Frame Resurrection Part 3
Переглядів 22711 місяців тому
Welded on a bunch of brackets and body mounts. Finished off by putting the back part of the frame on as well. Next video I might make the rear body mounts and attach the lead springs to the frame.
1988 Isuzu Trooper: Rear Frame Resurrection Part 2
Переглядів 97411 місяців тому
1988 Isuzu Trooper: Rear Frame Resurrection Part 2
1988 Isuzu Trooper: Rear Frame Resurrection Part 1
Переглядів 31111 місяців тому
1988 Isuzu Trooper: Rear Frame Resurrection Part 1
Isuzu Trooper Valve Cover Gasket Replacement
Переглядів 2,8 тис.Рік тому
Isuzu Trooper Valve Cover Gasket Replacement
1988 Isuzu Trooper Slave Cylinder Replacement
Переглядів 541Рік тому
1988 Isuzu Trooper Slave Cylinder Replacement
1988 Isuzu Trooper Bogging Out: Installing New Parts
Переглядів 2,5 тис.Рік тому
1988 Isuzu Trooper Bogging Out: Installing New Parts
1993 Ford Ranger Thermostat Housing Replacement
Переглядів 1,5 тис.Рік тому
1993 Ford Ranger Thermostat Housing Replacement
Ford Ranger New Wheels and Interior Detail
Переглядів 169Рік тому
Ford Ranger New Wheels and Interior Detail
Making a Sub Box for a Regular Cab Ford Ranger
Переглядів 6 тис.Рік тому
Making a Sub Box for a Regular Cab Ford Ranger
1993 Ford Ranger Walkaround - Thanks For 100 Subscribers
Переглядів 834Рік тому
1993 Ford Ranger Walkaround - Thanks For 100 Subscribers
Getting An Old John Deere Tiller Running Again
Переглядів 373Рік тому
Getting An Old John Deere Tiller Running Again
1988 Isuzu Trooper: Sealing Up The Gas Tank
Переглядів 3,7 тис.Рік тому
1988 Isuzu Trooper: Sealing Up The Gas Tank
Hello, i`m from Ukraine, and also too have Isuzu Trooper! Didn't you do a suspension lift? maybe you have some information or video on this theme...
that sounds AWESOME!!!!
@@eurotripper5267 thanks
Did you place the MAF sensor in the intake or no?
@@AgentOrangeeeee you don’t have to do anything to the MAF sensor. The intake is before the MAF.
@@jacksonodonal7960 so what do you plug into the intake?
@ if your just talking about the blue hose that’s a vaccum line.
How has the intake held up for you and has any CEL shown? You change the filter at all?
@ I sold the car to a relative but it’s still going strong he’s put thousands of more miles on it since then and it hasn’t had an issue.
Imagine living on that road and you have crack rock but you won’t smoke it til you get home. Lol
@@JacobStarr-p2k hahaha lesgo
@ I have a 1999 Isuzu trooper 4x4. The cv axel and the balljoints are bad. You want to fix it for me?
@ I’m in Maine I’ll fix it if you’re nearby.
@@jacksonodonal7960 dang. One time someone is nice to me and I’m so far away. I’m in North Carolina. Thanks though for even saying yes to the question.
@ lol damn yeah that’s a little far
Hey man, I've got an 08 Fit and I'm looking into putting an intake on it, did putting this on the car cause a check engine light?
@@landenkulp1556 no it didn’t mine was on already for an o2 sensor but once I replaced that it never came back on again.
JESUS YOU FORGOT THE TOW HOOKS LOL
@@tobyspark1320 in believable
Yk if this will fit good on a 09 fit
@@xenoreaper8329 pop your hood, if your engine looks the same as mine I would say you can use it. If not you might have to grab a different one.
@@jacksonodonal7960can you share the link to the intake set you bought boss man!!
@@xenoreaper8329 www.amazon.com/Rtunes-Racing-Intake-Filter-Compatible/dp/B07FN6Q1SM/ref=mp_s_a_1_2?dib=eyJ2IjoiMSJ9.xLG5yK-9BHufmLng9OdwJ1u-in9IQ4zZp8janHKNgjQG831VJqgSpLWu_GOvFTeZYeYIZHo1kCsj0RBV72sR_eWkX0-QybmzewveoiTsFRDZl7Uo7jCckx5YhsLip4U3k7Y-h_ld_zg9JN16Y6V6DIydzKA5jut4MJUvsrNmkQfYtOJgGtOEb2VpZYBE_6kY22C26tsDpNwil9TmZUxUrw.iFq-htzolyZJprAJFr6NAEYnsK3uNN8hECbmESKLe2I&dib_tag=se&keywords=Cold+air+intake+Honda+fit&qid=1734794488&sr=8-2
Thanks - but maybe buy a dash cam?
@@DavidNotSolomon yeah not my best video at all wasn’t totally planning to upload this one but I ended up doing it anyways.
That is not a cold air intake! It’s a short ram intake. There’s a difference and different purpose for each.
