Відео

Now 9mm costs as much as 40 😭

Thanks for making this video! Every new gun I clean and run a few basic tests before I fire a single bullet. My very first AR on my very first test and 28 out of 30 rounds the bolt carrier would not seat all the way, cycling live rounds by hand. Your advice was the answer stay safe out there, thanks.

I had a feed issue with the stock magazine. It is going in the trash. The inexpressive, mil-spec aluminum ones work great.

I had a PT45 stove pipe Constantly.

I think this is my problem too. Thanks for sharing.

Stopped watching after I saw he had his rifle on fire. 🤦‍♂️

My experience with trying to solve this problem by increasing buffer weight failed completely. I went ( one weight at a time ) from a standard carbine buffer, all the way to an H3 (3 oz. to 5.6 oz. ) and the only noticeable difference in the ejection pattern was that instead of being anywhere from one thirty to three o clock, it is now consistently at two o clock. A heavier buffer spring might help, but I think an adjustable gas block is probably the best solution.

Dang. Its so common this o-ring issue

We buy sir this how much

500.00 $ My ass

What type of magazine do u use ..

great question, i have the exact same problem but my extractor never came with an Oring. do you have any suggestions what may be the problem ? i checked the gas rings and all the other springs and everything is fine

Just looking for the charge cord

I don't think it's safe to shoot 223 on 556

When clearing a jam... always put the gun on safe and then pull the mag out before you pull the charging handle or the slide back

I have lr 308 and had issues at freezing temps. Thought oil. Or steel case. Removed the o ring after many other things. Think o ring gets super hard when cold.

I haven’t shot my new build yet and I was wondering if I should take out the O ring first?

Garage. 20 minutes on a full charge I got 2 . They don’t even sell em anymore

300$ gun experts are everywhere

Thanks for the tip.

What mags I must have missed that?

I live in Tn. Wal mart dont sell nothing but shotgun shells. If that.

I have seen this in other videos.

Have you done any reviews of these and/or other range ammo?

Mine had the MFT furniture. 86'd the grip for a magpul, traded out the trigger guard as well.[also magpul] I was surprised by the stock. Only retractable I have ever liked. It's 100% solid no wiggle, no jiggle. Even when extended fully.

This is a great light. Mine is all black in color but the same I believe.

How is the ar holding up after 7 years?

Hi, do the mag pull magazines work well with this gun? And are there any other mags you’d recommend for it? I’ve heard the factory magazines aren’t all that good.

No results?!

You don't load AR mags like pistol mags just push the rounds straight in the top no sliding is necessary

Some rifles need more than a heavier buffer some need stronger buffer spring. My ar got a springco red extra power spring now ejects at slightly more then 3 o'clock position, some commercially available ars come over gassed gas port hole in barrel is over sized, tried all buffer weights it did not change pattern, changed spring worked first time..

Subscribed for the HHH report.

Thank you.

Great! I had to do this to a recent build an so many people talked shit to me saying that wasn't the problem blah blah. Anything that adds spring pressure to friction point is going to reduce cycling power. I've found with common sense an a understand for physics you can pretty much get any gun to work or even make your own gun.

It hurt my soul to watch u load the ar mag like that

That's cool. Where's the AK shop 😂

very nice I have one on order.............are you putting a red dot on?

And they send them a bit higher gassed as it's easier for civilian use and less jam option.

push ammo straight down. ARs are NOT loaded like a handgun magazine. That's why it was tough for you.

Nice vid . I have the exact bolt and going through the exactly the same thing.

Whwn you seat the Rounds in the Mag. you have to smack the Mag. on Something HARD!! Maybe 2 Times if need be!!

Has this ever been changed 5 years later? so that one hole is good for QD cups goes right in but where does the other one go? also as far as the foregrip you need a mount? i thought the gun is advertised as mlok rail. Havent got the gun yet just trying to figure it all out.

So useful! Thanks for posting.

Uh, that isn't how you load a rifle magazine. Actually never seen anyone try that. No wonder it's giving you hell. Buy a speedloader. Push straight down into the mag, up to 20 at a time with the one I use. Now, back to the video! A heavier bolt carrier group? Let us know how that goes.

I still everything you said but mines still doesn’t work. The bolt carrier does not connect to the battery. While the upper and lower and still apart if I move the bolt carrier to the left just a tad bit and then push in then it will work. This is a brand new ar 15 so idk why it’s having this problem

The thing I'll never understand is how a company can sell an AR for 3k with no optics. I've built ARs with all top-end components and I had to try REALLY hard to spend 2k, it's all about the name.

so what if your gas pushed the buffer so hard to the rear it damaged the buffer?

All you have to do is use it. The heat from a few rounds will flex the O ring and loosen the tension on the extractor. And make sure that everything is properly lubricated.

What if it ejects 430-5 o'clock, but really far?

This would have been supremely useful if you actually shot them and compared the groups out of one or two pistols.