@@belovedLion80 thanks boss
3:05 my doma racing was leaking and didn’t line up at all on my cr85 so i used electrical tape, haven’t tested it yet as the bike is getting a full make over
@CAGYT1 yeah you can usually patch it up 1 time but it’ll never last long
@ thought that tbh, need a new exhaust anyways as the pipe has a lot of cracks and holes in it, any suggestions on what pipe i should get? (i’m on quite a budget
@ definitely go on eBay and Facebook first for exhausts. Mine has an fmf fatty expansion chamber, and an fmf shorty muffler. It’s very loud so keep that in mind but it sounds amazing and opens it up a lot.
@@jacksonodonal7960 okay will do thanks, also is there different models? or will one fit all, may be a stupid question but just curious
Did you ever figure this out? Same issue, same housing. Did you need to put something to help seal the thermostat?
@@DrakeDaraitis yes, if you add one o-ring onto the thermostat it seals it. That fixed it for me. Some one made a video on it I would highly recommend watching.
@jacksonodonal7960 fuuuuck man I don't have the tools to do it again lol. FML. Thank you! What size o ring if you recall? I have a gasket on it already of course.
@ I bought the $9 kit of like 400 o rings at harbor frieght. It was one of those. Just find one that fits the thermostat nice and snug and send it.
@ I’ll definitely check it out, although since my heat works well it’ll have to wait until it warms back up
@ thank you though!
هل هيى مزودة بتيربو
Yes it does
I love your car, mine is green but yours its just perfect. Nice car dude!
why did you not switch out that brake light switch like you said? I came here to see how that was done, but was left with a no-go.
@@saakey that wasn’t my specific problem. My switch worked. Just didn’t have any power.
What size of tyres were these?
@@unonyakundi 31/10.5/15
OMG! What do you want us to watch? The whole video has no meaning except for you shaking the camera back and forth.😂
@@David-v81 it’s not a how to video just me recording what I’m doing like always with no plan.
CAT delete? I have the 2.8 and I'm considering going to a duel inlet 2.25 size pipe cat to a quieter muffler. My Troopers exhaust right now is way too loud and restricted
Hey, sorry for the late reply. Yes, catless 2 inch exhaust. Yeah 2.25 will be fine, Mufflers are pretty restrictive on their own but if you are want to have a free flowing exhaust that's somewhat quiet you can use a few resonators. Or a high flow CAT with a resonator as a muffler. Both would sound good. I'm gonna make a real exhaust for my truck soon so expect to see that soon on the channel.
Can you also do this on the IDSI engine?
The breather sense? where is the slot in your cold air intake?
The slot for the breather hose is tilted downward so that it’s visually cleaner you can put it where ever you want as lost as the filter still fits under the hood.
try to short the exciter wire ( the small red one ) to the frame, the pilot light should go on, if not, your witing harness is in trouble. On these Bish alternators, if the exciter wire is not plugged, your alternator should kick in at about 2500 engine RPM and after it should charge normally. If the harness is OK, check the continuity of the rotor winding, if OK, replace the regulator and have the slip rings resurfaced. To what I see, the most frequent failure is the stator winding that shorts to its frame good luck.
What size are the wheels??
@@unonyakundi 15x8 on 31/10.51R15s
is it isuzu radiator? what brand is that? your new radiator
@@prasarsitek6617 rock auto radiator.
subscribed coz my car is similar to yours😅
@@peoplearecrazy6874 thanks!
We’re did you hook up the wire please help having same problem
Well done for you taking on projects like these and creating these videos! Keep up the good work.
Good job man !
thanks! Definitely some backyard methods but it works!
i would love to see more video with the Isuzu trooper
@@bread2032 yeah man! What kinds of videos? Off roading? Fixing it?
@@bread2032 yeah man! What kinds of videos? Off roading? Fixing it?
I would love to see videos of Installation of parts or upgrades and general stuff like off-roading
@@bread2032 okay I’ll try my best thanyou for the video recommendations I appreciate them
What is the engine? Any issues with the rods?
@@chillplacatetrance9213 no issues with the engine. I know some other people have issues with the head gasket blowing at some point but it’s never happened to me.
@@jacksonodonal7960 I forgot to ask, what's the engine?
@@chillplacatetrance9213 4ze1 2.6l 4 cyl
Iv got a 89 iv been doing work and maintenance on. Just had to do thermostat bypass hose. Pain in the ass Now need to remove e fan previous guy put in. Works enough in winter but not in summer New clutch fan and reinstall shroud
Beautifulllll!!! Recently i had a original troopper model 93. Greetings from Medellin Here is My car... ua-cam.com/video/bVMZ8laVPiw/v-deo.htmlsi=4mrWeQhEbPzDv9MM
Love it so much. My first new car ever was a red 1989 Trooper. Used to take it to Baja California and skiing. Great rig. I wish I still had it. Please do a basic walk around video. Love to see more.
@@cphood yeah sure I’ll make a video on it
Beautifulllll!!! Recently i had a original troopper model 93. Greetings from Medellin Here is My car... ua-cam.com/video/bVMZ8laVPiw/v-deo.htmlsi=4mrWeQhEbPzDv9MM
Necesito información respecto a la conexión de un alambre electrónico en el arnés de de bobina e inyectores le enviaré una fotografía del alambre para quizás puede notarse su conexión gracias
Beautifulllll!!! Recently i had a original troopper model 93. Greetings from Medellin Here is My car ****ua-cam.com/video/S8byrbjW-N8/v-deo.htmlsi=HrEPrQp41t9UdWkJ
Do you know by any chance from what vehicles do front and rear shocks fit on 1st gen Trooper, here in my country there isnt really any market support for them.
Can you get anything shipped to you? Rockauto is available in the US I’m not sure if you have heard of it before? If not eBay is another one to try. It’s a very generic shock absorber design I would say the rear shocks are 3ft long fully extended and the fronts are 2.5ft fully extended. As long as you find a vehicle that used the stud on the top and bushing on the bottom like I have in the video you’ll be golden.
@@jacksonodonal7960 shipping is not worth it, it would be more expensive than shocks, so thats a no go. I think front ones fit from Isuzu Amigo (Opel frontera), but for rear i dont know maybe from montero mk2?
So my cr85 cuts out or bogs down whenever your cruising or full throttle, it has a 125 main. Should I go up to 130? It cuts out and bogs pretty bad at full speed
It’s hard to tell not being there in person. But if I was you I would go ahead and buy a 130 and a 120 and try both. One of those will get you in the right range as long as everything else is in order. Try that and let me know if that works out.
@@jacksonodonal7960 so I switched the main to a 122 because that’s what I heard online was best with the fmf exhaust, it still did the same thing so I ended up trading for a 250 lmao. I appreciate the help tho man!
@@matthewmangrum1739 hey that’s one way to fix it.
Mine needed a top end, so just keep that in mind
That air comp is way too small.
150psi don't matter the cfm is what you want to pay attention too
You need more cfm on your air compressor Bubba.
What is cfm if you don’t mind me asking? How much air it can put out or something?
Trooper is looking great. Love my 1986. If your gas tank doesn’t hold up, I used a brand new tank for an 80’s era Jeep CJ. Practically bolted right up to the trooper. Keep up the good work.
Wow! I wish I knew that before I bought a rust free tank a while ago. Totally would have tried that but that’s great to know for future projects
brotha is never getting this thing inspected
Robots first walk over here
can you share a link to the kit?
www.amazon.com/Rtunes-Racing-Intake-Filter-Compatible/dp/B07FN6Q1SM/ref=mp_s_a_1_2?dib=eyJ2IjoiMSJ9.xLG5yK-9BHufmLng9OdwJ1u-in9IQ4zZp8janHKNgjQG831VJqgSpLWu_GOvFTeZYeYIZHo1kCsj0RBV72sR_eWkX0-QybmzewveoiTsFRDZl7Uo7jCckx5YhsLip4U3k7Y-h_ld_zg9JN16Y6V6DIydzKA5jut4MJUvsrNmkQfYtOJgGtOEb2VpZYBE_6kY22C26tsDpNwil9TmZUxUrw.iFq-htzolyZJprAJFr6NAEYnsK3uNN8hECbmESKLe2I&dib_tag=se&keywords=Cold+air+intake+Honda+fit&qid=1734794488&sr=8-2
🤙🏻 Run like you stole it!!! Awesome
Check out my stroker 12 in my 95 single cab. Heres a link to my youtube video. ua-cam.com/video/7CucyPQN8E0/v-deo.htmlsi=B1JpwB5_iNBUt4TZ
sweet
well I completely missed the part where you installed the seal and gasket - main part and i thought you would tell wether or not to use any sealant or what type
Hi yeah I didn’t show me putting the gasket on the cover I definitely should have but you just put a light coat of the permatex black oil resistant rtv on the whole gasket and a little bit extra on the little rubber half circle on the back of the valve cover. Hope this helps let me know
How much did this cost
50 bucks on amazon
Does it work on 2009 Honda fits?
Es igual al que tengo solamente que no eh me a sido posible armar parte del moto por falta de información del sistema todas las mangueras pues lo compre ya desarmado y no me fue posible que me lo arme el que lo desarmo. El es 4ze1
Could you translate this to English for me? Or I can translate it myself what language do you speak?
@@jacksonodonal7960 Guatemala flores
@@jacksonodonal7960 It is the same as the one I have, except that it has been impossible for me to assemble the engine part due to lack of information on the system of all the hoses because I bought it already disassembled and it was possible for me to have it assembled by the person who disassembled it. It's the 4ze1
@@danielguzman9061 thankyou for translating it
honda fit more like honda fits up your ass
Worth changing out the distributor O-ring seal while in there. Sometimes what looks like a rear VC leak on these is just the cheap o-ring. Easy to pull it out with the valve cover off.
Yeah I’ll try that out it’s been good to me for now though.